Re: xine and kaffeine jumping
From: Carl (carl.s_at_clear.net.nz)
Date: 05/24/04
- Next message: Leon Strider: "Re: SuSE 9.1 - Sony Clie NX80V/U"
- Previous message: C Roth: "Re: Gnome unusable with Suse 9.1"
- In reply to: Carl Sanderson: "xine and kaffeine jumping"
- Next in thread: John: "Re: xine and kaffeine jumping"
- Reply: John: "Re: xine and kaffeine jumping"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Date: Mon, 24 May 2004 22:36:58 +1200
Carl Sanderson wrote:
> Hi all,
> I have managed to get xine and kaffeine to play regulr movie type DVDs
> with mixed resulte.
>
> 1. The playback is jerky. that is it plays for about 5-6 seconds then
> pauses and then continues (buffering?)
>
> 2. One user has audio and another does not (home install and 3 users). I
> copied the .xine/config and .kaffeine/config files form the user that does
> have audio to that which does not and there is no change.
>
> Could anyone offer any help on these.
>
> here is my .xine/config file (sorry about the length);
>
> #
> # xine config file
> #
> .version:1
>
> # Entries which are still set to their default values are commented out.
> # Remove the '#' at the beginning of the line, if you want to change them.
>
> # Enable deinterlacing by default
> # bool, default: 0
> gui.deinterlace_by_default:1
>
> # Configuration experience level
> # { Beginner Advanced Expert Master of the known universe }, default: 0
> gui.experience_level:Master of the known universe
>
> # Enable OSD support
> # bool, default: 1
> #gui.osd_enabled:1
>
> # Dismiss OSD time (s)
> # numeric, default: 3
> #gui.osd_timeout:3
>
> # Ask user for playback with unsupported codec
> # bool, default: 0
> #gui.play_anyway:0
>
> # Automatically reload old playlist
> # bool, default: 0
> #gui.playlist_auto_reload:0
>
> # Audio visualization plugin
> # { fftgraph fftscope oscope goom }, default: 0
> #gui.post_audio_plugin:fftgraph
>
> # gui skin theme
> # { xinetic }, default: 0
> #gui.skin:xinetic
>
> # Change xine's behavior for unexperienced user
> # bool, default: 1
> #gui.smart_mode:1
>
> # Snapshot location
> # string, default: /home/carl
> gui.snapshotdir:/home/carl/imgaes
>
> # Display splash screen
> # bool, default: 1
> gui.splash:0
>
> # Subtitle autoloading
> # bool, default: 1
> #gui.subtitle_autoload:1
>
> # Visual animation style
> # { None Post Plugin Stream Animation }, default: 1
> #gui.visual_anim:Post Plugin
>
> # Windows stacking (more)
> # bool, default: 0
> #gui.always_layer_above:0
>
> # Audio mixer control method
> # { Sound card Software }, default: 0
> #gui.audio_mixer_method:Sound card
>
> # Visiblility behavior of panel
> # bool, default: 0
> #gui.auto_panel_visibility:0
>
> # Visibility behavior of output window
> # bool, default: 0
> #gui.auto_video_output_visibility:0
>
> # Deinterlace plugin.
