Re: XP/Linux dual boot, 2 disks

From: ChrisNews (chrisconlan_at_REMOVETHISoptushome.com.au)
Date: 07/28/04


Date: Wed, 28 Jul 2004 17:41:42 +1000


"Richard Adams" <myspam@spam.com> wrote in message
news:pan.2004.07.27.20.48.19.475629@spam.com...
> On Mon, 26 Jul 2004 22:57:27 +1000, ChrisNews wrote:
>
> > Hi.
> > I currently have XP running on GA-7n400 pro2 motherboard, XP2600, 512MB,
> > 120GB SATA.
> > In my BIOS, my SATA drive is not detected, I select to boot from SCSI
and
> > have SATAlink drivers installed for it to work, so i guess I can call it
> > SATA/SCSI unless it's called otherwise.
> > I have CDROM and CDRW on my second IDE channel, and want to install
Linux on
> > a 40GB disk on IDE1.
>
> Simply do what you want, technicly i see no problem, simply tell slackware
> to install lilo on the MBR it will install on the MBR of the IDE disk and
> leave all else alone.
> That meaning, choose IDE for slackware choose SATA for whatever else.
> When rebooting you can then choose to boot from IDE and will be presented
> with the lilo bootloader screen.

I thought of doing that, but I don't want to have to go into the BIOS to
change which disk i'm booting off each time i switch on

>
> > The plan is to install lilo on the linux root partition,
> > and boot with the NTloader.
> > The problem is i have no idea how to do this, During Slackware10.0
> > installation, i choose to install on /dev/hda1, swap on hda5, and a
> > fat32 share drive hda6 (pre-partitioned) I get to the lilo installation
> > and it won't install on the linux root partition, i got an error.
>
> Then do as i mentioned above, i do and it works fine.
>
> > Do I neet SATAlink drivers for linux to do install?
>
> Mo it does not sound like it at all as you are trying to install on an IDE
> disk are you not.?

Yes, but i would like access to the SATA drive from Linux

>
> > Could anyone offer me some help or point me in the right direction? I've
> > been googling for days!
>
> What i dont understand here is, you say your BIOS does not see your SATA
> drive but it allows you to boot from it.??? Something sounds not quite
> correct in that statement...
> What possably your problem is, is that you have not setup your BIOS
> properly to be able to boot from both IDE and SATA.
>
> I have a ABIT KV7 motherbaord with SATA and IDE and i can choose which
> ever drive i want to boot from be it ide master or slave from the primary
> controller master or slave from the secondary ide controller, SATA, ls120,
> network, cdrom floppy so on and so forth.

I can choose to boot from IDE primary or secondary, master or slave, ls120,
SCSI, network, cdrom, floppy. No SATA, but in the SCSI boot options, i can
choose Silicon Image controler for SATA. So it's a bit confusing whether the
Linux kernel will need SCSI support or just SATA drivers for linux will be
needed.

> One can have a bootloader on every drive to boot which ever partiton on
> that drive he/she wants to boot, its what they call the best of all worlds
> in todays modern motherbaords and BIOS's _providing_ one sets the BIOS
> correctly to do so.

Thanks heaps for you help, i'll give it a go on the IDE MBR, and look at the
SATA issue after installation.

>
> --
> If the Linux community is a bunch of thieves because they
> try to imitate windows programs, then the Windows community
> is built on organized crime.
>
> Regards Richard
> pa3gcu@zeelandnet.nl
> http://people.zeelandnet.nl/pa3gcu/
>
>



Relevant Pages

  • Re: XP Pro wont boot, safemode wont help, recovery console doesnt h
    ... Win XP Pro installed on a 300GB SATA drive, ... When trying to boot it gets to the standard Windows logo and after ... new install, which AFAIK would wipe the drive). ... the SATA HDD listed in Device Manager in the "Disk drives" section? ...
    (microsoft.public.windowsxp.general)
  • Re: ARC boot path question SATA vs IDE boot order
    ... rdisk = 1 for SATA = XP Pro. ... I can now install Vista x64 to the IDE drive ... [boot loader] ... The only thing it lacks is partition selection to find the OS. ...
    (microsoft.public.windowsxp.general)
  • Re: XP Pro wont boot, safemode wont help, recovery console doesnt h
    ... Win XP Pro installed on a 300GB SATA drive, ... When trying to boot it gets to the standard Windows logo and after ... new install, which AFAIK would wipe the drive). ... drives" section? ...
    (microsoft.public.windowsxp.general)
  • Re: Install Sata drivers
    ... >>> beacause it already includes all the required sata, raid, etc drivers. ... >>the purposes of allowing WinXP to install without pressing F6. ... > connected via IDE -- i.e., there's no necessity for these drives to ...
    (alt.comp.periphs.mainboard.asus)
  • Re: ARC boot path question SATA vs IDE boot order
    ... you got the IDE and SATA HD boot ... The only thing it lacks is partition selection to find the OS. ...
    (microsoft.public.windowsxp.general)