DVD Burn under k3b
- From: ghs <sos@xxxxxxxxxxx>
- Date: Tue, 28 Feb 2006 18:14:02 GMT
Greetings:
I'm running Suse 10.0 and cannot burn data DVD's (or Cd's).
with a Plextor 716A burner. The burner works (I burned the
Suse 10.0 iso under 9.1) but not under 10.0. The burner
spins up for about 60 seconds, then seems to hang while
writing track 1 of 1. I have attached the log file in hope that
someone can shed a little light on my problem.
Thanks
System
-----------------------
K3b Version: 0.12.11
KDE Version: 3.4.2 Level "b"
QT Version: 3.3.4
Kernel: 2.6.13-15.8-default
Devices
-----------------------
PLEXTOR DVDR PX-716A 1.03 (/dev/hda, ) at /media/dvdrecorder [CD-R; CD-RW;
CD-ROM; DVD-ROM; DVD-R; DVD-RW; DVD+R; DVD+RW; DVD+R DL] [DVD-ROM; DVD-R
Sequential; DVD-RW Restricted Overwrite; DVD-RW Sequential; DVD+RW; DVD+R;
DVD+R Double Layer; CD-ROM; CD-R; CD-RW] [SAO; TAO; RAW; SAO/R96P;
SAO/R96R; RAW/R16; RAW/R96P; RAW/R96R; Restricted Overwrite]
UNKNOWN DVD-ROM 1.20 (/dev/hdb, ) at /media/dvd [CD-ROM; DVD-ROM] [DVD-ROM;
CD-ROM] [None]
K3b
-----------------------
Size of filesystem calculated: 33479
Used versions
-----------------------
cdrecord: 2.1
cdrecord
-----------------------
/usr/bin/cdrecord: Operation not permitted. WARNING: Cannot set RR-scheduler
/usr/bin/cdrecord: Permission denied. WARNING: Cannot set priority using
setpriority().
/usr/bin/cdrecord: WARNING: This causes a high risk for buffer underruns.
/usr/bin/cdrecord: Warning: not running as root user, fs= option ignored.
scsidev: '/dev/hda'
devname: '/dev/hda'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Linux sg driver version: 3.5.27
/usr/bin/cdrecord: Warning: using inofficial libscg transport code version
(okir@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx '@(#)scsi-linux-sg.c 1.83
04/05/20 Copyright 1997 J. Schilling').
SCSI buffer size: 64512
/usr/bin/cdrecord: This version of cdrecord does not include DVD-R/DVD-RW
support code.
/usr/bin/cdrecord: If you need DVD-R/DVD-RW support, ask the Author for
cdrecord-ProDVD.
/usr/bin/cdrecord: Free test versions and free keys for personal use are at
ftp://ftp.berlios.de/pub/cdrecord/ProDVD/
Cdrecord-Clone 2.01 (i686-suse-linux) Copyright (C) 1995-2004 Jörg
Schilling
Note: This version is an unofficial (modified) version
Note: and therefore may have bugs that are not present in the original.
Note: Please send bug reports or support requests to
http://www.suse.de/feedback
Note: The author of cdrecord should not be bothered with problems in this
version.
TOC Type: 3 = CD-ROM XA mode 2
Using libscg version 'schily-0.8'.
Driveropts: 'burnfree'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'PLEXTOR '
Identifikation : 'DVDR PX-716A '
Revision : '1.03'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0009
Profile: 0x002B
Profile: 0x001B
Profile: 0x001A
Profile: 0x0014
Profile: 0x0013
Profile: 0x0011
Profile: 0x0010
Profile: 0x000A
Profile: 0x0009 (current)
Profile: 0x0008
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 4802784 = 4690 KB
Drive DMA Speed: 8135 kB/s 46x CD 5x DVD
FIFO size : 4194304 = 4096 KB
/usr/bin/cdrecord: DMA speed too slow (OK for 37x). Cannot write at speed
48x.
Track 01: data 65 MB
Total size: 75 MB (07:26.41) = 33481 sectors
Lout start: 75 MB (07:28/31) = 33481 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 4
Is not unrestricted
Is not erasable
Disk sub type: Medium Type A, high Beta category (A+) (3)
ATIP start of lead in: -11079 (97:34/21)
ATIP start of lead out: 359849 (79:59/74)
Disk type: Long strategy type (Cyanine, AZO or similar)
Manuf. index: 11
Manufacturer: Mitsubishi Chemical Corporation
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 326368
Starting to write CD/DVD at speed 48 in real TAO mode for multi session.
Last chance to quit, starting real write in 2 seconds.
1 seconds.
0 seconds.
Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is OFF.
Turning BURN-Free on
Performing OPC...
Starting new track at sector: 0
Track 01: 0 of 65 MB written.
cdrecord command:
-----------------------
/usr/bin/cdrecord -v gracetime=2 dev=/dev/hda speed=48 -tao
driveropts=burnfree -eject -multi -xa -tsize=33479s -
mkisofs
-----------------------
33479
INFO: UTF-8 character encoding detected by locale settings.
Assuming UTF-8 encoded filenames on source filesystem,
use -input-charset to override.
1.53% done, estimate finish Thu Feb 23 15:39:09 2006
3.01% done, estimate finish Thu Feb 23 15:38:37 2006
4.49% done, estimate finish Thu Feb 23 15:38:26 2006
mkisofs command:
-----------------------
/usr/bin/mkisofs -gui -graft-points -volid w2ksp4 -volset -appid K3B THE CD
KREATOR (C) 1998-2005 SEBASTIAN TRUEG AND THE K3B TEAM -publisher
-preparer -sysid LINUX -volset-size 1 -volset-seqno 1
-sort /tmp/kde-gerald/k3bVrxM8b.tmp -rational-rock
-hide-list /tmp/kde-gerald/k3bTpxQlc.tmp -joliet -joliet-long
-hide-joliet-list /tmp/kde-gerald/k3bbVO91a.tmp -full-iso9660-filenames
-iso-level 2 -path-list /tmp/kde-gerald/k3bkGa2Zb.tmp
--
G. Seibert
sos at eastlink dot ca
.
- Follow-Ups:
- Re: DVD Burn under k3b -- a few things to look at --
- From: AnonymousFC4
- Re: DVD Burn under k3b -- a few things to look at --
- Prev by Date: How can I set a network card to active....
- Next by Date: Re: How can I set a network card to active....
- Previous by thread: How can I set a network card to active....
- Next by thread: Re: DVD Burn under k3b -- a few things to look at --
- Index(es):
Relevant Pages
|
