Re: wireless network works in suse 10, but not suse 10.1



Martin Jørgensen wrote:

Martin Jørgensen wrote:
Hi,

I have a Dell Inspiron 8600 laptop and with suse 10, everything worked
right out of the box. Suse 10.1 finds the hardware correctly (both
ethernet + wireless) and the hardware is (Yast/Hardware information):

1) Broadcom Corporation BCM4401 100Base-T (Rev 01)

2) Intel PRO/Wireless LAN 2100 3B Mini PCI Adapter

Update:

I wont talk about 1), because I'm only interested in getting my wireless
working - that is number 2).

YaST2 says:

Device Name: wlan-bus-pci-0000:02:03.0
Started automatically on cable connection
IP address assigned using DHCP

My hostname is: "laptop",
I have "Change Hostname via DHCP" enabled,
Domain name = "site"
"Update Name Servers and Search List via DHCP" enabled,

Hardware details: Module name: ipw2100, no additional options,
DHCP options: "Request broadcast response" is disabled,
"DHCP Client identifier" is an empty field,
"Hostname to Send" = "AUTO",
"Additional addresses" is empty.


Question: eth0 = wired connection. Shouldn't I have something called
"eth1" for instance, so I could write "ifup eth1" and then the wireless
network starts?

Please help.

If I right-click "KNetworkManager" in the bottom right, I see that
wireless is enabled but "Show networks" shows empty "Trusted" and
"Untrusted" lists...



Best regards
Martin Jørgensen


Look at www.madwifi.org for the drivers for your wireless card they are no
longer included in suse10.1 there is a repository you can add then you can
use yast/smart to install it then all should be well ... I also have an
i8600 but I've upgraded my wireless to the dell truemobile 1300 b/g
wireless card so I use ndiswrapper.. but from everything I've read it all
points to that drive/package madwifi ... I just went to www.madwifi.org and
on the top right there is some info just for suse 10.1 users ...

--
In a world without walls or fences, who needs windows or gates?
-unknown-
.



Relevant Pages

  • Re: wireless network works in suse 10, but not suse 10.1
    ... I have a Dell Inspiron 8600 laptop and with suse 10, everything worked right out of the box. ... Suse 10.1 finds the hardware correctly and the hardware is: ... because I'm only interested in getting my wireless working - that is number 2). ... IP address assigned using DHCP ...
    (alt.os.linux.suse)
  • Re: Wireless pcmcia 9.2?
    ... Dell TrueMobile wireless works with Suse 9.1 out of the box. ... No problem except had to switch off hardware ... > identifies the four main chipset manufacurers. ...
    (alt.os.linux.suse)
  • Re: [SLE] [OLDIE] Re: [SLE] Intel PRO/Wireless 2200BG under SuSE 9.2?
    ... I wonder if anyone has any experience of getting the wireless eth-card ... SuSE and XP: DHCP, named ssid, WEP-ASCII-5char encryption. ... To attach, you want to have the KInternet tool running in your system tray. ...
    (SuSE)
  • Re: [SLE] SuSE 9.0 pro - ThinkPad X24 - wireless
    ... >> that I can not use wireless with DHCP. ... Gateway and DNS servers manually everything works. ... On boot I see that Wireless card gets IP from DHCP. ... Or SuSE can not write or update the file ...
    (SuSE)
  • Re: No IP wirelessly from DHCP
    ... Which hardware version of the WGR614? ... I vaguely recall that there were some versions of this router that had ... DHCP server problems and needed a firmware upgrade. ... which some wireless contrivances tend to block. ...
    (alt.internet.wireless)