Trouble with screen resolution in Nvidia drivers
- From: Arve Tengesdal <arve.tengesdal@xxxxxxxx>
- Date: Sun, 04 Jun 2006 00:01:04 +0200
Hi!I've got some trouble when I installed the nvidia drivers. I've got a
nvidia Geforce 6800 AGP card, and a 19 inch flatscreen monitor. The
problem is that when I install the drivers from nvidia, my screen
resolution turns from default 60 Hz to 75, which is no good. Also, the
resolution turns bad. When I modify the xconf.org - the driver module from
nvidia to nv, it goes OK. Can anyone help me? I am not able to run any 3D
modules without the nvidia drivers. Heres copy from the log files:
xconf.org:
Section "Monitor"
Identifier "monitor1"
VendorName "Generic"
ModelName "1280x1024 @ 60 Hz"
HorizSync 31.5-64.3
VertRefresh 50-70
ModeLine "768x576" 50.0 768 832 846 1000 576 590 595 630
ModeLine "768x576" 63.1 768 800 960 1024 576 578 590 616
ModeLine "1680x1050_120" 313.2 1680 1816 2000 2320 1050 1051 1054 1125 -hsync +vsync
ModeLine "1680x1050_100" 256.2 1680 1808 1992 2304 1050 1051 1054 1112 -hsync +vsync
ModeLine "1680x1050_85" 214.5 1680 1800 1984 2288 1050 1051 1054 1103 -hsync +vsync
ModeLine "1680x1050_75" 188.1 1680 1800 1984 2288 1050 1051 1054 1096 -hsync +vsync
ModeLine "1680x1050_60" 147.1 1680 1784 1968 2256 1050 1051 1054 1087 -hsync +vsync
ModeLine "1680x1050_50" 120.2 1680 1776 1952 2224 1050 1051 1054 1081 -hsync +vsync
EndSection
Section "Device"
Identifier "device1"
VendorName "nVidia Corp."
BoardName "NVIDIA GeForce 6800 (generic)"
Driver "nv"
Option "DPMS"
EndSection
Section "Screen"
Identifier "screen1"
Device "device1"
Monitor "monitor1"
DefaultColorDepth 16
Subsection "Display"
Depth 8
Virtual 1280 1024
EndSubsection
Subsection "Display"
Depth 15
Virtual 1280 1024
EndSubsection
Subsection "Display"
Depth 16
Virtual 1280 1024
EndSubsection
Subsection "Display"
Depth 24
Virtual 1280 1024
EndSubsection
EndSection
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder3) Mon May 15 13:23:42 PDT 2006
# File generated by XFdrake.
# **********************************************************************
# Refer to the XF86Config man page for details about the format of
# this file.
# **********************************************************************
Section "ServerLayout"
Identifier "layout1"
InputDevice "Keyboard1" "CoreKeyboard"
InputDevice "Mouse1" "CorePointer"
Screen "screen1"
EndSection
Section "Files"
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Mandrake 6.0 and later now use a font server independent of
# the X server to render fonts.
FontPath "unix/:-1"
EndSection
Section "Module"
Load "dbe" # Double-Buffering Extension
Load "v4l" # Video for Linux
Load "extmod"
Load "type1"
Load "freetype"
Load "glx" # 3D layer
EndSection
Section "ServerFlags"
#DontZap # disable <Crtl><Alt><BS> (server abort)
#DontZoom # disable <Crtl><Alt><KP_+>/<KP_-> (resolution switching)
# allows the server to start up even if the mouse does not work
Option "allowmouseopenfail"
EndSection
Section "InputDevice"
Identifier "Keyboard1"
Driver "keyboard"
Option "XkbModel" "pc101"
Option "XkbLayout" "no"
Option "XkbOptions" "compose:rwin"
EndSection
Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "ExplorerPS/2"
Option "Device" "/dev/mouse"
Option "ZAxisMapping" "6 7"
EndSection
Please help!!
.
- Follow-Ups:
- Re: Trouble with screen resolution in Nvidia drivers
- From: Sybren Stuvel
- Re: Trouble with screen resolution in Nvidia drivers
- Prev by Date: Skjermkluss i Mandriva 2006
- Next by Date: Re: CORBA won't start upon Boot/ReBoot
- Previous by thread: Skjermkluss i Mandriva 2006
- Next by thread: Re: Trouble with screen resolution in Nvidia drivers
- Index(es):
Relevant Pages
|
