K3b won't burn ISO images

From: Stig Mogensen (norman_bates_at_REMOVElinuxmail.org)
Date: 01/31/04


Date: Sat, 31 Jan 2004 19:30:18 +0100

I've just downloadet the 6 ISOs, for Fedora1, for a friend.

When I try to burn them, I get the below errormessage. This only happens on
ISO images.

Any hints?

/Stig

***********copy paste begin*********
System
-----------------------
K3b Version: 0.10
KDE Version: 3.1.4
QT Version: 3.2.1

cdrecord
-----------------------
/usr/bin/cdrecord: Warning: not running as root user, fs= option ignored.
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.1.25
/usr/bin/cdrecord: Warning: using inofficial libscg transport code version
(okir@suse.de-scsi-linux-sg.c-1.75-resmgr-patch '@(#)scsi-linux-sg.c 1.75
02/10/21 Copyright 1997 J. Schilling').
SCSI buffer size: 64512
/usr/bin/cdrecord: Drive does not support SAO recording.
/usr/bin/cdrecord: Try -raw option.
/usr/bin/cdrecord: Illegal write mode for this drive.
Cdrecord-Clone 2.01a18-dvd (i686-suse-linux) Copyright (C) 1995-2003 Jörg
Schilling
Note: This version is an unofficial (modified) version with DVD support
Note: and therefore may have bugs that are not present in the original.
Note: Please send bug reports or support requests to
<warly@mandrakesoft.com>.
Note: The author of cdrecord is not to be bothered with problems in this
version.
TOC Type: 1 = CD-ROM
Using libscg version 'schily-0.7'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'ATAPI '
Identifikation : 'CD-R/RW 4X4X32 '
Revision : '3.FS'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC SWABAUDIO
Supported modes: TAO PACKET RAW/R16
Drive buf size : 1632256 = 1594 KB
FIFO size : 4194304 = 4096 KB

cdrecord comand:
-----------------------
/usr/bin/cdrecord -v gracetime=2 dev=0,0,0 speed=4 -eject -dao -data /home
stig/temp/yarrow-i386-disc1.iso
********copy paste end*************

-- 
* Registered Linux user #291266, with  http://counter.li.org.*


Relevant Pages

  • Fail to burn DVDs [was: problems with growisofs]
    ... Anyway I tried cdrecord with exactly the same syntax that you offered, ... Note: Please send bug reports or support requests to http://bugzilla.redhat.com/ ... cdrecord: Warning: using inofficial libscg transport code version. ... SCSI Bus scanning: supported ...
    (Fedora)
  • Re: cdrecord under SuSE v9.2
    ... > Running cdrecord as superuser seems to work this way, ... Please send bug reports or support requests to ... > Transport descr.: Generic transport independent SCSI ... > SCSI Bus scanning: supported ...
    (alt.os.linux.suse)
  • Freeware DVDrecord & Sony DRU-500AX fails to write DVD-R
    ... This is the OpenVMS Freeware V6.0 port of the DVDRTOOLS suite. ... support for this OpenVMS Freeware port. ... CDRECORD: Fifo not supported. ... DVD burners. ...
    (comp.os.vms)
  • FC2 - CD Drive installation or Cdrecord setup Problem
    ... CDrom and CD-RW drives read just fine. ... cdrecord: Warning: using inofficial libscg transport code version ... This version is an unofficial version with DVD support ... CUE sheet still not accepted. ...
    (Fedora)
  • Problems with CD-R
    ... cdrecord: For possible transport specifiers try 'cdrecord dev=help'. ... This version is an unofficial version with DVD support ... cdrecord: Warning: using inofficial libscg transport code version (schily ... SCSI Bus scanning: supported ...
    (Fedora)