Re: Linksys PSUS4 Printserver

From: Freek (f_dekruijf_at_hotmail.com)
Date: 06/03/05 

Date: Fri, 03 Jun 2005 14:46:43 +0200

Slottech wrote:

>
> TCP/IP Info:
> IP Address: 192.168.0.0

This is wrong. The last zero must be a number from 1 till 254 inclusive. 0
and 255 are excluded because these are broadcast addresses with the Subnet
Mask given below.

> Subnet Mask: 255.255.255.0
> Gateway Address: 192.168.0.0

The gateway address is also wrong. It should be the address of the router in
this subnet, also the last 0 should be a number from 1-254 inclusive.

> Email Server IP Address: 0.0.0.0
> Printing Account Name: N/A
> Redirect Account Name: N/A

Relevant Pages

  • Re: PPTP Site-to-Site VPN problem
    ... My understanding has always been that if you route between 2 or more different subnets then there has to be a gateway defined. ... If routing on a single subnet then no gateway needs to be defined. ... the RRAS service on the servers. ...
    (microsoft.public.windows.server.networking)
  • Re: RRAS server separating two subnets - one subnet cannot reach the Internet and computers cant
    ... I have a small lab with a bunch of servers setup on two different subnets, 192.168.1.1 is the gateway for one and 172.16.1.1 is the gateway for the other. ... The RRAS server can reach the Internet as well as the computers in the 192.168.1.0/24 subnet. ... You will need to add some extra routing to your gateway router to get it running. ...
    (microsoft.public.windows.server.networking)
  • Re: DHCP clients; where does the preffered routes come from?
    ... The gateway to get to the 192.168.1.x subnet from 192.168.2x subnet is ... to be access by the DHCP clients on 192.168.1.x subnet and those computer ... This router will deliver the packet to ...
    (microsoft.public.windows.server.networking)
  • Re: public/private IPs and subnet masks
    ... and gateway 132.132.132.254 ... You want to setup your new network printer with a private IP. ... I wonder if it matters which subnet gateway the printer should get ...
    (microsoft.public.windowsxp.network_web)
  • Re: can an alias address be routed through?
    ... The other interface sis0 has an address of 192.169.1.254 with a subnet ... BUT from the 192.169 network It still doesnt ... If i add a route ... In other words, no matter what your netmask, your gateway ...
    (comp.unix.bsd.openbsd.misc)