Re: NVIDIA driver problems under SLED 10...

Dave Littell wrote:
Hi all,

After completing a SLED 10 installation, the updater listed an NVIDIA
driver package. Having an NVIDIA 7900 GS-based card and ultimately
wanting to use Xgl/compiz, I selected it for installation. Oopsie. Now
X won't start and blaims the NVIDIA module, which in turn blames the
system for having some other riva or nv module already loaded.

Is there a way to correct this problem? I'm not at all sure what I
should have done differently, but there must still be some tricks to
getting the NVIDIA driver going that the updater doesn't do.


Thanks,
Dave
Here it is:

3. SUSE LINUX 10.1-IA32 / SLES10-IA32 / SLED10-IA32

It is recommended to use YaST for installation of the NVIDIA
driver. There are several reasons for this. First, it's
simple. Second, and this is the most important one, you won't need to
recompile the nvidia kernel module after a kernel update.

Update your Kernel via YOU (YaST Online Update). Use

YaST -> Software -> Change installation Source -> Add

Protocol: FTP
Server Name: : download.nvidia.com
Directory on Server: novell

to add the NVIDIA ftp server as additional installation source.
Now use

YaST -> Software -> Install and Delete Software

to install the NVIDIA driver. Select the following packages:

x11-video-nvidia
nvidia-gfx-kmp-"kernel-flavor"

"kernel-flavor" depends on your installed kernel. Check with
"uname -r" for installed default/smp/bigsmp kernel. Use "sax2 -r"
for X.Org configuration.

People who aren't afraid of recompiling the nvidia kernel module or
even reinstalling the nvidia driver each time the kernel has been
updated and want or need to use the latest and greatest nvidia driver
can use the following steps 1-3. The others should use the
instructions above using YaST and skip the steps below.

1) Kernel sources must be installed and configured. Usually this means
installing the 'kernel-source', 'make' and 'gcc' packages with YaST2.

2) Use the nvidia installer for 1.0-8774.

sh NVIDIA-Linux-x86-1.0-8774-pkg1.run -q

3) Configure X.Org with

sax2 -r -m 0=nvidia (0 is a digit, not a letter!)

NOTE: There is no need to try to enable 3D support. It's already
enabled, when the nvidia driver is running.

IMPORTANT: You need to recompile and install the nvidia kernel module
after each kernel update.

sh NVIDIA-Linux-x86-1.0-8774-pkg1.run -K





--

50% of all statistics are wrong. The rest don't matter.


Claude Hopper
.

Relevant Pages

  • Re: [Fedora] Re: Nvidia sucks, sucks, sucks !
    ... The problem was that installing the new kernel killed nvidia from ... -> There appears to already be a driver installed on your system ...
    (Fedora)
  • Re: nv driver support Asus N6600 video card?
    ... I installed the nVidia driver, and that driver allowed me to start ... I went to the nVidia website and downloaded the newest deriver for my ... It is packaged with a self-running installation script. ... nVidia FTP site to download a precompiled kernel module (kernel ...
    (comp.os.linux.hardware)
  • Re: Warning: Latest Kernel Sources on Sid
    ... Kqemu and Nvidia's driver were hit by this. ... I am using nvidia module. ... booting in the new kernel version): ... Their installer is simple: ...
    (Debian-User)
  • Re: [SLE] Nvidia / AV Out Not Center
    ... card may complicate the installation. ... Did all the online updates (excluding the nvidia driver) ... Now it does start up just fine If I set it to run off of a monitor. ...
    (SuSE)
  • Re: Fedora Core 6 HUGE problem - Binary drivers.
    ... in installing the driver that Nvidia makes freely available. ... The party-line argument that third party drivers cause support problems kind of falls on its face when the included driver doesn't work at all... ... the inability or refusal of the kernel developers to define a driver interface. ... In fedora the users lose. ...
    (Fedora)