Re: so I decided to remove SUSE 9.2 from my machine

From: Michael Soibelman (soibelman_at_sbcglobal.net)
Date: 05/18/05


Date: Wed, 18 May 2005 20:32:05 GMT

Michael Soibelman wrote:

> GOAT wrote:
>
>> I installed SUSE 9.2 after trying out Ubuntu and not really liking it
>> too much...I was never able to play DVD's,get my network running and
>> worse FIREFOX never acted properly. I want to go back to windows :(
>> In order to do this I poped in my XP cd and alsa I was not able to get

>
> 6. This should reboot your box and the BIOS changes should cause your box
> to seek the Floppy as the boot device !!
>
> If that works AND IF you correctly made a BOOTABLE floppy with Windows
> system files on it you will, after a few moments while the floppy detects
> your hardware, be at a C: prompt. If so change to an A: prompt by typing
> A: This will put you on the floppy drive where you simply type FDISK /
> MBR. Now you'll be asked to confirm that you really want to do this. Say
> yES. That will remove your old Master Boot Record.
>
> 7. Now reboot and enter the BIOS as above and change your First Boot
> Device back to where it was, save change and reboot to your CD.
>
> Your exact instructions may vary as I stated, as all BIOS menus are not
> identical. However, this should get you there. Usually, your BIOS menu
> will have the directions on how to chane your settings at the bottom of
> the
> menu ! Follow its' directions as they will be correct for your BIOS !!
>
> Good luck and sorry to hear you didn't like SuSE 9.2 :~) Perhaps you
> might
> tell us why ?? Good luck anyway....

By the way, if you don't know how to change BIOS settings, you 'probably'
don't know how to create a Windows bootable floppy disk either!! Make
absolutely sure you get that right or you'll get an error message upon
attempting to boot to floppy...If so, come back and I'll tell you how !!
You CAN NOT simply copy files to the floppy !! You must do this in the
proper way or you will fail !! It must contain the Windows system files
necessary to boot your system !!! Be careful !!



Relevant Pages

  • Re: program to map out weak HD sectors?
    ... >>> I don't have a floppy drive or bootable CDROM. ... Bios Date is 1998. ... can't boot from it. ...
    (comp.sys.ibm.pc.hardware.storage)
  • Re: Cpq Presario 906
    ... which comes w/o the internal FDD. ... also has the 26-pin flexprint floppy connector on the mobo, ... properly detected during POST and the BIOS briefly scans the ... floppy in it BUT is too stupid to actually boot from it! ...
    (comp.sys.laptops)
  • Re: Cpq Presario 906
    ... which comes w/o the internal FDD. ... also has the 26-pin flexprint floppy connector on the mobo, ... properly detected during POST and the BIOS briefly scans the ... floppy in it BUT is too stupid to actually boot from it! ...
    (comp.sys.laptops)
  • Re: FC4 and Assembly Language Program
    ... i am about to make a bootable floppy for test ... #objcopy -O binary myos.o BOOT ... Does the BIOS actually contain the software interrupt code you are ...
    (Fedora)
  • Re: unable to create file hal.dll
    ... By creating a boot floppy with those files, you are still relying on the ... system files to load the machine. ... Windows help - www.rickrogers.org ...
    (microsoft.public.windowsxp.general)