Re: How can I reinstall the Unity Launcher


On 11-11-07 03:21 PM, W. Scott Lockwood III wrote:

" apt-get install unity-2d-launcher_4.12.0-0ubuntu1_i386.deb" should be
"sudo dpkg -I unity-2d-launcher_4.12.0-0ubuntu1_i386.deb" and give us the
output of that.


-------------------------------------------------------------------------------------------
..
..
..

On 11-11-07 06:06 PM, Gerry Boland wrote:

You could try

sudo apt-get install --reinstall unity

just to see if it helps.
..
..
..

Hey,
those lockfile errors mean you're missing "sudo"

But also when installing a deb file manually, you need to use

sudo dpkg -i filename.deb

However if you can boot to a command prompt at all, and are using
wired connection, try

sudo apt-get install unity-2d

which should get you going. Note that you need to select "Ubuntu2D" in
the login screen to actually
boot to it. This option is hidden under the "cog" to the right of the
password prompt.
-G

Messieurs

Lockwood and Boland,



First, I'd like to thank you both for your help.

Second, A bit of my own foolishness.

When I tried to recover from my error I:
1. booted into 'recovery' mode, 2nd item on the default LILO menu.
2. selected the last item on the list. (This mounts the / as
read only.)

When I took the time to actually read ALL of the choices on that
list I found that the 2nd or 3rd choice was to reboot and mount / as
read/write.


After selecting that option I ran 3 of the 4 suggestions you mentioned
above.

I redirected the results to a file the contents of which you can see below.

After each command had run I rebooted to the GUI. Though I could not log
in after the first 2 commands I was able to after the 3rd. Everything
now seems to be as it was before I cause this headache for myself.

That being said it was a good experience, remembering/relearning some of
what I had forgot from so long ago.

Thanks again for you help!

P.S. You may notice that I had to prepend the filenames with ./ as the
system could not find them otherwise.

------------------------------------------------------------------------------------------------------

sudo dpkg -I ./unity-2d-launcher_4.12.0-0ubuntu1_i386.deb
new debian package, version 2.0.
size 64266 bytes: control archive= 1447 bytes.
921 bytes, 16 lines control
1991 bytes, 23 lines md5sums
Package: unity-2d-launcher
Source: unity-2d
Version: 4.12.0-0ubuntu1
Architecture: i386
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@xxxxxxxxxxxxxxxx>
Installed-Size: 300
Depends: libc6 (>= 2.0), libdconf-qt0 (>= 0.0.0.110722), libgcc1 (>=
1:4.1.1), libqt4-dbus (>= 4:4.6.1), libqt4-declarative (>= 4:4.7.0~rc1),
libqtcore4 (>= 4:4.6.1), libqtgui4 (>= 4:4.5.3), libstdc++6 (>= 4.1.1),
libunity-2d-private0 (= 4.12.0-0ubuntu1), libutouch-geis1 (>= 1.0.8),
unity-asset-pool, libqt4-svg
Recommends: unity-lens-files, unity-lens-applications, unity-lens-music
Section: x11
Priority: optional
Description: Unity 2D Launcher
The Unity 2D launcher displays a list of running applications as well as a
list of favorite applications in a panel at the left of the screen.
Notifications from individual applications are also highlighted in the
launcher.
Original-Maintainer: Olivier Tilloy <olivier.tilloy@xxxxxxxxxxxxx>

------------------

sudo apt-get install --reinstall unity
Reading package lists...
Building dependency tree...
Reading state information...
The following packages were automatically installed and are no longer
required:
python-compizconfig unity-2d-spread unity-2d-places
Use 'apt-get autoremove' to remove them.
0 upgraded, 0 newly installed, 1 reinstalled, 0 to remove and 23 not
upgraded.
Need to get 0 B/906 kB of archives.
After this operation, 0 B of additional disk space will be used.
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 219538 files and directories currently installed.)
Preparing to replace unity 4.24.0-0ubuntu2b1 (using
.../unity_4.24.0-0ubuntu2b1_i386.deb) ...
Unpacking replacement unity ...
Processing triggers for man-db ...
Setting up unity (4.24.0-0ubuntu2b1) ...

------------------

sudo apt-get install unity-2d
Reading package lists...
Building dependency tree...
Reading state information...
The following package was automatically installed and is no longer required:
python-compizconfig
Use 'apt-get autoremove' to remove them.
The following extra packages will be installed:
unity-2d-launcher
The following NEW packages will be installed
unity-2d unity-2d-launcher
0 upgraded, 2 newly installed, 0 to remove and 23 not upgraded.
Need to get 0 B/68.7 kB of archives.
After this operation, 451 kB of additional disk space will be used.
Do you want to continue [Y/n]? Selecting previously deselected package
unity-2d-launcher.
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 219538 files and directories currently installed.)
Unpacking unity-2d-launcher (from
.../unity-2d-launcher_4.12.0-0ubuntu1_i386.deb) ...
Selecting previously deselected package unity-2d.
Unpacking unity-2d (from .../unity-2d_4.12.0-0ubuntu1_all.deb) ...
Processing triggers for gnome-menus ...
Processing triggers for desktop-file-utils ...
Processing triggers for bamfdaemon ...
Rebuilding /usr/share/applications/bamf.index...
Processing triggers for man-db ...
Processing triggers for gconf2 ...
Processing triggers for libglib2.0-0 ...
Setting up unity-2d-launcher (4.12.0-0ubuntu1) ...
Setting up unity-2d (4.12.0-0ubuntu1) ...

------------------



--
Udvarias Ur

This letter was generated and sent from Thunderbird on Ubuntu Linux.

--
ubuntu-users mailing list
ubuntu-users@xxxxxxxxxxxxxxxx
Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-users

Relevant Pages

  • Re: How can I reinstall the Unity Launcher
    ... sudo apt-get install --reinstall unity ... new debian package, version 2.0. ... Description: Unity 2D Launcher ... (Reading database ... ...
    (Ubuntu)
  • Re: Skype and Multiarch
    ... This is what I get when I install skype. ... Selecting previously unselected package skype. ... (Reading database ... ... dpkg: dependency problems prevent configuration of skype: ...
    (Debian-User)
  • Re: X configuration
    ... attempting to install it is ... The following NEW packages will be installed: ... (Reading database ... ... I do have xfonts-artwiz installed. ...
    (Debian-User)
  • Re: ooRexx 3.1.2 Available
    ... site and have attempted to install it using both dpkg -i and GDebi. ... (Reading database ... ... Removing oorexx ... ... This program and the accompanying materials ...
    (comp.lang.rexx)