10.1 - floppy is a slug

Floppy seems to grab 64k at a time and struggle with it. Takes 5 minutes to copy a 250k file from the HDD to a 1.44. The CPU is not being hogged.I tried fresh disks and full format (which occurs at normal speed). Boot to windowz and there is no problem with the 1.44. Any ideas?
.

Relevant Pages

  • Re: Format Hard Drive
    ... prompt to insert floppy in drive a:. ... disk created by the program to install the drivers for SATA when you install ... This is the original hdd. ... I reformatted the NTFS partition of the WesternDigital hdd on a different ...
    (microsoft.public.windowsxp.general)
  • Re: Format Hard Drive
    ... prompt to insert floppy in drive a:. ... disk created by the program to install the drivers for SATA when you install ... This is the original hdd. ... I reformatted the NTFS partition of the WesternDigital hdd on a different ...
    (microsoft.public.windowsxp.general)
  • Re: 2 Bomb bus error
    ... c2-3 minutes from starting to use the floppy, ... I'm just trying to get the HDD setup. ... TC mode puts quite a load on the bus and can cause ... Atari Falcon, as opposed to someone productive such as the software ...
    (comp.sys.atari.st)
  • BIOS Bootloader a discussion in progress :)
    ... Thanks for the suggestion Samuel, but I have already tried that even though ... the floppy requires a setting of 0x4000 surely a HDD would reqiure a larger ... > Recompile to generate a new BLDR, ... It works best with a floppy ...
    (microsoft.public.windowsce.platbuilder)
  • Re: ValuePoint Update report ( HDD change )
    ... into BIOS, or suggest that I put in a floppy disk. ... Could you try an HDD> 540 MB, ... "defaults" to a floppy only boot up AFTER an unrecognized HDD is attached. ...
    (comp.sys.ibm.pc.classic)