Re: lite-on burner, suse 8.2
From: Jack D. (jack_at_romixinc.com)
Date: 11/24/03
- Next message: Hawkeye: "Re: NVIDIA and 24-bit color"
- Previous message: Big Daddy: "Re: Setting SCSI emulation for ATAPE devices"
- In reply to: Maarten Rütten: "lite-on burner, suse 8.2"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Date: 23 Nov 2003 21:21:52 -0800
If you have drive problems, I know a website that is dedicated to
resolve problem that consumers have with storage devices such as CD
and/or DVD Burners. There website is http://www.nobssupport.com.
Maarten Rütten <Maarten@Su.SE> wrote in message news:<_C1wb.254871$di.56656769@amsnews02.chello.com>...
> Hey,
>
> I've tried to burn cd's under SuSE 8.2 pro several times with my lite-on
> burner, but it gets stuck somewhere half way and gives an error in all
> cd-writing programs.
>
> This is the log that 'cd bake oven' gives:
>
> Starting ISO creation process!
> mkisofs 2.0 (i686-suse-linux)
> Writing: Initial Padbock Start Block 0
> Done with: Initial Padbock Block(s) 16
> Writing: Primary Volume Descriptor Start Block 16
> Done with: Primary Volume Descriptor Block(s) 1
> Writing: Joliet Volume Descriptor Start Block 17
> Done with: Joliet Volume Descriptor Block(s) 1
> Writing: End Volume Descriptor Start Block 18
> Done with: End Volume Descriptor Block(s) 1
> Writing: Version block Start Block 19
> Done with: Version block Block(s) 1
> Writing: Path table Start Block 20
> Done with: Path table Block(s) 4
> Writing: Joliet path table Start Block 24
> Done with: Joliet path table Block(s) 4
> Writing: Directory tree Start Block 28
> Done with: Directory tree Block(s) 1
> Writing: Joliet directory tree Start Block 29
> Done with: Joliet directory tree Block(s) 1
> Writing: Directory tree cleanup Start Block 30
> Done with: Directory tree cleanup Block(s) 0
> Writing: Extension record Start Block 30
> Done with: Extension record Block(s) 1
> Writing: The File(s) Start Block 31
> Creating ISO image, percent done:
> 100%
> Total translation table size: 0
> Total rockridge attributes bytes: 258
> Total directory bytes: 0
> Path table size(bytes): 10
> Done with: The File(s) Block(s) 358383
> Writing: Ending pad block Start Block 358414
> Done with: Ending pad block Block(s) 18
> Max brk space used 57e4
> 358432 extents written (700 Mb)
> ISO image created successfully!
> Starting burn process!
> cdrecord: Warning: not running as root user, fs= option ignored.
> scsidev: '00,00,00'
> scsibus: 0 target: 0 lun: 0
> Linux sg driver version: 3.1.24
> cdrecord: Warning: using inofficial libscg transport code version
> (okir@suse.de-scsi-linux-sg.c-1.75-resmgr-patch '@(#)scsi-linux-sg.c 1.75
> 02/10/21 Copyright 1997 J. Schilling').
> Cdrecord 2.0 (i686-suse-linux) Copyright (C) 1995-2002 Jörg Schilling
> TOC Type: 1 = CD-ROM
> Using libscg version 'schily-0.7'
> atapi: 1
> Device type : Removable CD-ROM
> Version : 0
> Response Format: 2
> Capabilities :
> Vendor_info : 'LITE-ON '
> Identifikation : 'LTR-40125S '
> Revision : 'ZS0J'
> Device seems to be: Generic mmc CD-RW.
> Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
> Driver flags : MMC-3 SWABAUDIO BURNFREE FORCESPEED
> Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
> Drive buf size : 1422080 = 1388 KB
> FIFO size : 4194304 = 4096 KB
> Track 01: data 700 MB
> Total size: 803 MB (79:39.12) = 358434 sectors
> Lout start: 804 MB (79:41/09) = 358434 sectors
> Current Secsize: 2048
> ATIP info from disk:
> Indicated writing power: 5
> Is not unrestricted
> Is not erasable
> Disk sub type: Medium Type A, high Beta category (A+) (3)
> ATIP start of lead in: -11634 (97:26/66)
> ATIP start of lead out: 359846 (79:59/71)
> Disk type: Short strategy type (Phthalocyanine or similar)
> Manuf. index: 3
> Manufacturer: CMC Magnetics Corporation
> Blocks total: 359846 Blocks current: 359846 Blocks remaining: 1412
> Forcespeed is OFF.
> Starting to write CD/DVD at speed 40 in dummy TAO mode for single session.
> Last chance to quit, starting dummy write in 1 seconds.
> 0 seconds. Operation starts.
> Waiting for reader process to fill input buffer ...
> input buffer ready.
> BURN-Free is ON.
> Turning BURN-Free off
> Burning Track 0 of 700 MB written., percent done:
> 80% : 561 of 700 MB written (fifo 98%) [buf 56%] 35.6x.
> Track 01: 562 of 700 MB written (fifo 95%) [buf 21%] 37.2x.
> Track 01: 563 of 700 MB written (fifo 100%) [buf 76%] 43.4x.
> cdrecord: Input/output error. write_g1: scsi sendcmd: cmd timeout after
> 40.115 (40) s
> CDB: 2A 00 00 04 66 89 00 00 1F 00
> cmd finished after 40.115s timeout 40s
> Sense Bytes: 70 00 0B 00 00 00 00 0A 00 00 00 00 4E 00 00 00 00 00
> write track data: error after 590628864 bytes
> Writing time: 309.900s
> Average write speed 15.4x.
> Min drive buffer fill was 12%
> Fixating...
> WARNING: Some drives don't like fixation in dummy mode.
> Fixating time: 0.002s
> cdrecord: fifo had 9367 puts and 9304 gets.
> cdrecord: fifo was 0 times empty and 3125 times full, min fill was 93%.
> Burn failed!
>
> Any ideas?
- Next message: Hawkeye: "Re: NVIDIA and 24-bit color"
- Previous message: Big Daddy: "Re: Setting SCSI emulation for ATAPE devices"
- In reply to: Maarten Rütten: "lite-on burner, suse 8.2"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Relevant Pages
|
