suse freezes on hda8
From: Jost Ammon (jost.ammon_at_gmx.de)
Date: 11/18/03
- Next message: baskitcaise: "Re: many socket connections - it is normally!?!?"
- Previous message: Kevin Nathan: "Re: Funky Fonts In Opera"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Date: Tue, 18 Nov 2003 23:58:09 +0100
I have hda1=vfat (mountpoint windoze_c), hda5=linux swap, hda6=linux ext2
(debian -mountpoint /), hda7=vfat (mountpoint windoze_d), hda8=linux ext2
(suse - mountpoint /), hda9=linux sxt2 (suse - mountpoint /home),
hda10=linux swap.
A couple of weeks ago my suse 8.0 (hda8) started to freeze right during
various applications for no particular reason, so I had to cold-start.
After a while I even had to perform fsck in read-only su mode while booting.
At that point I installed the 9.0, formatting hda8 but keeping ext2 as fs.
The 9.0 worked well initially but then started also to crash in ever
shorter uptime periods, each time with a manual fsck needed in read-only
mood as su.
The /var/log/boot.msg didn't give me any hint (copy beneath).
Now I'm working in my debian partition and when I mount the suse-system on
hda8 trying to work on data stored there, sometimes applications crash
(KView), sometimes they work fine (kedit). However I can kill the process
once it crashes. Same is true for hda9.
I am quite without orientation what the problem might be and how I could
possibly fix it, I even don't know where to start. Can it be a physical
problem? In fact the debian and the windoze partitions do work well, while
the problem occurred also with the previous suse 8.0 system on the same
partition. Would an installation of suse 9.0 with a different filesystem
bring an improvement? And which one should I use - the partition is 4.8 GB.
I think I can rule out particular applications being responsible for the
crashes, because there was no obvious relation.
Any help appreciated,
Jost
Inspecting /boot/System.map-2.4.21-99-default
Loaded 21414 symbols from /boot/System.map-2.4.21-99-default.
Symbols match kernel version 2.4.21.
Loaded 150 symbols from 8 modules.
klogd 1.4.1, log source = ksyslog started.
<4>Linux version 2.4.21-99-default (root@i386.suse.de) (gcc version 3.3.1
(SuSE Linux)) #1 Wed Sep 24 13:30:51 UTC 2003
<6>BIOS-provided physical RAM map:
<4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
<4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
<4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
<4> BIOS-e820: 0000000000100000 - 0000000007ffc000 (usable)
<4> BIOS-e820: 0000000007ffc000 - 0000000007fff000 (ACPI data)
<4> BIOS-e820: 0000000007fff000 - 0000000008000000 (ACPI NVS)
<4> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
<5>885MB vmalloc/ioremap area available.
<5>0MB HIGHMEM available.
<5>127MB LOWMEM available.
<7>ACPI: have wakeup address 0xc0001000
<4>On node 0 totalpages: 32764
<4>zone(0): 4096 pages.
<4>zone(1): 28668 pages.
<4>zone(2): 0 pages.
<6>ACPI: RSDP (v000 ASUS ) @ 0x000f61b0
<6>ACPI: RSDT (v001 ASUS MED_2001 12336.12337) @ 0x07ffc000
<6>ACPI: FADT (v001 ASUS MED_2001 12336.12337) @ 0x07ffc080
<6>ACPI: BOOT (v001 ASUS MED_2001 12336.12337) @ 0x07ffc040
<6>ACPI: DSDT (v001 ASUS MED_2001 00000.04096) @ 0x00000000
<5>ACPI: Skipping APIC setup
<4>Building zonelist for node : 0
<4>Kernel command line: auto BOOT_IMAGE=Linux root=308 splash=silent
desktop hdc=ide-scsi hdclun=0
<6>bootsplash: silent mode.
<6>ide_setup: hdc=ide-scsi
<6>ide_setup: hdclun=0
<6>Initializing CPU#0
<4>Detected 997.600 MHz processor.
<4>Console: colour dummy device 80x25
<4>Calibrating delay loop... 1953.79 BogoMIPS
<6>Memory: 125996k/131056k available (1590k kernel code, 4672k reserved,
605k data, 160k init, 0k highmem)
<6>Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)
<6>Inode cache hash table entries: 8192 (order: 4, 65536 bytes)
<6>Mount cache hash table entries: 512 (order: 0, 4096 bytes)
<4>Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
<4>Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>CPU: L1 I cache: 16K, L1 D cache: 16K
<6>CPU: L2 cache: 256K
<6>Intel machine check architecture supported.
