Re: PSE HELP: CUPS Server Vs. Windows Print server

Dans son message précédent, Ron Gibson a écrit :
On Thu, 31 May 2007 14:39:47 +0200, Roooooot wrote:

If I digg more, I see that there is few other functionnalities that are
unvailable through the CUPS server, but works fine by using the Win
print server.
I am using the same release of the driver, and same configuration of the
device (number of tray, paper size, etc...)
So, there is a solution to enable all functionnalities, or Windows have
some specials ways to talk to the printer ???
I'm not exactly sure what you are asking but it sounds like you are
asking if it's possible for windows users to access the Linux CUPS
configuration.

If so are you sure you want to do that ???

IIRC, if you really want to just bring up a browser and for the URL...

<Server address>:631, eg...

192.168.0.150:631

Of course you'll have to supply a password and all the permissions will
have to be right.

You could also use VNC.

My memory is a bit fuzzy on this as I've found once CUPS is set up you
so seldom need to fiddle with it you forget what you did before.

I guess the moral of this story is set it up right the first time and
then go play Warcraft or UT2004...

TNX for messages...

The driver is already installed in CUPS for Windows client

And it is working ....

But some advanced fuctionalities are not available under CUPS, but are available under a Windows print server

My situation is a litle bit tricky ;>)

Olivier .:


.

Relevant Pages

  • Re: DOS printing to a network printer
    ... > I need to print from a DOS program to a network printer on a print server. ... Set up the printer in windows initially. ... Forget about DOS for now. ... - Ensure the printer is using the new 'Standard TCP/IP port'. ...
    (microsoft.public.windowsxp.network_web)
  • Re: Anonymous print server in Windows 2003
    ... > Does anyone know how to configure anonymous access to a Windows 2003 ... > Windows 2003 member server configured as a print server. ... while being members of an old NT 4 domain or members of no ... Basically anonymous access is required to the print server. ...
    (microsoft.public.windows.server.networking)
  • Problem: only administrator can print to a redirected network printer
    ... A Laserjet 4 printer named Tom was connected to a Jetdirect ... and the Windows 2000 domain controller ALICE printed to ... The Jetdirect print server had been serving two (parallel- ...
    (microsoft.public.win2000.printing)
  • Re: Printing
    ... So AIX marks ... print server and talk directly to the printers. ... sets) that print through a Windows 2003 print server. ... while a print queue will hang causing the queues on all my other AIX ...
    (AIX-L)
  • Anonymous print server in Windows 2003
    ... Does anyone know how to configure anonymous access to a Windows 2003 ... Windows 2003 member server configured as a print server. ... while being members of an old NT 4 domain or members of no ... Basically anonymous access is required to the print server. ...
    (microsoft.public.windows.server.networking)