Re: D-Link PCMCIA Wireless
On Fri, 27 Apr 2007 15:57:35 -0500, Paul Thompson wrote:
Just added a 10.2 partition. With 9.3 my D-Link WNA-2330 is detected and
set up without any problems. With 10.2 the card shows up in the
YaST2-Hardware-Hardware Information-Network Card section, but when I run
Network Devices-Network Card the D-Link is not found. Trying to add it
manually as PCMCIA doesn't work.
Thanks
Paul
Is mad-wifi installed?
.
Relevant Pages
- Re: Stumped: D-Link Network and PPC w/SanDisk WiFi Card
... > I have a home wireless home network that is all all D-Link ... D-Link 614+ router, and three PCs all with D- ... > Bought a SanDisk SDIO card a month ago. ... > (writing to OEM support), looking at internet articles, ... (microsoft.public.pocketpc.wireless) - Re: Realtek Ethernet controller (gigabit)
... My main Linux box runs SUSE 10.02 (is on the original Fast Ethernet LAN ... already with on board ethernet) and I have a spare D-Link DGE-528T ... Gigabit card I would like to use in it. ... low-level devices (physical ports and cables). ... (alt.os.linux.suse) - Help: DGE-560T not recognized by Linux
... but neither the sk98lin or skge drivers worked. ... to add a card ID, but it must be in there somewhere. ... 02:00.0 Ethernet controller: D-Link System Inc Unknown device 4b00 (rev ... Capabilities: Vital Product Data ... (Linux-Kernel) - Re: D-link DWL 650+ doesnt detect networks
... I've disabled the "4x" mode in the D-link configuration for the 650+. ... I'm a few feet from the repeater, and about 20 feet from the main router. ... When the card sees them, it sees both. ... I have another card, a Proxim Orinoco Gold 8420-WD, which detects and connects to the network just fine. ... (microsoft.public.windowsxp.network_web) - Re: D-link DWL 650+ doesnt detect networks
... I've disabled the "4x" mode in the D-link configuration for the 650+. ... I'm a few feet from the repeater, and about 20 feet from the main router. ... When the card sees them, it sees both. ... I have another card, a Proxim Orinoco Gold 8420-WD, which detects and connects to the network just fine. ... (microsoft.public.windowsxp.network_web) |
|