Re: internet trouble

From: ivan danicic (ivan_at_goaway.spam)
Date: 10/14/05


Date: Fri, 14 Oct 2005 11:53:45 GMT

chris dewbery wrote:

> Ivan Danicic wrote:
>
> [snip]
>>> related subnet declarations.
>> Oct 13 19:21:44 linux dhcpd: /var/lib/dhcp///etc/dhcpd.conf line 67: Pool
>> declaration with no address range.
>> Oct 13 19:21:44 linux dhcpd: }
>> Oct 13 19:21:44 linux dhcpd: ^
> [snip]
>
> looks like you could have something wrong with your settings in
> /etc/dhcpd.conf
>
> can you please post the output of this file.
>
> chris.
Hello Chris et al, I now have connection to the internet, using dhcp. The
change I made was to tick "let dhcp choose nameserver and searchlist".I
still can't get YAST to connect to the internet. Here is /etc/dhcpd.conf:
# dhcpd.conf
#
# Sample configuration file for ISC dhcpd
#
# option definitions common to all supported networks...
option domain-name "example.org";
option domain-name-servers ns1.example.org, ns2.example.org;
default-lease-time 600;
max-lease-time 7200;
# if you do not use dynamical DNS updates:
#
# this statement is needed by dhcpd-3 needs at least this statement.
# you have to delete it for dhcpd-2, because it does not know it.
#
# if you want to use dynamical DNS updates, you should first read
# read /usr/share/doc/packages/dhcp-server/DDNS-howto.txt
ddns-update-style none;
ddns-updates off;
# If this DHCP server is the official DHCP server for the local
# network, the authoritative directive should be uncommented.
#authoritative;
# Use this to send dhcp log messages to a different log file (you also
# have to hack syslog.conf to complete the redirection).
log-facility local7;
# No service will be given on this subnet, but declaring it helps the
# DHCP server to understand the network topology.
subnet 10.152.187.0 netmask 255.255.255.0 {
}
# Hosts which require special configuration options can be listed in
# host statements. If no address is specified, the address will be
# allocated dynamically (if possible), but the host-specific information
# will still come from the host declaration.
host passacaglia {
  hardware ethernet 0:0:c0:5d:bd:95;
  filename "vmunix.passacaglia";
  server-name "toccata.fugue.com";
}
# Fixed IP addresses can also be specified for hosts. These addresses
# should not also be listed as being available for dynamic assignment.
# Hosts for which fixed IP addresses have been specified can boot using
# BOOTP or DHCP. Hosts for which no fixed address is specified can only
# be booted with DHCP, unless there is an address range on the subnet
# to which a BOOTP client is connected which has the dynamic-bootp flag
# set.
host fantasia {
  hardware ethernet 08:00:07:26:c0:a5;
  fixed-address fantasia.fugue.com;
}
# You can declare a class of clients and then do address allocation
# based on that. The example below shows a case where all clients
# in a certain class get addresses on the 10.17.224/24 subnet, and all
# other clients get addresses on the 10.0.29/24 subnet.
class "foo" {
  match if substring (option vendor-class-identifier, 0, 4) = "SUNW";
}
shared-network 224-29 {
  subnet 10.17.224.0 netmask 255.255.255.0 {
    option routers rtr-224.example.org;
  }
  pool {
    allow members of "foo";
    range 10.17.224.10 10.17.224.250;
  }
  pool {
    deny members of "foo";
    range 10.0.29.10 10.0.29.230;
  }
}



Relevant Pages

  • Re: Running out of DHCP address leases howto rectify?
    ... which also hosts DNS and DHCP for 4 floors. ... We have about 20 DHCP leases available on the existing 147.109.x.y ... This subnet needs to be migrated to a 10.16.128.0/23 subnet range ... If you want to keep with the separate subnets for each floor, ...
    (microsoft.public.windows.server.general)
  • Re: Noob basic network segmenting help
    ... If I put a router on each floor for each new subnet what are the implications for DHCP, domain controllers, etc? ... How does a host on one subnet get a DHCP address in the correct range from a domain controller on a different subnet? ... Do one segment for every 200+/- hosts. ... A good way to have a multi-interface Router is to buy a Layer3 Switch and group the ports into "interfaces" associated with each segment. ...
    (microsoft.public.windows.server.networking)
  • Re: Noob basic network segmenting help
    ... subnet per floor to allow more hosts and more management of traffic ... If I put a router on each floor for each new subnet what are the ... implications for DHCP, domain controllers, etc? ... It'd be cheaper to use one Router with enough Interfaces for each segment. ...
    (microsoft.public.windows.server.networking)
  • Make a DHCP server using Fedora - Help
    ... No subnet declaration for eth0. ... This version of ISC DHCP is based on the release available ... # Fixed IP addresses can also be specified for hosts. ... # to which a BOOTP client is connected which has the dynamic-bootp flag ...
    (Fedora)
  • Re: [SLE] config of dhcpd server under 9.1
    ... please write a subnet declaration ... > So how do your subnet declarations look like, ... # Fixed IP addresses can also be specified for hosts. ... # to which a BOOTP client is connected which has the dynamic-bootp flag ...
    (SuSE)