Re: Need Software RAID Help

Theo v. Werkhoven wrote:
The carbonbased lifeform Thomas Tootle inspired alt.os.linux.suse with:
Greetings,
I've been googling and read the administrator's guide to software RAID but I'm still having problems getting it to work. I'm using two 80 Gb WD hard drives on IDE connections, Epox EP-8RDA mobo, Athlon XP 3000, with a gig of RAM. I first installed SUSE 10.0 then attempted to add the second hard drive as a mirror or RAID 1. Couldn't figure that out. So I tried a fresh install and during the partition section went to RAID tab to attempt to set up RAID 1 then. It told me to change the partition's to RAID which I couldn't do as the hard drives were already partitioned. So I deleted the suggested partitions and then switched them to no format RAID partitions. When I went to go to the next step I was informed that I didn't have a swap partition. I'm not that well versed in partitions and RAID 1 installing (obviously) and previously used the suggested partitions which worked fine. But I want to use this as a SMB server and protect vital data thus mirroring. I need a root, swap, boot and user partitions (I think) and want them to be duplicated on the second hard drive. Any suggestions?

Delete all existing partitions.
In the Expert option first make swap partitions on both drives, of say
512MB each.
Then use the rest of both drives to make partitions of type 'fd' (Linux
raid auto). Tell YaST to use these partitions for a RAID1 configuration
and to mount '/' on this new drive /dev/md0.
Make your fav. filssystem on the RAID. The two swap partitions will be
recognized and used automagically.

The rest should speak for itself iirc.

Theo
Thanks, Theo,

I'll give this a try as soon as I get home to that box. I appreciate your time.

Tom
.

Relevant Pages

  • Re: Need Software RAID Help
    ... I've been googling and read the administrator's guide to software RAID ... to RAID which I couldn't do as the hard drives were already partitioned. ... So I deleted the suggested partitions and then switched them to no ... In the Expert option first make swap partitions on both drives, ...
    (alt.os.linux.suse)
  • Re: Ruined m-board with bios update
    ... I imagine if it works I would then get the bios screen after ... be able to continue to access the content on all 7 hard drives? ... According to Tom's Hardware site you can move a RAID 0 O.S. from ... be able to continue to access the content on the other RAID 0 partitions ...
    (microsoft.public.windows.mediacenter)
  • Re: Raid one
    ... It talks to the raid-1 being a superior way to back up your computer. ... I learned that raid mirrors partitions not hard drives. ...
    (Fedora)
  • LVM on SW RAID for sarge - success
    ... I've just had success migrating Debian Sarge to root on LVM on RAID. ... First make sure the SCSI BIOS boots from the first disk. ... I made reiserfs on all the filesystem partitions and completed the ... The remaining two disks were partitioned and used to create RAID arrays ...
    (Debian-User)
  • Re: Need Software RAID Help
    ... I've been googling and read the administrator's guide to software RAID but I'm still having problems getting it to work. ... It told me to change the partition's to RAID which I couldn't do as the hard drives were already partitioned. ... So I deleted the suggested partitions and then switched them to no format RAID partitions. ... In the Expert option first make swap partitions on both drives, ...
    (alt.os.linux.suse)