> # string, default:
>
tvtime:method=LinearBlend,cheap_mode=1,pulldown=0,use_progressive_frame_flag=1
>
#gui.deinterlace_plugin:tvtime:method=LinearBlend,cheap_mode=1,pulldown=0,use_progressive_frame_flag=1
>
> # Event sender behavior
> # bool, default: 1
> #gui.eventer_sticky:1
>
> # Windows stacking
> # bool, default: 0
> #gui.layer_above:0
>
> # Use unscaled OSD
> # bool, default: 1
> #gui.osd_use_unscaled:1
>
> # Screensaver wakeup
> # numeric, default: 10
> #gui.screensaver_timeout:10
>
> # Menu shortcut style
> # { Windows style Emacs style }, default: 0
> #gui.shortcut_style:Windows style
>
> # Stream information
> # bool, default: 0
> #gui.sinfo_auto_update:0
>
> # Skin Server Url
> # string, default: http://xine.sourceforge.net/skins/skins.slx
> #gui.skin_server_url:http://xine.sourceforge.net/skins/skins.slx
>
> # Chapter hopping
> # bool, default: 1
> #gui.skip_by_chapter:1
>
> # New stream sizes resize output window
> # bool, default: 1
> #gui.stream_resize_window:1
>
> # tips timeout (ms)
> # numeric, default: 500
> #gui.tips_timeout:500
>
> # gui tips visibility
> # bool, default: 1
> #gui.tips_visible:1
>
> # Name of video display
> # string, default:
> #gui.video_display:
>
> # Synchronized X protocol (debug)
> # bool, default: 0
> #gui.xsynchronize:0
>
> # Double size for small streams (require stream_resize_window)
> # bool, default: 0
> #gui.zoom_small_stream:0
>
> # Logo mrl
> # string, default: file:/usr/share/xine/skins/xine-ui_logo.mpv
> #gui.logo_mrl:file:/usr/share/xine/skins/xine-ui_logo.mpv
>
> # use XVidModeExtension when switching to fullscreen
> # bool, default: 0
> #gui.use_xvidext:0
>
> # Amplification level
> # [0..200], default: 100
> #gui.amp_level:100
>
> # gui panel visibility
> # bool, default: 1
> #gui.panel_visible:1
>
> # numeric, default: 200
> gui.panel_x:4
>
> # numeric, default: 100
> gui.panel_y:603
>
> # brightness value
> # [0..65535], default: 29097
> #gui.vo_brightness:29097
>
> # saturation value
> # [0..65535], default: 34176
> #gui.vo_saturation:34176
>
> # device used for 5.1-channel output
> # string, default: iec958:AES0=0x6,AES1=0x82,AES2=0x0,AES3=0x2
> #audio.alsa_a52_device:iec958:AES0=0x6,AES1=0x82,AES2=0x0,AES3=0x2
>
> # device used for mono output
> # string, default: default
> #audio.alsa_default_device:default
>
> # device used for stereo output
> # string, default: front
> #audio.alsa_front_device:front
>
> # sound card can do mmap
> # bool, default: 0
> #audio.alsa_mmap_enable:0
>
> # device used for 4-channel output
> # string, default: surround40
> #audio.alsa_surround40_device:surround40
>
> # device used for 5.1-channel output
> # string, default: surround51
> #audio.alsa_surround51_device:surround51
>
> # audio driver to use
> # { auto null alsa oss esd file none }, default: 0
> #audio.driver:auto
>
> # startup audio volume
> # [0..100], default: 50
> #audio.mixer_volume:50
>
> # OSS audio device name
> # { auto /dev/dsp /dev/sound/dsp }, default: 0
> #audio.oss_device_name:auto
>
> # OSS audio device number, -1 for none
> # numeric, default: -1
> #audio.oss_device_number:-1
>
> # offset for digital passthrough
> # numeric, default: 0
> #audio.passthrough_offset:0
>
> # restore volume level at startup
> # bool, default: 0
> #audio.remember_volume:0
>
> # method to sync audio and video