<6>Intel machine check reporting enabled on CPU#0.
<7>CPU: After generic, caps: 0383f9ff 00000000 00000000 00000000
<7>CPU: Common caps: 0383f9ff 00000000 00000000 00000000
<4>CPU: Intel Pentium III (Coppermine) stepping 06
<6>Enabling fast FPU save and restore... done.
<6>Enabling unmasked SIMD FPU exception support... done.
<6>Checking 'hlt' instruction... OK.
<4>POSIX conformance testing by UNIFIX
<4>mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
<4>mtrr: detected mtrr type: Intel
<6>ACPI: Subsystem revision 20030619
<6>PCI: PCI BIOS revision 2.10 entry at 0xf0900, last bus=1
<6>PCI: Using configuration type 1
<6>Looking for DSDT in initrd ... not found!
<6>ACPI: Interpreter enabled
<6>ACPI: Using PIC for interrupt routing
<6>ACPI: System [ACPI] (supports S0 S1 S4 S5)
<4>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
<6>ACPI: PCI Root Bridge [PCI0] (00:00)
<4>PCI: Probing PCI hardware (bus 00)
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
<6>PCI: Probing PCI hardware
<4>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
<7>00:00:04[A] -> IRQ 5 Mode 1 Trigger 1
<4>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
<7>00:00:04[B] -> IRQ 11 Mode 1 Trigger 1
<4>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9
<7>00:00:04[C] -> IRQ 9 Mode 1 Trigger 1
<4>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
<7>00:00:04[D] -> IRQ 10 Mode 1 Trigger 1
<7>PIC: IRQ (9) already programmed
<7>PIC: IRQ (10) already programmed
<7>PIC: IRQ (5) already programmed
<7>PIC: IRQ (11) already programmed
<7>PIC: IRQ (10) already programmed
<7>PIC: IRQ (5) already programmed
<7>PIC: IRQ (11) already programmed
<7>PIC: IRQ (9) already programmed
<7>PIC: IRQ (5) already programmed
<7>PIC: IRQ (11) already programmed
<7>PIC: IRQ (9) already programmed
<7>PIC: IRQ (10) already programmed
<7>PIC: IRQ (5) already programmed
<7>PIC: IRQ (11) already programmed
<7>PIC: IRQ (9) already programmed
<6>PCI: Using ACPI for IRQ routing
<6>PCI: if you experience problems, try using option 'pci=noacpi' or even
'acpi=off'
<6>PCI: Disabling Via external APIC routing
<6>Linux NET4.0 for Linux 2.4
<6>Based upon Swansea University Computer Society NET3.039
<4>Initializing RT netlink socket
<6>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
<5>apm: overridden by ACPI.
<4>PISCH: Plug In Scheduler Interface (Version 6)
<4>Starting kswapd
<4>bigpage subsystem: allocated 0 bigpages (=0MB).
<4>kinoded started
<5>VFS: Disk quotas vdquot_6.5.1
<5>aio_setup: num_physpages = 8191
<5>aio_setup: sizeof(struct page) = 48
<6>vesafb: framebuffer at 0xf0000000, mapped to 0xc881e000, size 32768k
<6>vesafb: mode is 1280x1024x16, linelength=2560, pages=1
<6>vesafb: protected mode interface info at c000:0f03
<6>vesafb: scrolling: redraw
<6>vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
<6>bootsplash 3.0.9-2003/09/08: looking for picture.... silenjpeg size
30981 bytes, found (1280x1024, 15663 bytes, v3).
<6>bootsplash: silent jpeg found.
<6>bootsplash: silent jpeg found.
