Re: 2 Routers

On Mon, 4 Sep 2006, in the Usenet newsgroup alt.os.linux.suse, in article
<TLSdnfxsJZx3w2HZRVnyrw@xxxxxxxx>, miguel-lopes wrote:

Hello I have a linux Suse 9.3 installed and it is working fine but I
have a problem is how cam I serve 2 diferente networks.

Yes - that is exactly what you posted here last week.

A small Drawing

|-------router ( internet
|----router (

|-----IP 192.168.3.*

|-----IP 192.168.4.*

I'm sure that looked fine when you posted it - but it's pretty meaningless
when it gets to the news server. I'm _GUESSING_ the "box 1" is the one
you are worried about. The routing table should look something like this:

[example ~]$ /sbin/route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface U 0 0 89948 eth0 U 0 0 388 lo UG 0 0 23 eth0 UG 0 0 23 eth0 UG 0 0 23 eth0 UG 0 0 2673 eth0

and so on. The hosts on those other networks need to know to use the IP
address of the router on their wire (perhaps to reach back
to any non-local network. Perhaps it would look like this:

Destination Gateway Genmask Flags Metric Ref Use Iface U 0 0 89948 eth0 U 0 0 388 lo UG 0 0 2673 eth0

How can I do this??

The same way you were told to do so last week. Yast will do this for you.

Old guy

Relevant Pages

  • Re: Routing with 2 ISP
    ... Can i utilize by tools of Fedora, to have my configuration (with ... routing as well? ... Then I have a custom script called ... than what I've described (vmnet networks, port redirections, ...
  • Re: [SLE] Routing issues with eth1(internal) & eth2(external)
    ... > external interface from a machine on my internal network. ... You appear to have two Comcast networks assigned to you. ... allow routing between the two networks? ... You could add a static host route to LIBERTY1 and your D-Link Wireless ...
  • Re: Question on single host with mutiple subnets/gateways
    ... >> netmask and network routes, traffic should not go to default gateway ... > Sorry for my unclear description, here's the current routing table. ... This looks correct "if these are separate networks", ...
  • Re: RRAS - 3 SBS machines behind Pix firewall
    ... > Bob Lin, MS-MVP, MCSE & CNE ... >> Assuming these 3 networks are in the different subnets, ... you do need to configure the PIX for the routing. ...
  • Re: LAN-to-LANS routing
    ... Networking, Internet, Routing, VPN, Anti-Virus, Tips & Troubleshooting on ... > Unfortunately my knowledge of RRAS is fairly limited beyond what Ive read ... > is able to ping / access all the other networks, ... > to install RRAS or make any configuration changes to any of the machines ...