Re: Serial port sniffer

"RedLars" <Liverpool1892@xxxxxxxxx> wrote in message
news:1140716180.194658.27490@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Can anyone recommend a serialport sniffer/monitor for linux? Need to
know what data is sent/received and it's settings (baud, parity, bits
etc).

I've always preferred to just to wire the port to another computer's 2
serial ports for watching data.

Of course, if you don't know the baud rate that wouldn't work

--
LTP

:)


.

Relevant Pages

  • ProTERM 3.1 macros for 115,200 Baud Support
    ... Here are the ProTERM 3.1 Global Macros I promised to support 115,200 baud ... Zilog SCC capability on the Apple IIGS built-in serial ports. ... ports, you'll get a message informing this, and the macro is cancelled. ...
    (comp.sys.apple2)
  • Re: IIGS 115,200 Baud Serial Port - How?
    ... serial ports (Zilog 8530 SCC chip) max out at 57,600 baud. ... When pros like David Empson say so, ...
    (comp.sys.apple2)
  • Re: Sixteen serial ports ?
    ... I would like to use a Spartan 3 100K FPGA to implement 16 ... 115200 baud, Tx, Rx, and two flow control lines per port. ... Is there a better way to build sixteen serial ports? ...
    (comp.arch.fpga)
  • Sixteen serial ports ?
    ... I would like to use a Spartan 3 100K FPGA to implement 16 ... 115200 baud, Tx, Rx, and two flow control lines per port. ... This would chew up a lot of the FPGA. ... Is there a better way to build sixteen serial ports? ...
    (comp.arch.fpga)
  • [PATCH -rt] Buggy uart (for 2.6.16)
    ... I've noticed that you dropped my "buggy uart" patch. ... long PARITY; ... BAUD = B38400; ... } //end of switch baud_rate ...
    (Linux-Kernel)