routing between subnets

From: Indrek M. (indrekm_at_noavv.ee)
Date: 07/31/03 

Date: Thu, 31 Jul 2003 14:56:33 +0300

I have NAT router (R.H7.3) with 2 subnets (eth1 and eth2), eth0 go to
internet.
>From both subnet can go to internet.
But I want go from one subnet to second.
How can tat do? IPTABLES default policys are all ACCEPT and NAT work
well.

       | internet
       | eth0
       |
       |
       |
  -----------
  | Router |
  | |
  -----------
    | |
    | |
    | eth2
    | 192.168.11.1/24
 eth1
192.168.10.1/24

Relevant Pages

  • Re: routing between subnets
    ... > From both subnet can go to internet. ... > But I want go from one subnet to second. ... IPTABLES default policys are all ACCEPT and NAT work ... before it hits any masq rules. ...
    (comp.os.linux.networking)
  • routing between subnets
    ... >From both subnet can go to internet. ... But I want go from one subnet to second. ... IPTABLES default policys are all ACCEPT and NAT work ...
    (comp.os.linux.networking)
  • Re: Routing and RRAS Problem - Pleasehelp
    ... Traffic from your "internal" subnet can get ... out to the Internet by default routing, but the return traffic will fail. ... You need to add an extra route to the Linksys router so that it knows how to ...
    (microsoft.public.windows.server.networking)
  • Re: Problem with IPSEC
    ... rules like this work on an internal subnet. ... addresses or even a subnet on the internet it doesn't work. ... Turn off IPSEC. ... yes ipsec filters are weighted such that a specific rule ...
    (microsoft.public.windows.server.security)
  • Re: Routing and RRAS Problem - Pleasehelp
    ... use RRAS but if will fail I will run RRAS server as NAT Router, ... Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net ... Traffic from your "internal" subnet can get ... You need to add an extra route to the Linksys router so that it knows how to ...
    (microsoft.public.windows.server.networking)