<4>Console: switching to colour frame buffer device 148x51
<6>fb0: VESA VGA frame buffer device
<4>pty: 256 Unix98 ptys configured
<6>Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT
SHARE_IRQ SERIAL_PCI enabled
<6>ttyS00 at 0x03f8 (irq = 4) is a 16550A
<6>ttyS01 at 0x02f8 (irq = 3) is a 16550A
<6>Real Time Clock Driver v1.10e
<6>Floppy drive(s): fd0 is 1.44M
<6>FDC 0 is a post-1991 82077
<4>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
<6>loop: loaded (max 16 devices)
<6>Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
<6>ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
<6>VP_IDE: IDE controller at PCI slot 00:04.1
<6>VP_IDE: chipset revision 16
<6>VP_IDE: not 100%% native mode: will probe irqs later
<6>VP_IDE: VIA vt82c686a (rev 22) IDE UDMA66 controller on pci00:04.1
<6> ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:DMA
<6> ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:DMA, hdd:pio
<4>hda: ST340823A, ATA DISK drive
<4>hdb: LITEON DVD-ROM LTD122, ATAPI CD/DVD-ROM drive
<4>blk: queue c03bf900, I/O limit 4095Mb (mask 0xffffffff)
<4>hdc: SONY CD-RW CRX140E, ATAPI CD/DVD-ROM drive
<4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
<4>ide1 at 0x170-0x177,0x376 on irq 15
<4>hda: attached ide-disk driver.
<4>hda: host protected area => 1
<6>hda: 78165360 sectors (40021 MB) w/1024KiB Cache, CHS=4865/255/63,
UDMA(66)
<6>ide-floppy driver 0.99.newide
<6>Partition check:
<6> hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 hda10 >
<6>ide-floppy driver 0.99.newide
<6>md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
<6>md: Autodetecting RAID arrays.
<6>md: autorun ...
<6>md: ... autorun DONE.
<6>NET4: Linux TCP/IP 1.0 for NET4.0
<6>IP Protocols: ICMP, UDP, TCP, IGMP
<6>IP: routing cache hash table of 512 buckets, 4Kbytes
<6>TCP: Hash tables configured (established 8192 bind 16384)
<6>Linux IP multicast router 0.06 plus PIM-SM
<6>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
<6>cryptoapi: loaded
<5>RAMDISK: Compressed image found at block 0
<6>Freeing initrd memory: 175k freed
<4>VFS: Mounted root (ext2 filesystem).
<4>VFS: Mounted root (ext2 filesystem) readonly.
<5>Trying to move old root to /initrd ... failed
<5>Unmounting old root
<5>Trying to free ramdisk memory ... okay
<6>Freeing unused kernel memory: 160k freed
<6>md: Autodetecting RAID arrays.
<6>md: autorun ...
<6>md: ... autorun DONE.
<6>Adding Swap: 329292k swap-space (priority 42)
<6>Adding Swap: 265032k swap-space (priority 42)
<4>MSDOS FS: IO charset iso8859-1
<4>MSDOS FS: IO charset iso8859-1
<4>hdb: attached ide-cdrom driver.
<6>hdb: ATAPI 40X DVD-ROM drive, 512kB Cache
<6>Uniform CD-ROM driver Revision: 3.12
<6>SCSI subsystem driver Revision: 1.00
<4>hdc: attached ide-scsi driver.
<6>scsi0 : SCSI host adapter emulation for IDE ATAPI devices
<4> Vendor: SONY Model: CD-RW CRX140E Rev: 1.0s
<4> Type: CD-ROM ANSI SCSI revision: 02
Kernel logging (ksyslog) stopped.
Kernel log daemon terminating.
Boot logging started on /dev/tty1(/dev/console) at Tue Nov 18 23:00:09 2003
<notice>run boot scripts (setserial boot.proc)
Configuring serial ports...
ttyS0 at 0x03f8 (irq = 4) is a 16550A
ttyS1 at 0x02f8 (irq = 3) is a 16550A
Configured serial ports
done<notice>exit status of (setserial boot.proc) is (0 0)
<notice>run boot scripts (boot.md)
<notice>exit status of (boot.md) is (0)
<notice>run boot scripts (boot.lvm)
<notice>exit status of (boot.lvm) is (0)
<notice>run boot scripts (boot.localfs)
Activating swap-devices in /etc/fstab...
doneChecking file systems...
fsck 1.34 (25-Jul-2003)
/dev/hda8: clean, 207089/641280 files, 1021035/1281175 blocks
/dev/hda9: clean, 95810/864960 files, 1187710/1726979 blocks
doneMounting local file systems...
proc on /proc type proc (rw)
devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
/dev/hda9 on /home type ext2 (rw)
/dev/hda1 on /windows/C type vfat
(rw,noexec,nosuid,nodev,gid=100,umask=0002,iocharset=iso8859-1,code=437)
/dev/hda7 on /windows/D type vfat
(rw,noexec,nosuid,nodev,gid=100,umask=0002,iocharset=iso8859-1,code=437)
done<notice>exit status of (boot.localfs) is (0)
<notice>run boot scripts (boot.crypto)
<notice>exit status of (boot.crypto) is (0)
<notice>run boot scripts (boot.swap boot.scpm boot.restore_permissions
boot.loadmodules)
Activating remaining swap-devices in /etc/fstab...