> # { metronom feedback resample }, default: 0
> #audio.av_sync_method:metronom feedback
>
> # always resample to this rate (0 to disable)
> # numeric, default: 0
> #audio.force_rate:0
>
> # number of audio buffers
> # numeric, default: 230
> #audio.num_buffers:230
>
> # enable resampling
> # { auto off on }, default: 0
> #audio.resample_mode:auto
>
> # deinterlace method
> # { none bob weave greedy onefield onefield_xv linearblend },
> # { default:
> 4
> #video.deinterlace_method:onefield
>
> # video driver to use
> # { auto aadxr3 dxr3 xv xshm none opengl vidixfb vidix fb },
> default: 0
> #video.driver:auto
>
> # horizontal image position in the output window
> # [0..100], default: 50
> #video.horizontal_position:50
>
> # vertical image position in the output window
> # [0..100], default: 50
> #video.vertical_position:50
>
> # pitch alignment workaround
> # bool, default: 0
> #video.xv_pitch_alignment:0
>
> # enable double buffering
> # bool, default: 1
> #video.XV_DOUBLE_BUFFER:1
>
> # number of video buffers
> # numeric, default: 500
> #video.num_buffers:500
>
> # percentage of discarded frames to tolerate
> # numeric, default: 10
> #video.warn_discarded_threshold:10
>
> # percentage of skipped frames to tolerate
> # numeric, default: 10
> #video.warn_skipped_threshold:10
>
> # autopaint colour key
> # bool, default: 0
> #video.xv_autopaint_colorkey:0
>
> # video overlay colour key
> # [0..16777215], default: 197121
> #video.xv_colorkey:197121
>
> # DXR3 device number
> # numeric, default: 0
> #dxr3.device_number:0
>
> # swap odd and even lines
> # bool, default: 0
> #dxr3.enc_swap_fields:0
>
> # add black bars to correct aspect ratio
> # bool, default: 1
> #dxr3.enc_add_bars:1
>
> # use smooth play mode for mpeg encoder playback
> # bool, default: 1
> #dxr3.enc_alt_play_mode:1
>
> # default language for DVD playback
> # string, default: en
> #input.dvd_language:en
>
> # region the DVD player claims to be in (1 to 8)
> # numeric, default: 1
> #input.dvd_region:1
>
> # file browsing start location
> # string, default: /home/carl/.xine
> #input.file_origin_path:/home/carl/.xine
>
> # network bandwidth
> # { 14.4 Kbps (Modem) 19.2 Kbps (Modem) 28.8 Kbps (Modem) 33.6 Kbps
> (Modem) 34.4 Kbps (Modem) 57.6 Kbps (Modem) 115.2 Kbps (ISDN) 262.2
> Kbps (Cable/DSL) 393.2 Kbps (Cable/DSL) 524.3 Kbps (Cable/DSL) 1.5 Mbps
> (T1) 10.5 Mbps (LAN) }, default: 10
> #input.mms_network_bandwidth:1.5 Mbps (T1)
>
> # device used for CD audio
> # string, default: /dev/cdrom
> #input.cdda_device:/dev/cdrom
>
> # query CDDB
> # bool, default: 1
> #input.cdda_use_cddb:1
>
> # device used for DVD playback
> # string, default: /dev/dvd
> #input.dvd_device:/dev/dvd
>
> # raw device set up for DVD access
> # string, default: /dev/rdvd
> #input.dvd_raw_device:/dev/rdvd
>
> # read-ahead caching
> # bool, default: 1
> input.dvd_use_readahead:0
>
> # list hidden files
> # bool, default: 0
> #input.file_hidden_files:0
>
> # Domains, where to ignore the HTTP proxy
> # string, default:
> #input.http_no_proxy:
>
> # HTTP proxy host
> # string, default:
> #input.http_proxy_host:
>
> # HTTP proxy password
> # string, default:
> #input.http_proxy_password:
>
> # HTTP proxy port
> # numeric, default: 80
> #input.http_proxy_port:80
>
> # HTTP proxy username
> # string, default:
> #input.http_proxy_user:
>
