Re: Samsung CLP-510 color laser printer on Suse

From: Tom Goodman (tovmas_at_hotmail.com)
Date: 07/24/05


Date: Sun, 24 Jul 2005 09:31:45 +0100

ray wrote:
> Have you tried just starting over - eliminate the Samsung driver, and try
> with only the upgraded CUPS software. I have seen instances where the
> manufacturer's software did not work, but a recent CUPS install worked
> fine.
>
If it's any help: I bought a Samsung CLP 500 (similar machine) fom PC
World for a client running a Linux network-Red Hat and another for our
office when we found out what a good value printer it was. The box
stated that it was Linux compatible-but no drivers included, only those
for Microsnot Windoze.

Searching on Samsung's web site eventually produced the necessary
drivers. Using SuSe Pro 9.2 it was easy to get the printer working using
the parallel port. The Samsung software partially replaces some of the
CUPS elements and adds shortcuts for configuration and administration.
These worked well.

The printer on Red Hat 9 was attached to a linux server via ethernet and
was installed using a script written by a colleague. It eventually
worked well after my very able colleague had ponderd the correct
installation method, which included deleting and re-installing CUPS with
appropriate amendments for this printer.

I think the Linux Printing newsgroup described it as a paperweight
because it did not print straight out of the box-but various people
wrote in to say that they had it workiing well.

SuSe 9.3 seems to be well supplied with drivers and i exect it will
recognise the Samsung CPL510 in which case a YAST installation should go
through with no trouble.

YAST now understands an ancient Turtle Beach soundcard found in a
skipped computer- whereas 0.2 did not want to know it.

Things are improving.



Relevant Pages

  • Re: Why everyone complains?
    ... >> have seen alot of folk complaining about Linux. ... and I noticed someone complaining about sluggishness. ... > installation is not as easy as in MS', but you don't have to install ... if all the included drivers built in kernel are compiled and ...
    (alt.linux)
  • getting a Samsung ML2510 laser printer working on an Etch RC1 i386 box...
    ... I chose the Samsung because it seems to be Linux friendly and it prints relatively quickly. ... You actually get a CD with it which contains Linux drivers and some kind of linux installation routine that I fiddled a little bit with but did not seem to work too well. ... However if you ignore it and go into the Etch printer configuration tool then it helps you choose the right driver for the printer - it tells you that if you use the drivers from the CD that Samsung give you that this is not a good idea because they don't work with all Linux distributions and so it is better to use the drivers recommended by Etch or footmatic or gutenprint or whoever it is that is recommending them. ...
    (Debian-User)
  • Linux Driver Installation not so bad...
    ... along the lines of Linux needing to simplify their driver installation ... various motherboard drivers, everything was almost working. ... If you have a problem it is far easier to get reliable info on a ...
    (alt.os.linux)
  • Re: Processor excursions
    ... USB, which I've also never done before. ... The drivers, for some reason I have no intention of understanding if I can avoid ... to the FMs, it'll be created in the driver installation process, and, at worst, ... Linux system, it can be extracted from this using a program called "unshield" ...
    (uk.rec.sheds)
  • Re: Are there motherboards Linux cant use?
    ... >> The most common reason is that their version of Linux doesn't have ... >> drivers for necessary hardware. ... > installation process, ... as long as the boot floppy supports your CPU ...
    (comp.os.linux.hardware)

Loading