Re: Suse 9.1 no swap file being used

From: Deekin Scalesinger (deekin_at_gmail.com)
Date: 02/03/05 

Date: 2 Feb 2005 15:17:03 -0800

Ok -thanks to all so far. To the first answer regarding <<< swapon
/dev/hda2

It'll probably compain that something is wrong. If so, do

mkswap /dev/hda2
swapon /dev/hda2 >>>,

here is what I have:

/dev/hdb swap 1008.0 MB /75.3 GB

celestina:/home/matt # swapon /dev/hda1
swapon: /dev/hda1: Read-only file system
celestina:/home/matt # mkswap /dev/hda1
/dev/hda1: No such device or address
celestina:/home/matt # swapon /dev/hda1
swapon: /dev/hda1: Read-only file system
**********************************************************
To the question regarding output, here is what I got. Pack a lunch for
this :)

celestina:/home/matt # dmesg
Linux version 2.6.5-7.111.30-default (geeko@buildhost) (gcc version
3.3.3 (SuSE Linux)) #1 Fri Jan 14 12:58:46 UTC 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
128MB vmalloc/ioremap area available.
127MB HIGHMEM available.
896MB LOWMEM available.
On node 0 totalpages: 262128
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 225280 pages, LIFO batch:16
HighMem zone: 32752 pages, LIFO batch:7
DMI 2.2 present.
ACPI: RSDP (v000 VIAP4X ) @
0x000f5d50
ACPI: RSDT (v001 VIAP4X AWRDACPI 0x42302e31 AWRD 0x00000000) @
0x3fff3000
ACPI: FADT (v001 VIAP4X AWRDACPI 0x42302e31 AWRD 0x00000000) @
0x3fff3040
ACPI: DSDT (v001 VIAP4X AWRDACPI 0x00001000 MSFT 0x0100000c) @
0x00000000
ACPI: PM-Timer IO Port: 0x408
ACPI: local apic disabled
Built 1 zonelists
Kernel command line: root=/dev/hdb2 vga=0x317 desktop
resume=/dev/VolGroup00/LogVol01 splash=silent
bootsplash: silent mode.
Initializing CPU#0
PID hash table entries: 4096 (order 12: 32768 bytes)
CKRM Initialization
...... Initializing ClassType<taskclass> ........
...... Initializing ClassType<socket_class> ........
CKRM Initialization done
Detected 1497.784 MHz processor.
Using tsc for high-res timesource
Console: colour dummy device 80x25
Memory: 1034704k/1048512k available (1967k kernel code, 12856k
reserved, 692k data, 216k init, 131008k highmem)
Checking if this processor honours the WP bit even in supervisor
mode... Ok.
Calibrating delay loop... 2940.92 BogoMIPS
Security Scaffold v1.0.0 initialized
SELinux: Disabled at boot.
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 3febf9ff 00000000 00000000
00000000
CPU: After vendor identify, caps: 3febf9ff 00000000 00000000
00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 256K
CPU: After all inits, caps: 3febf9ff 00000000 00000000 00000080
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU#0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU#0: Thermal monitoring enabled
CPU: Intel(R) Pentium(R) 4 CPU 1500MHz stepping 0a
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
checking if image is initramfs...it isn't (no cpio magic); looks like
an initrd
Looking for DSDT in initrd ...No customized DSDT found in initrd!
Freeing initrd memory: 1102k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfb390, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI: IRQ9 SCI: Level Trigger.
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi' or even
'acpi=off'
vesafb: framebuffer at 0xd8000000, mapped to 0xf8806000, size 32768k
vesafb: mode is 1024x768x16, linelength=2048, pages=1
vesafb: protected mode interface info at c000:ea60
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
fb0: VESA VGA frame buffer device
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
apm: overridden by ACPI.
Initial HugeTLB pages allocated: 0
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Initializing Cryptographic API
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size
35400 bytes,<6>...found (1024x768, 16102 bytes, v3).
Console: switching to colour frame buffer device 118x41
Real Time Clock Driver v1.12
Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing
enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Using anticipatory io scheduler
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:11.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8233 (rev 00) IDE UDMA100 controller on pci0000:00:11.1
ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:pio, hdd:DMA
hda: HITACHI DVD-ROM GD-8000, ATAPI CD/DVD-ROM drive
hdb: Maxtor 6Y080L0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdd: TDK DVDRW880N, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hdb: max request size: 128KiB
hdb: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=65535/16/63,
UDMA(33)
hdb: hdb1 hdb2
ide-floppy driver 0.99.newide
mice: PS/2 mouse device common for all mice
input: PC Speaker
serio: i8042 AUX port at 0x60,0x64 irq 12
input: ImExPS/2 Generic Explorer Mouse on isa0060/serio1
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
NET: Registered protocol family 1
NET: Registered protocol family 8
NET: Registered protocol family 20
Resume Machine: resuming from /dev/VolGroup00/LogVol01
Resuming from device unknown-block(0,0)
Resume Machine: Error -6 resuming
ACPI: (supports S0 S1 S4 S5)
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
ReiserFS: hdb2: found reiserfs format "3.6" with standard journal
ReiserFS: hdb2: using ordered data mode
reiserfs: using flush barriers
ReiserFS: hdb2: journal params: device hdb2, size 8192, journal first
block 18, max trans len 1024, max batch 900, max commit age 30, max
trans age 30
ReiserFS: hdb2: checking transaction log (hdb2)
ReiserFS: hdb2: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Trying to move old root to /initrd ... failed
Unmounting old root
Trying to free ramdisk memory ... okay
Freeing unused kernel memory: 216k freed
Adding 1032152k swap on /dev/hdb1. Priority:42 extents:1
reiserfs: enabling write barrier flush mode
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com
subfs 0.9
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
ip6_tables: (C) 2000-2002 Netfilter core team
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (8191 buckets, 65528 max) - 300 bytes per
conntrack
e100: Intel(R) PRO/100 Network Driver, 3.0.17
e100: Copyright(c) 1999-2004 Intel Corporation
e100: eth0: e100_probe: addr 0xe3116000, irq 11, MAC addr
00:90:27:71:D7:74
usbcore: registered new driver usbfs
usbcore: registered new driver hub
SFW2-OUT-IPv6_PROHIB IN= OUT=eth0
SRC=0000:0000:0000:0000:0000:0000:0000:0000
DST=ff02:0000:0000:0000:0000:0001:ff71:d774 LEN=72 TC=0 HOPLIMIT=1
FLOWLBL=0 PROTO=0
e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
NET: Registered protocol family 17
SFW2-OUT-IPv6_PROHIB IN= OUT=eth0
SRC=0000:0000:0000:0000:0000:0000:0000:0000
DST=ff02:0000:0000:0000:0000:0001:ff71:d774 LEN=64 TC=0 HOPLIMIT=255
FLOWLBL=0 PROTO=ICMPv6 TYPE=135 CODE=0
SFW2-IN-ILL-TARGET IN=eth0 OUT=
MAC=00:90:27:71:d7:74:00:0f:66:53:f9:06:08:00 SRC=68.80.0.12
DST=192.168.1.106 LEN=149 TOS=0x00 PREC=0x00 TTL=249 ID=29099 DF
PROTO=UDP SPT=53 DPT=1024 LEN=129
SFW2-OUT-IPv6_PROHIB IN= OUT=eth0
SRC=fe80:0000:0000:0000:0290:27ff:fe71:d774
DST=ff02:0000:0000:0000:0000:0000:0000:0002 LEN=56 TC=0 HOPLIMIT=255
FLOWLBL=0 PROTO=ICMPv6 TYPE=133 CODE=0
ieee1394: Initialized config rom entry `ip1394'
ohci1394: $Rev: 1203 $ Ben Collins <bcollins@debian.org>
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11]
MMIO=[e3115000-e31157ff] Max Packet=[2048]
Linux agpgart interface v0.100 (c) Dave Jones
SFW2-OUT-IPv6_PROHIB IN= OUT=eth0
SRC=fe80:0000:0000:0000:0290:27ff:fe71:d774
DST=ff02:0000:0000:0000:0000:0001:ff71:d774 LEN=72 TC=0 HOPLIMIT=1
FLOWLBL=0 PROTO=0
gameport: pci0000:00:0b.1 speed 978 kHz
agpgart: Detected VIA Twister-K/KT133x/KM133 chipset
agpgart: Maximum main memory to use for agp memory: 941M
agpgart: AGP aperture is 128M @ 0xd0000000
NET: Registered protocol family 23
via_ircc: unsupported module, tainting kernel.
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00d0035600a6358b]
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver
(PCI)
ohci_hcd: block sizes: ed 64 td 64
ohci_hcd 0000:00:09.0: OHCI Host Controller
ohci_hcd 0000:00:09.0: irq 11, pci mem fac4e000
ohci_hcd 0000:00:09.0: new USB bus registered, assigned bus number 1
usb usb1: Product: OHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.5-7.111.30-default ohci_hcd
usb usb1: SerialNumber: 0000:00:09.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ohci_hcd 0000:00:09.1: OHCI Host Controller
ohci_hcd 0000:00:09.1: irq 5, pci mem fac50000
ohci_hcd 0000:00:09.1: new USB bus registered, assigned bus number 2
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.5-7.111.30-default ohci_hcd
usb usb2: SerialNumber: 0000:00:09.1
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
SFW2-OUT-IPv6_PROHIB IN= OUT=eth0
SRC=fe80:0000:0000:0000:0290:27ff:fe71:d774
DST=ff02:0000:0000:0000:0000:0000:0000:0002 LEN=56 TC=0 HOPLIMIT=255
FLOWLBL=0 PROTO=ICMPv6 TYPE=133 CODE=0
ehci_hcd 0000:00:09.2: EHCI Host Controller
ehci_hcd 0000:00:09.2: irq 11, pci mem fac52000
ehci_hcd 0000:00:09.2: new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:09.2: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.5-7.111.30-default ehci_hcd
usb usb3: SerialNumber: 0000:00:09.2
SFW2-IN-ILL-TARGET IN=eth0 OUT=
MAC=00:90:27:71:d7:74:00:0f:66:53:f9:06:08:00 SRC=68.80.0.5
DST=192.168.1.106 LEN=149 TOS=0x00 PREC=0x00 TTL=249 ID=42231 DF
PROTO=UDP SPT=53 DPT=1025 LEN=129
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 5 ports detected
USB Universal Host Controller Interface driver v2.2
uhci_hcd 0000:00:11.2: UHCI Host Controller
uhci_hcd 0000:00:11.2: irq 11, io base 0000d400
uhci_hcd 0000:00:11.2: new USB bus registered, assigned bus number 4
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.5-7.111.30-default uhci_hcd
usb usb4: SerialNumber: 0000:00:11.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:11.3: UHCI Host Controller
uhci_hcd 0000:00:11.3: irq 11, io base 0000d800
uhci_hcd 0000:00:11.3: new USB bus registered, assigned bus number 5
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.5-7.111.30-default uhci_hcd
usb usb5: SerialNumber: 0000:00:11.3
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:11.4: UHCI Host Controller
uhci_hcd 0000:00:11.4: irq 11, io base 0000dc00
uhci_hcd 0000:00:11.4: new USB bus registered, assigned bus number 6
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.5-7.111.30-default uhci_hcd
usb usb6: SerialNumber: 0000:00:11.4
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
SFW2-OUT-IPv6_PROHIB IN= OUT=eth0
SRC=fe80:0000:0000:0000:0290:27ff:fe71:d774
DST=ff02:0000:0000:0000:0000:0000:0000:0002 LEN=56 TC=0 HOPLIMIT=255
FLOWLBL=0 PROTO=ICMPv6 TYPE=133 CODE=0
eth0: no IPv6 routers present
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Processor [CPU0] (supports C1 C2, 2 throttling states)
powernow: This module only works with AMD K7 CPUs
parport0: PC-style at 0x378 [PCSPP,TRISTATE]
parport0: irq 7 detected
lp0: using parport0 (polling).
drivers/usb/serial/usb-serial.c: USB Serial support registered for
Generic
usbcore: registered new driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0
Non-volatile memory driver v1.2
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
hda: ATAPI 40X DVD-ROM drive, 512kB Cache
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
SCSI subsystem initialized
st: Version 20040318, fixed bufsize 32768, s/g segs 256
BIOS EDD facility v0.13 2004-Mar-09, 1 devices found
nvidia: unsupported module, tainting kernel.
nvidia: module license 'NVIDIA' taints kernel.
0: nvidia: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-5336 Wed
Jan 14 18:29:26 PST 2004
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
atkbd.c: Unknown key pressed (translated set 2, code 0xbf on
isa0060/serio0).
atkbd.c: Use 'setkeycodes e03f <keycode>' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0xbf on
isa0060/serio0).
atkbd.c: Use 'setkeycodes e03f <keycode>' to make it known.
