Re: Suse 9.0 and ASUS P4P800 Deluxe...
Date: Sun, 29 Feb 2004 20:00:54 -0500
On Sunday February 29 2004 1:54 pm, David Haggett decided to vomit:
>> I'm running SuSE 9.0 with an ASUS P4P800 Deluxe.......intergrated
>> sound card was recognized and plays upon startup, playing Tux Racer,
>> etc. Haven't tried the CDrom or DVD yet.
> Until I saw the fallout from the the loser troll who's been posting here
> recently, I was going to purchase one of these motherboards to upgrade my
> own PC. Have you found any problems with the hard-disk controllers? I
> don't intend to use RAID or SATA initially, as I have two very useful
> ATA100 drives with much free space.
Wait until SuSE 9.1, or 10, or whatever it is for full support for SATA in
the 2.6.x kernel. It should definitely support the ICH5 SATA, but I doubt
the ICH5R software RAID. Via VT6410 support might be there as well. That
should fill your bill.
- Serial ATA (SATA) on Linux status report
... Serial ATA (SATA) for Linux ... Hardware does not support hotplug. ... drivers/ide driver status: Production, but see issue #1, #2. ... full SATA control including hotplug ...
- RE: W2K3 Clustering 2 nodes -- 2 questions
... I have not heard of anyone doing this with SATA, however it may work for testing purposes. ... This message is provided as is and does not imply any warranty or gaurantee of support of any kind. ... If you just want to build a personal cluster to ... |>quorum device will actually be on the node's local HDD ...
- Serial ATA (SATA) status report
... non-standard SATA port controls. ... Hardware does not support hotplug. ... full SATA control including hotplug ... libata driver status: Alpha. ...
- Re: Updated SATA support patches for Intel ICH & Promise cards
... |> This is only HW support and does not address other ata/FreeBSD issues. ... | I havn't looked into hotswapping SATA much yet, ... SATA drives since you have to read the registers and do reset etc. ... this especially for things like Intel when they just expose the SATA ...
- [PATCH v2] ata: add CONFIG_SATA_HOST config option
... Add CONFIG_SATA_HOST config option (for selecting SATA Host ... support) to make setup easier on PATA-only systems. ... +endif # SATA_HOST ...