Re: openSUSE 11.1, nvidia 9600 KO - resolution problems....again!

John Kloosterman wrote:
Thomas Tootle wrote:
Greetings,

[snip]


[snip]


[snip}

Option "NoEDID"

or

Option "UseEDIDFreqs" "False"

or

Option "UseEDIDDpi" "FALSE"

or

Option "ModeValidation" "NoEdidModes"

(or a combination of them)
to the "monitor" section of the xorg.conf file?

Tried NoEDID with no success, then ModeValidation, and finally
UseEDIDFreqs False and UseEDIDDpi False and no joy. In addition, using
the command gtf 1680 1050 60 I got a mode line that I also put in the
monitor section. Bringing me back to what the /var/log states as the
validated modes of modes of "1400 x 1050" but will only display "1280x1024"

Sometimes the monitor reports the wrong values when it does the
handshake with the videocard, resulting in lock on a wrong resolution or
refresh value.


Must be my problem. Just wonder why this wasn't an issue with 11.0, Mint
or Ubuntu?

You also, as a last resort, can feed the "raw" values of this monitor by
using the next discription:

Option "CustomEDID" "string"

This option forces the X driver to use the EDID specified in a file
rather than the display's EDID. You may specify a semicolon separated
list of display names and filename pairs. The display name is any of
"CRT-0", "CRT-1", "DFP-0", "DFP-1", "TV-0", "TV-1". The file contains a
raw EDID (e.g., a file generated by nvidia-settings).

For example:

Option "CustomEDID" "CRT-0:/tmp/edid1.bin; DFP-0:/tmp/edid2.bin"

will assign the EDID from the file /tmp/edid1.bin to the display
device CRT-0, and the EDID from the file /tmp/edid2.bin to the display
device DFP-0.

Don't know how to generate this customEDID. Frankly scares me a little!

I cannot be helpfull with this last setting, because I never used it.

Hope this is of any help to you...

John.

Thanks for the help, John. I'll keep plugging away at it.

T
.

Relevant Pages

  • Re: Name change
    ... (application icons displayed on the dock often display information). ... slows down Windoze) - four CPU cores in two chips. ... It's displayed by the Temperature Monitor app, ...
    (uk.people.support.depression)
  • Re: DVI/HDMI displays no picture
    ... If you do not get the resolutions listed as available through EDID then go ... Also since your display has rectangular pixels if you get it to accept ... I have also run the TV monitor settings in MCE to tell I have a flat tv ...
    (microsoft.public.windows.mediacenter)
  • Re: openSUSE 11.1, nvidia 9600 KO - resolution problems....again!
    ... to the "monitor" section of the xorg.conf file? ... This option forces the X driver to use the EDID specified in a file ... list of display names and filename pairs. ...
    (alt.os.linux.suse)
  • Re: openSUSE 11.1, nvidia 9600 KO - resolution problems....again!
    ... to the "monitor" section of the xorg.conf file? ... Tried NoEDID with no success, then ModeValidation, and finally ... This option forces the X driver to use the EDID specified in a file ... list of display names and filename pairs. ...
    (alt.os.linux.suse)
  • Re: DVI/HDMI displays no picture
    ... S-video fed from from MCE and nVidia Geforce 5200 without problems, ... I have also run the TV monitor settings in MCE to tell I have a flat tv ... display" and my primary display according to nVidia is the ordinary ... NVIDIA cards will not work with the DVI information (EDID) received from ...
    (microsoft.public.windows.mediacenter)