Re: Zip Drive Plus

From: Rob (michelis1101_at_yahoo.com)
Date: 02/19/05 

Date: Sat, 19 Feb 2005 03:12:38 GMT

Rob wrote:

> Hello,
>
> I have an old iomega zip drive plus that I would like to use on my linux
> machine. I am running suse 9.2 and can get the drive to work with the IMM
> module after the system boots. Everything I have tried to get the drive
> to
> start automatically at boot has failed. Does anyone have any insight into
> enabling the drive at boot? I apologize if this topic has been covered
> previously, but I did not notice it in the archives.
>
> Thanks for any help -
> Rob

I should have mentioned that the drive is connected to the parellel port.
Sorry about that!!

- Rob

Relevant Pages

  • Re: LSH source code, SB-180 disk data recovery
    ... Kim expressed an interest in getting the source code to Rob Friefeld's ... the code but his SB-180 (on whose hard disk it sits) won't start up. ... worse than a bad boot floppy. ... I can see a dead PS as it should annouce itself on power up. ...
    (comp.os.cpm)
  • Re: Boot failure after power failure
    ... probably time for a Repair Installation. ... "Rob" wrote in message ... > No matter what menu pick I choose (Boot Normally, ... No matter what I try I ...
    (microsoft.public.windowsxp.general)
  • Re: Zip Drive Plus
    ... Rob wrote: ... I am running suse 9.2 and can get the drive to work with the ... > start automatically at boot has failed. ...
    (alt.os.linux.suse)
  • Re: Disksuite Volme Manager
    ... Rob, I would appreciate if you can provide an docs for the following. ... >> recover (on reboot) from a primary drive failure? ... >> the secondary mirror? ... > mirror to fail and still boot. ...
    (comp.unix.solaris)
  • Re: Possible to have more than 1 SCSI Controller in a PC?
    ... >>> As a matter of fact, you can't even boot off a tape drive. ... Prev by Date: ...
    (comp.periphs.scsi)