FC3 box power off at 7:49 am!!

bellutta_at_yahoo.com
Date: 04/26/05

  • Next message: Sybren Stuvel: "Re: ok... got the basics, now for the big one" 
    Date: 25 Apr 2005 21:39:40 -0700

    In 20+ years of using one flavor of *nix or the other I have never seen
    anything like this. Every morning, between 7:30am and 8:00am PDT my
    linux box at home power off without any warning. It does *not* crash,
    it simply powers off on its own. Just like you were removing the plug
    from the wall.

    On this box (P4@2.4GHz, ASUS P4s533-mx mobo, 1GB ram, 400GB disk see
    dmesg below) I am running a box where I have installed a stock Fedora
    Core 3. I run a httpd, sendmail, named, squirrelmail, ntpd, sshd
    servers for my own domain. I am running iptables and have a Linksys
    hardware firewall towards my DSL line. The box has it own dedicated
    UPS. This system configuration used to run for months without any
    single glitch.

    I checked the temperature of processor, memory, power supply and seem
    to be fine. I checked the voltages on the power supply and they are
    fine. This happens whether I am working on the system or if the system
    is sitting there. I have saved for 24 hours the output of tcpdump and
    I have not noticed any suspiciuous activity. If during the day I set
    the clock before that time range (say it is 5pm and I set the hw and
    sys clock to 7:30am) the system after a while powers off. Anacron and
    atd are stopped and I checked all cron files.

    I am getting close to exhausting all my options of what to try next and
    I was wondering if anybody had ever seen anything like this and had any
    suggestions on how to nail down what is making the system go down. At
    this poing I don't even know if it is HW related or not!

    Thanks.