> # device used for WinTV-PVR 250/350 (pvr plugin)
> # string, default: /dev/video0
> #input.pvr_device:/dev/video0
>
> # v4l radio device
> # string, default: /dev/v4l/radio0
> #input.v4l_radio_device_path:/dev/v4l/radio0
>
> # v4l video device
> # string, default: /dev/v4l/video0
> #input.v4l_video_device_path:/dev/v4l/video0
>
> # device used for VCD playback
> # string, default: /dev/cdrom
> #input.vcd_device:/dev/cdrom
>
> # CSS decryption method
> # { key disc title }, default: 0
> #input.css_decryption_method:key
>
> # unit for seeking
> # { seek in program chain seek in program }, default: 0
> #input.dvd_seek_behaviour:seek in program chain
>
> # unit for the skip action
> # { skip program skip part skip title }, default: 0
> #input.dvd_skip_behaviour:skip program
>
> # MMS protocol
> # { auto TCP HTTP }, default: 0
> #input.mms_protocol:auto
>
> # CDDB cache directory
> # string, default: /home/carl/.xine/cddbcache
> #input.cdda_cddb_cachedir:/home/carl/.xine/cddbcache
>
> # CDDB server port
> # numeric, default: 8880
> #input.cdda_cddb_port:8880
>
> # CDDB server name
> # string, default: freedb.freedb.org
> #input.cdda_cddb_server:freedb.freedb.org
>
> # path to the title key cache
> # string, default: /home/carl/.dvdcss/
> #input.css_cache_path:/home/carl/.dvdcss/
>
> # use A/52 dynamic range compression
> # bool, default: 0
> #codec.a52_dynrng:0
>
> # downmix audio to 2 channel surround stereo
> # bool, default: 0
> #codec.a52_surround_downmix:0
>
> # A/52 volume
> # [0..200], default: 100
> #codec.a52_level:100
>
> # MPEG-4 postprocessing quality
> # [0..6], default: 3
> #codec.ffmpeg_pp_quality:3
>
> # path to RealPlayer codecs
> # string, default: unknown
> codec.real_codecs_path:/usr/lib/RealPlayer8/Codecs
>
> # path to Win32 codecs
> # string, default: /usr/lib/win32
> #codec.win32_path:/usr/lib/win32
>
> # frames per second to generate
> # numeric, default: 10
> #post.goom_fps:10
>
> # goom image height
> # numeric, default: 240
> #post.goom_height:240
>
> # goom image width
> # numeric, default: 320
> #post.goom_width:320
>
> # colorspace conversion method
> # { Fast but not photorealistic Slow but looks better }, default: 0
> #post.goom_csc_method:Fast but not photorealistic
>
> # |Ê=@
> # numeric, default: 0
> #decoder.a/52_priority:0
>
> # |Ê=@
> # numeric, default: 0
> #decoder.bitplane_priority:0
>
> # |Ê=@
> # numeric, default: 0
> #decoder.dts_priority:0
>
> # |Ê=@
> # numeric, default: 0
> #decoder.dvaudio_priority:0
>
> # |Ê=@
> # numeric, default: 0
> #decoder.dxr3-mpeg2_priority:0
>
> # |Ê=@
> # numeric, default: 0
> #decoder.dxr3-spudec_priority:0
>
> # |Ê=@
> # numeric, default: 0
> #decoder.faad_priority:0
>
> # |Ê=@
> # numeric, default: 0
> #decoder.ffmpeg-wmv8_priority:0
>
> # |Ê=@
> # numeric, default: 0
> #decoder.ffmpegaudio_priority:0
>
> # |Ê=@
> # numeric, default: 0
> #decoder.ffmpegvideo_priority:0
>
> # |Ê=@
> # numeric, default: 0
> #decoder.gsm610_priority:0
>
> # |Ê=@
> # numeric, default: 0
> #decoder.image_priority:0
>
> # |Ê=@
> # numeric, default: 0
> #decoder.mad_priority:0
>
> # |Ê=@
> # numeric, default: 0
> #decoder.mpeg2_priority:0
>
> # |Ê=@
> # numeric, default: 0
> #decoder.nsf_priority:0
>
> # |Ê=@
> # numeric, default: 0
> #decoder.pcm_priority:0
>
> # |Ê=@
> # numeric, default: 0
> #decoder.qta_priority:0
>
> # |Ê=@