doneMounting shared memory FS on /dev/shmdone
Restore device permissionsdone
Loading required kernel modules
done<notice>exit status of (boot.swap boot.scpm boot.restore_permissions
boot.loadmodules) is (0 0 0 0)
<notice>run boot scripts (boot.idedma boot.clock)
Setting up the CMOS clockdone
<notice>exit status of (boot.idedma boot.clock) is (0 0)
<notice>run boot scripts (boot.ldconfig)
Setting up timezone datadone
<notice>exit status of (boot.ldconfig) is (0)
<notice>run boot scripts (boot.sched boot.localnet boot.isapnp)
Setting scheduling timeslices unused
Setting up hostname 'linux'done
Setting up loopback interface done
<notice>exit status of (boot.sched boot.localnet boot.isapnp) is (6 0 0)
<notice>run boot scripts (boot.klog boot.ipconfig)
Enabling syn flood protectiondone
Disabling IP forwardingdone
Creating /var/log/boot.msg
done<notice>killproc: kill(25,29)
System Boot Control: The system has been setup
Skipped features: boot.sched
System Boot Control: Running /etc/init.d/boot.local
<notice>exit status of (boot.klog boot.ipconfig) is (0 0)
done<notice>killproc: kill(25,3)
Boot logging started on /dev/tty1(/dev/console) at Tue Nov 18 22:00:20 2003
Master Resource Control: previous runlevel: N, switching to runlevel: 5
<notice>start services (random isdn)
Initializing random number generatordone
<notice>exit status of (random isdn) is (0 0)
<notice>start services (network)
Setting up network interfaces:
lo done
eth0 done
dsl1 manual
<notice>exit status of (network) is (0)
<notice>start services (syslog)
Starting syslog services<notice>startproc: execve (/sbin/syslogd) [
/sbin/syslogd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh
progress=19 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 AUTOBOOT=YES
COLUMNS=148 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5
PWD=/ PREVLEVEL=N LINES=51 HOME=/ SHLVL=2 BOOT_IMAGE=Linux splash=silent
sscripts=38 _=/sbin/startproc DAEMON=/sbin/syslogd ]
<notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -2 ], [
CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=19
INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 AUTOBOOT=YES COLUMNS=148
PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 PWD=/
PREVLEVEL=N LINES=51 HOME=/ SHLVL=2 BOOT_IMAGE=Linux splash=silent
sscripts=38 _=/sbin/startproc DAEMON=/sbin/klogd ]
done
<notice>exit status of (syslog) is (0)
<notice>start services (hotplug)
Starting hotplugging services [ ieee1394 net pci usb .... ]done
<notice>exit status of (hotplug) is (0)
<notice>start services (resmgr)
Starting resource manager<notice>startproc: execve (/sbin/resmgrd) [
/sbin/resmgrd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh
progress=21 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 AUTOBOOT=YES
COLUMNS=148 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5
PWD=/ PREVLEVEL=N LINES=51 HOME=/ SHLVL=2 BOOT_IMAGE=Linux splash=silent
sscripts=38 _=/sbin/startproc DAEMON=/sbin/resmgrd ]
done
<notice>exit status of (resmgr) is (0)
<notice>start services (splash_early smbfs portmap)
<notice>startproc: execve (/sbin/portmap) [ /sbin/portmap ], [
CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=22
INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 AUTOBOOT=YES COLUMNS=148
PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 PWD=/
PREVLEVEL=N LINES=51 HOME=/ SHLVL=2 BOOT_IMAGE=Linux splash=silent
sscripts=38 _=/sbin/startproc DAEMON=/sbin/portmap ]
Starting RPC portmap daemondone
Mount SMB File System unused
<notice>exit status of (splash_early smbfs portmap) is (0 6 0)
<notice>start services (sshd smpppd fbset alsasound acpid)
<notice>startproc: execve (/usr/sbin/smpppd) [ /usr/sbin/smpppd ], [
CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=25
INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 AUTOBOOT=YES COLUMNS=148
PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 PWD=/
PREVLEVEL=N LINES=51 HOME=/ SHLVL=2 BOOT_IMAGE=Linux splash=silent
