Re: Re: Network transfer speed issues?
Date: Thu, 24 Jul 2003 22:33:41 GMT
Transferring 10megs should take maximum 20 seconds.
I have about the same configuration. But half dublex mode NICs.
It takes 10 to 20 secs.
> Thank you very much .. that was the problem.
> "Allen Kistler" <firstname.lastname@example.org> wrote in message
> > DiS gUy wrote:
> > > I have a situation that I cant figure out.
> > > For starters. Lets say I have a 2 computers both on 10baset T .. at
> > > duplex.
> > > Both these machines are located on a local lan using a 10base 24 port
> > > hub(3com)
> > >
> > > How long should it take to ftp from one system to another approx 10megs.
> > > The hub is not in any stress... no traffic!
> > >
> > > Right now Im transfering 20megs in approx 5 minutes. I find this
> > > slow.
> > >
> > > Could my 3com hub be ready for the trash. It is a few years old!
> > I don't know of any HUBS that support full duplex. Full duplex support
> > is rare at 10Mb, even so. Take your NICs out of full duplex and see
> > what happens.
Poster's IP address: 184.108.40.206
Posted via http://nodevice.com
Linux Programmer's Site