SFW2-OUT-IPv6_PROHIB IN= OUT=eth0
SRC=0000:0000:0000:0000:0000:0000:0000:0000
DST=ff02:0000:0000:0000:0000:0000:0000:0002 LEN=72 TC=0 HOPLIMIT=1
FLOWLBL=0 PROTO=0
e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
SFW2-OUT-IPv6_PROHIB IN= OUT=eth0
SRC=0000:0000:0000:0000:0000:0000:0000:0000
DST=ff02:0000:0000:0000:0000:0001:ff71:d774 LEN=72 TC=0 HOPLIMIT=1
FLOWLBL=0 PROTO=0
SFW2-OUT-IPv6_PROHIB IN= OUT=eth0
SRC=0000:0000:0000:0000:0000:0000:0000:0000
DST=ff02:0000:0000:0000:0000:0001:ff71:d774 LEN=64 TC=0 HOPLIMIT=255
FLOWLBL=0 PROTO=ICMPv6 TYPE=135 CODE=0
SFW2-OUT-IPv6_PROHIB IN= OUT=eth0
SRC=fe80:0000:0000:0000:0290:27ff:fe71:d774
DST=ff02:0000:0000:0000:0000:0000:0000:0002 LEN=56 TC=0 HOPLIMIT=255
FLOWLBL=0 PROTO=ICMPv6 TYPE=133 CODE=0
martian source 255.255.255.255 from 192.168.1.1, on dev eth0
ll header: ff:ff:ff:ff:ff:ff:00:0f:66:53:f9:06:08:00
martian source 255.255.255.255 from 192.168.1.1, on dev eth0
ll header: ff:ff:ff:ff:ff:ff:00:0f:66:53:f9:06:08:00
SFW2-IN-ILL-TARGET IN=eth0 OUT=
MAC=00:90:27:71:d7:74:00:0f:66:53:f9:06:08:00 SRC=68.80.0.12
DST=192.168.1.109 LEN=149 TOS=0x00 PREC=0x00 TTL=249 ID=46825 DF
PROTO=UDP SPT=53 DPT=1109 LEN=129
SFW2-OUT-IPv6_PROHIB IN= OUT=eth0
SRC=fe80:0000:0000:0000:0290:27ff:fe71:d774
DST=ff02:0000:0000:0000:0000:0001:ff71:d774 LEN=72 TC=0 HOPLIMIT=1
FLOWLBL=0 PROTO=0
SFW2-OUT-IPv6_PROHIB IN= OUT=eth0
SRC=fe80:0000:0000:0000:0290:27ff:fe71:d774
DST=ff02:0000:0000:0000:0000:0000:0000:0002 LEN=56 TC=0 HOPLIMIT=255
FLOWLBL=0 PROTO=ICMPv6 TYPE=133 CODE=0
SFW2-IN-ILL-TARGET IN=eth0 OUT=
MAC=00:90:27:71:d7:74:00:0f:66:53:f9:06:08:00 SRC=68.80.0.5
DST=192.168.1.109 LEN=149 TOS=0x00 PREC=0x00 TTL=249 ID=59967 DF
PROTO=UDP SPT=53 DPT=1110 LEN=129
SFW2-OUT-IPv6_PROHIB IN= OUT=eth0
SRC=fe80:0000:0000:0000:0290:27ff:fe71:d774
DST=ff02:0000:0000:0000:0000:0000:0000:0002 LEN=56 TC=0 HOPLIMIT=255
FLOWLBL=0 PROTO=ICMPv6 TYPE=133 CODE=0
eth0: no IPv6 routers present
SFW2-IN-ILL-TARGET IN=eth0 OUT=
MAC=00:90:27:71:d7:74:00:0f:66:53:f9:06:08:00 SRC=68.80.0.12
DST=192.168.1.109 LEN=149 TOS=0x00 PREC=0x00 TTL=249 ID=46826 DF
PROTO=UDP SPT=53 DPT=1109 LEN=129
SFW2-IN-ILL-TARGET IN=eth0 OUT=
MAC=00:90:27:71:d7:74:00:0f:66:53:f9:06:08:00 SRC=68.80.0.5
DST=192.168.1.109 LEN=149 TOS=0x00 PREC=0x00 TTL=249 ID=59968 DF
PROTO=UDP SPT=53 DPT=1110 LEN=129
parport0: PC-style at 0x378 [PCSPP,TRISTATE]
lp0: using parport0 (polling).
ppa: Version 2.07 (for Linux 2.4.x)
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
cdrom: open failed.
cdrom: open failed.
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
parport0: PC-style at 0x378 [PCSPP,TRISTATE]
parport0: PC-style at 0x378 [PCSPP,TRISTATE]
parport0: irq 7 detected
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
parport0: PC-style at 0x378 [PCSPP,TRISTATE]
ppa: Version 2.07 (for Linux 2.4.x)
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
parport0: PC-style at 0x378 [PCSPP,TRISTATE]
ppa: Version 2.07 (for Linux 2.4.x)
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
cdrom: open failed.
cdrom: open failed.
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
cdrom: open failed.
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
cdrom: open failed.
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
**********************************************************
and finally, the results of the fdisk:

celestina:/home/matt # fdisk -l /dev/hdb

Disk /dev/hdb: 81.9 GB, 81964302336 bytes
16 heads, 63 sectors/track, 158816 cylinders
Units = cylinders of 1008 * 512 = 516096 bytes

Device Boot Start End Blocks Id System
/dev/hdb1 1 2048 1032160+ 82 Linux swap
/dev/hdb2 2049 158816 79011072 83 Linux
celestina:/home/matt # swapoff -a
celestina:/home/matt # swapon -a
swapon: cannot stat /dev/VolGroup00/LogVol01: No such file or directory
**********************************************************
any advice after the analysis is welcomed. Thank you!!!

Quantcast