> # numeric, default: 0
> #decoder.qtv_priority:0
>
> # |Ê=@
> # numeric, default: 0
> #decoder.real_priority:0
>
> # |Ê=@
> # numeric, default: 0
> #decoder.realadec_priority:0
>
> # |Ê=@
> # numeric, default: 0
> #decoder.rgb_priority:0
>
> # |Ê=@
> # numeric, default: 0
> #decoder.spucc_priority:0
>
> # |Ê=@
> # numeric, default: 0
> #decoder.spudec_priority:0
>
> # |Ê=@
> # numeric, default: 0
> #decoder.sputext_priority:0
>
> # |Ê=@
> # numeric, default: 0
> #decoder.vorbis_priority:0
>
> # |Ê=@
> # numeric, default: 0
> #decoder.win32a_priority:0
>
> # |Ê=@
> # numeric, default: 0
> #decoder.win32v_priority:0
>
> # |Ê=@
> # numeric, default: 0
> #decoder.yuv_priority:0
>
> # subtitle size
> # { tiny small normal large very large huge }, default: 1
> #misc.spu_subtitle_size:small
>
> # subtitle vertical offset
> # numeric, default: 0
> #misc.spu_vertical_offset:0
>
> # palette (foreground-border-background) to use for subtitles and OSD
> # { white-black-transparent white-none-transparent white-none-translucid
> yellow-black-transparent }, default: 0
> #misc.osd_text_palette:white-black-transparent
>
> # font for subtitles
> # string, default: sans
> #misc.spu_font:sans
>
> # encoding of the subtitles
> # string, default: iso-8859-1
> #misc.spu_src_encoding:iso-8859-1
>
> # use unscaled OSD if possible
> # bool, default: 1
> #misc.spu_use_unscaled_osd:1
>
> # media format detection strategy
> # { default reverse content extension }, default: 0
> #misc.demux_strategy:default
>
> # memcopy method used by xine
> # { probe glibc kernel mmx mmxext sse }, default: 0
> misc.memcpy_method:mmxext
>
> # default duration of subtitle display in seconds
> # numeric, default: 4
> #misc.sub_timeout:4
>
> # allow implicit changes to the configuration (e.g. by MRL)
> # bool, default: 0
> #misc.implicit_config:0
>
> # directory for saving streams
> # string, default:
> #misc.save_dir:
>
> # automatically advance track/entry
> # bool, default: 1
> #vcd.autoadvance:1
>
> # default type to use on VCD autoplay
> # { track entry segment playlist }, default: 3
> #vcd.autoplay:playlist
>
> # position slider range
> # { auto track entry }, default: 0
> #vcd.length_reporting:auto
>
> # show 'rejected' LIDs
> # bool, default: 0
> #vcd.show_rejected:0
>
> # format string for stream comment field
> # string, default: %P - Track %T
> #vcd.comment_format:%P - Track %T
>
> # debug flag mask
> # numeric, default: 0
> #vcd.debug:0
>
> # default CD drive used for VCD when none given
> # string, default:
> #vcd.default_device:
>
> # format string for display banner
> # string, default: %F - %I %N%L%S, disk %c of %C - %v %A
> #vcd.title_format:%F - %I %N%L%S, disk %c of %C - %v %A
>
>
> tia
>
> Carl
Thanks all for your help.
Yes DMA seems to have been the problem with the jerky data. It was off. I
turned it on and now all is well.
As to the sound. I did it the long way. I removed the user and then
recreated the user.
Now on to my Grip errors . . .
Thanks all
- Next message: Leon Strider: "Re: SuSE 9.1 - Sony Clie NX80V/U"
- Previous message: C Roth: "Re: Gnome unusable with Suse 9.1"
- In reply to: Carl Sanderson: "xine and kaffeine jumping"
- Next in thread: John: "Re: xine and kaffeine jumping"
- Reply: John: "Re: xine and kaffeine jumping"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Relevant Pages
|