sscripts=38 _=/sbin/startproc DAEMON=/usr/sbin/smpppd ]
Starting SMPPPDdone
<notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o
PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console TERM=linux
SHELL=/bin/sh progress=25 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1
AUTOBOOT=YES COLUMNS=148 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin
RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=51 HOME=/ SHLVL=2 BOOT_IMAGE=Linux
splash=silent sscripts=38 _=/sbin/startproc DAEMON=/usr/sbin/sshd ]
Starting SSH daemondone
<notice>startproc: execve (/usr/sbin/acpid) [ /usr/sbin/acpid ], [
CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=25
INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 AUTOBOOT=YES COLUMNS=148
PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 PWD=/
PREVLEVEL=N LINES=51 HOME=/ SHLVL=2 BOOT_IMAGE=Linux splash=silent
sscripts=38 _=/sbin/startproc DAEMON=/usr/sbin/acpid ]
^GLoading ACPI modules (ac battery button fan processor thermal ) done
Starting acpid done
Starting sound driver: ens1371done
Restoring the previous sound settingdone
<notice>exit status of (sshd smpppd fbset alsasound acpid) is (0 0 0 0 0)
<notice>start services (splash postfix kbd cups)
<notice>startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [
CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=30
INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 AUTOBOOT=YES COLUMNS=148
PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 PWD=/
PREVLEVEL=N LINES=51 HOME=/ SHLVL=2 BOOT_IMAGE=Linux splash=silent
sscripts=38 _=/sbin/startproc DAEMON=/usr/sbin/cupsd ]
Starting cupsddone
Starting mail service (Postfix)done
Loading keymap qwertz/de-latin1-nodeadkeys.map.gz
doneLoading compose table latin1.adddone
Stop Unicode mode
doneLoading console font lat9w-16.psfu -m trivial (B
done<notice>exit status of (splash postfix kbd cups) is (0 0 0 0)
<notice>start services (nscd hwscan cron)
Starting hardware scan on boot<notice>startproc: execve (/usr/sbin/cron) [
/usr/sbin/cron ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh
progress=34 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 AUTOBOOT=YES
COLUMNS=148 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5
PWD=/ PREVLEVEL=N LINES=51 HOME=/ SHLVL=2 BOOT_IMAGE=Linux splash=silent
sscripts=38 _=/sbin/startproc DAEMON=/usr/sbin/cron ]
<notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [
CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=34
INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 AUTOBOOT=YES COLUMNS=148
PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 PWD=/
PREVLEVEL=N LINES=51 HOME=/ SHLVL=2 BOOT_IMAGE=Linux splash=silent
sscripts=38 _=/sbin/startproc DAEMON=/usr/sbin/nscd ]
Starting Name Service Cache Daemondone
Starting CRON daemondone
<notice>exit status of (nscd hwscan cron) is (0 0 0)
<notice>start services (xdm splash_late)
Starting service kdm<notice>startproc: execve (/opt/kde3/bin/kdm) [
/opt/kde3/bin/kdm ], [ LC_MONETARY= CONSOLE=/dev/console TERM=linux
SHELL=/bin/sh LC_NUMERIC= QTDIR=/usr/lib/qt3 LC_ALL= progress=37
INIT_VERSION=sysvinit-2.82 KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1
AUTOBOOT=YES COLUMNS=148 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin
LC_MESSAGES= RUNLEVEL=5 LC_COLLATE= PWD=/ LANG=de_DE@euro PREVLEVEL=N
LINES=51 HOME=/ SHLVL=2 BOOT_IMAGE=Linux
XCURSOR_THEME=blueprint-cursor-theme no_proxy=localhost
WINDOWMANAGER=/usr/X11R6/bin/kde LC_CTYPE=de_DE@euro splash=silent
sscripts=38 LC_TIME= _=/sbin/startproc DAEMON=/opt/kde3/bin/kdm ]
done
<notice>exit status of (xdm splash_late) is (0 0)
Master Resource Control: runlevel 5 has been reached
Skipped services in runlevel 5: smbfs
<notice>killproc: kill(635,3)
- Next message: baskitcaise: "Re: many socket connections - it is normally!?!?"
- Previous message: Kevin Nathan: "Re: Funky Fonts In Opera"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Relevant Pages
|
