Re: kubuntu slow



daewon.yoon@xxxxxxxxx wrote:
I have ram 256MB system. XP was installed on my master hard. I added a
hard as slave and installed kubuntu 6.06.1 desktop. Two hards are
connected with a ide cable.

New kubuntu system is way tooooo slow, (XP isn't that slow). Funny
thing is that the kubuntu on hard is slower than when I boot with live
cd.

After login, a dialog box named examing file progress is shown.
Especially, the window on alt-f2, the edit area isn't active. It takes
minutes for the edit area to become active.

I set the locale in Korean when installing. I tried kdepersonalizer to
kill all the special kde effects. It still is slow. I've also tried
with another hard disk, same result.

What can be the problem?

Thanks in advance.



First suggestion: check if the DMA is enabled for that hard-disk:
sudo hdparm /dev/hdX

and what is the transfer rate (should be some tens of MBytes/sec):
sudo hdparm -t /dev/hdX

Where hdX should be replaced by one of:
hda - if the disk is set as master device on the first IDE connector
hdb - if slave on the first IDE connector
hdc - if master on the second IDE
hdd - if slave on the second IDE

If you have a SATA disk, replace hdX by sdX.

Second suggestion: take a look in the logs (run "dmesg | less"), maybe
you find something.


Mihai
.



Relevant Pages

  • Re: kubuntu slow
    ... connected with a ide cable. ... New kubuntu system is way tooooo slow, ... I set the locale in Korean when installing. ... hda - if the disk is set as master device on the first IDE connector ...
    (alt.os.linux)
  • Re: FreeBSD 4.9: Installation: CD-ROM problems
    ... I bought longer ATA/133 cables and reconfigured the wiring of my IDE ... The mid-cable connector supposedly should go to the slave device, ... Are your HD jumpered as master and slave or are ... CDROM is found. ...
    (freebsd-questions)
  • Re: Problems detecting S-ATA DVD-RW drive with AHCI enabled
    ... Problems detecting S-ATA DVD-RW drive with AHCI enabled ... | Slave: no device present ... The disadvantage of IDE is that my disks run at SATA150, ...
    (freebsd-stable)
  • 40GB Festplatte wird von Linux nicht erkannt, vom Bios schon
    ... Nun habe ich vor kurzem eine 80er Samsung Spinpoint gekauft und ebenfalls ... an den Bus geklemmt, entsprechend war die 80er Slave. ... Probing IDE interface ide0... ...
    (de.comp.os.unix.linux.hardware)
  • Re: SATA & IDE in same computer
    ... >>> with IDE and SATA drives installed. ... The best thing is to remove all drives that could cause ambiguity at ... multiple SCSI HDs or multiple S-ATA HDs. ... >> the jumpers on the IDE drive as slave. ...
    (microsoft.public.windowsxp.general)