    Paolo

    ------------------------ /var/log/dmesg
    ------------------------------------
    Linux version 2.6.9-1.667 (bhcompile@tweety.build.redhat.com) (gcc
    version 3.4.2 20041017 (Red Hat 3.4.2-6.fc3)) #1 Tue Nov 2 14:41:25 EST
    2004
    BIOS-provided physical RAM map:
     BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
     BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
     BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
     BIOS-e820: 0000000000100000 - 000000001dffc000 (usable)
     BIOS-e820: 000000001dffc000 - 000000001dfff000 (ACPI data)
     BIOS-e820: 000000001dfff000 - 000000001e000000 (ACPI NVS)
     BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
     BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
     BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
    0MB HIGHMEM available.
    479MB LOWMEM available.
    zapping low mappings.
    On node 0 totalpages: 122876
      DMA zone: 4096 pages, LIFO batch:1
      Normal zone: 118780 pages, LIFO batch:16
      HighMem zone: 0 pages, LIFO batch:1
    DMI 2.3 present.
    ACPI: RSDP (v000 ASUS ) @ 0x000f56f0
    ACPI: RSDT (v001 ASUS P4S533MX 0x42302e31 MSFT 0x31313031) @
    0x1dffc000
    ACPI: FADT (v001 ASUS P4S533MX 0x42302e31 MSFT 0x31313031) @
    0x1dffc0c0
    ACPI: BOOT (v001 ASUS P4S533MX 0x42302e31 MSFT 0x31313031) @
    0x1dffc030
    ACPI: MADT (v001 ASUS P4S533MX 0x42302e31 MSFT 0x31313031) @
    0x1dffc058
    ACPI: DSDT (v001 ASUS P4S533MX 0x00001000 MSFT 0x0100000b) @
    0x00000000
    ACPI: PM-Timer IO Port: 0xe408
    Built 1 zonelists
    Kernel command line: ro root=LABEL=/ rhgb quiet
    mapped 4G/4G trampoline to ffff4000.
    Initializing CPU#0
    CPU 0 irqstacks, hard=023d5000 soft=023d4000
    PID hash table entries: 2048 (order: 11, 32768 bytes)
    Detected 2394.421 MHz processor.
    Using tsc for high-res timesource
    Console: colour VGA+ 80x25
    Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
    Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
    Memory: 483016k/491504k available (2068k kernel code, 7916k reserved,
    647k data, 144k init, 0k highmem)
    Calibrating delay loop... 4734.97 BogoMIPS (lpj=2367488)
    Security Scaffold v1.0.0 initialized
    SELinux: Initializing.
    SELinux: Starting in permissive mode
    There is already a security framework initialized, register_security
    failed.
    selinux_register_security: Registering secondary module capability
    Capability LSM initialized as secondary
    Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
    CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000
    CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000
    CPU: Trace cache: 12K uops, L1 D cache: 8K
    CPU: L2 cache: 512K
    CPU: After all inits, caps: bfebf3ff 00000000 00000000 00000080
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#0.
    CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
    CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 07
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Checking 'hlt' instruction... OK.
    ACPI: IRQ9 SCI: Level Trigger.
    checking if image is initramfs... it is
    Freeing initrd memory: 387k freed
    NET: Registered protocol family 16
    PCI: PCI BIOS revision 2.10 entry at 0xf10d0, last bus=1
    PCI: Using configuration type 1
    mtrr: v2.0 (20020519)
    ACPI: Subsystem revision 20040816
    ACPI: Interpreter enabled
    ACPI: Using PIC for interrupt routing
    ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0,
    disabled.
    ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *9
    ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0,
    disabled.
    ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *9
    ACPI: PCI Root Bridge [PCI0] (00:00)
    PCI: Probing PCI hardware (bus 00)
    Enabling SiS 96x SMBus.
    PCI: Ignoring BAR0-3 of IDE controller 0000:00:02.5
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
    Linux Plug and Play Support v0.97 (c) Adam Belay
    usbcore: registered new driver usbfs
    usbcore: registered new driver hub
    PCI: Using ACPI for IRQ routing
    ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
    ACPI: PCI interrupt 0000:00:02.1[B] -> GSI 11 (level, low) -> IRQ 11
    ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
    ACPI: PCI interrupt 0000:00:02.5[A] -> GSI 11 (level, low) -> IRQ 11
    ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
    ACPI: PCI interrupt 0000:00:02.7[C] -> GSI 10 (level, low) -> IRQ 10
    ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 5
    ACPI: PCI interrupt 0000:00:03.0[A] -> GSI 5 (level, low) -> IRQ 5
    ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 10
    ACPI: PCI interrupt 0000:00:03.1[B] -> GSI 10 (level, low) -> IRQ 10
    ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
    ACPI: PCI interrupt 0000:00:03.3[D] -> GSI 11 (level, low) -> IRQ 11
    ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 3
    ACPI: PCI interrupt 0000:00:04.0[A] -> GSI 3 (level, low) -> IRQ 3
    ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11
    Simple Boot Flag at 0x3a set to 0x1
    apm: BIOS version 1.2 Flags 0x0b (Driver version 1.16ac)
    apm: overridden by ACPI.
    audit: initializing netlink socket (disabled)
    audit(1114460808.757:0): initialized
    Total HugeTLB memory allocated, 0
    VFS: Disk quotas dquot_6.5.1
    Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    SELinux: Registering netfilter hooks
    Initializing Cryptographic API
    ksign: Installing public key data
    Loading keyring
    - Added public key 6ECDA687281A73E5
    - User ID: Red Hat, Inc. (Kernel Module GPG key)
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    vesafb: probe of vesafb0 failed with error -6
    ACPI: Processor [CPU0] (supports C1)
    isapnp: Scanning for PnP cards...
    isapnp: No Plug & Play device found
    Real Time Clock Driver v1.12
    Linux agpgart interface v0.100 (c) Dave Jones
    agpgart: Detected SiS 651 chipset
    agpgart: Maximum main memory to use for agp memory: 409M
    agpgart: AGP aperture is 64M @ 0xe8000000
    serio: i8042 AUX port at 0x60,0x64 irq 12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing
    enabled
    ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
    divert: not allocating divert_blk for non-ethernet device lo
    Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
    ide: Assuming 33MHz system bus speed for PIO modes; override with
    idebus=xx
    SIS5513: IDE controller at PCI slot 0000:00:02.5
    ACPI: PCI interrupt 0000:00:02.5[A] -> GSI 11 (level, low) -> IRQ 11
    SIS5513: chipset revision 0
    SIS5513: not 100% native mode: will probe irqs later
    SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller
        ide0: BM-DMA at 0xa400-0xa407, BIOS settings: hda:DMA, hdb:DMA
        ide1: BM-DMA at 0xa408-0xa40f, BIOS settings: hdc:pio, hdd:DMA
    Probing IDE interface ide0...
    hda: Maxtor 6Y200P0, ATA DISK drive
    hdb: Maxtor 6Y200P0, ATA DISK drive
    Using cfq io scheduler
    ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
    Probing IDE interface ide1...
    hdd: NU DVDRW DDW-061, ATAPI CD/DVD-ROM drive
    ide1 at 0x170-0x177,0x376 on irq 15
    Probing IDE interface ide2...
    ide2: Wait for ready failed before probe !
    Probing IDE interface ide3...
    ide3: Wait for ready failed before probe !
    Probing IDE interface ide4...
    ide4: Wait for ready failed before probe !
    Probing IDE interface ide5...
    ide5: Wait for ready failed before probe !
    hda: max request size: 1024KiB
    hda: 398297088 sectors (203928 MB) w/7936KiB Cache, CHS=24792/255/63,
    UDMA(133)
    hda: cache flushes supported
     hda: hda1 hda2 hda3 hda4
    hdb: max request size: 1024KiB
    hdb: 398297088 sectors (203928 MB) w/7936KiB Cache, CHS=24792/255/63,
    UDMA(133)
    hdb: cache flushes supported
     hdb: hdb1
    hdd: ATAPI 40X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
    Uniform CD-ROM driver Revision: 3.20
    ide-floppy driver 0.99.newide
    usbcore: registered new driver hiddev
    usbcore: registered new driver usbhid
    drivers/usb/input/hid-core.c: v2.0:USB HID core driver
    mice: PS/2 mouse device common for all mice
    input: AT Translated Set 2 keyboard on isa0060/serio0
    input: PS2++ Logitech Mouse on isa0060/serio1
    md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
    NET: Registered protocol family 2
    IP: routing cache hash table of 1024 buckets, 32Kbytes
    TCP: Hash tables configured (established 32768 bind 9362)
    Initializing IPsec netlink socket
    NET: Registered protocol family 1
    NET: Registered protocol family 17
    ACPI: (supports S0 S1 S3 S4 S5)
    ACPI wakeup devices:
    PCI0 PCI1 PS2K PS2M USB0 USB3 USB1 USB2 AC97
    Freeing unused kernel memory: 144k freed
    kjournald starting. Commit interval 5 seconds
    EXT3-fs: mounted filesystem with ordered data mode.
    security: 3 users, 4 roles, 280 types, 16 bools
    security: 53 classes, 5494 rules
    SELinux: Completing initialization.
    SELinux: Setting up existing superblocks.
    SELinux: initialized (dev hda4, type ext3), uses xattr
    SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
    SELinux: initialized (dev selinuxfs, type selinuxfs), uses
    genfs_contexts
    SELinux: initialized (dev mqueue, type mqueue), not configured for
    labeling
    SELinux: initialized (dev hugetlbfs, type hugetlbfs), not configured
    for labeling
    SELinux: initialized (dev devpts, type devpts), uses transition SIDs
    SELinux: initialized (dev eventpollfs, type eventpollfs), uses
    genfs_contexts
    SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
    SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
    SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
    SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
    SELinux: initialized (dev proc, type proc), uses genfs_contexts
    SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
    SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
    SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
    SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
    inserting floppy driver for 2.6.9-1.667
    Floppy drive(s): fd0 is 1.44M
    FDC 0 is a post-1991 82077
    sis900.c: v1.08.07 11/02/2003
    ACPI: PCI interrupt 0000:00:04.0[A] -> GSI 3 (level, low) -> IRQ 3
    divert: allocating divert_blk for eth0
    eth0: Realtek RTL8201 PHY transceiver found at address 1.
    eth0: Using transceiver found at address 1 as default
    eth0: SiS 900 PCI Fast Ethernet at 0x8800, IRQ 3, 00:0c:6e:43:0e:25.
    ACPI: PCI interrupt 0000:00:02.7[C] -> GSI 10 (level, low) -> IRQ 10
    AC'97 0 analog subsections not ready
    intel8x0_measure_ac97_clock: measured 49453 usecs
    intel8x0: clocking to 48000
    ACPI: PCI interrupt 0000:00:03.3[D] -> GSI 11 (level, low) -> IRQ 11
    ehci_hcd 0000:00:03.3: EHCI Host Controller
    ehci_hcd 0000:00:03.3: irq 11, pci mem 20832000
    SELinux: initialized (dev usbdevfs, type usbdevfs), uses genfs_contexts
    ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1
    PCI: cache line size of 128 is not supported by device 0000:00:03.3
    ehci_hcd 0000:00:03.3: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 6 ports detected
    ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver
    (PCI)
    ACPI: PCI interrupt 0000:00:03.0[A] -> GSI 5 (level, low) -> IRQ 5
    ohci_hcd 0000:00:03.0: OHCI Host Controller
    ohci_hcd 0000:00:03.0: irq 5, pci mem 208b4000
    ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 3 ports detected
    ACPI: PCI interrupt 0000:00:03.1[B] -> GSI 10 (level, low) -> IRQ 10
    ohci_hcd 0000:00:03.1: OHCI Host Controller
    ohci_hcd 0000:00:03.1: irq 10, pci mem 208b6000
    ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 3 ports detected
    md: Autodetecting RAID arrays.
    md: autorun ...
    md: ... autorun DONE.
    ohci_hcd 0000:00:03.0: wakeup
    usb 2-1: new full speed USB device using address 2
    SCSI subsystem initialized
    Initializing USB Mass Storage driver...
    scsi0 : SCSI emulation for USB Mass Storage devices
      Vendor: 3SYSTEM Model: USB FLASH DISK Rev: 1.00
      Type: Direct-Access ANSI SCSI revision: 02
    USB Mass Storage device found at 2
    usbcore: registered new driver usb-storage
    USB Mass Storage support registered.
    SCSI device sda: 512000 512-byte hdwr sectors (262 MB)
    sda: Write Protect is off
    sda: Mode Sense: 0b 00 00 08
    sda: assuming drive cache: write through
     sda: sda1
    Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
    ACPI: Power Button (FF) [PWRF]
    EXT3 FS on hda4, internal journal
    device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com
    cdrom: open failed.
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on hdb1, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    SELinux: initialized (dev hdb1, type ext3), uses xattr
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on hda1, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    SELinux: initialized (dev hda1, type ext3), uses xattr
    SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on hda3, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    SELinux: initialized (dev hda3, type ext3), uses xattr
    Adding 10241428k swap on /dev/hda2. Priority:-1 extents:1
    SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses
    genfs_contexts

  • Next message: Sybren Stuvel: "Re: ok... got the basics, now for the big one"
    • Quantcast