Control USB port power on USB hub

From: Harold Chu (toharc_at_hotmail.com)
Date: 04/16/04

  • Next message: DD: "Choosing an embedded linux with driver support" 
    Date: 15 Apr 2004 17:50:46 -0700

    Hi all,

    Do anyone know how to turn on and off the power to a USB hub. I
    understand that the USB 1.1 standard has this feature
    SET_FEATURE/PORT_ENABLE and your USB hardware has the switches.

    We would like to power cycle hardware connected via USB.

    Thanks.

  • Next message: DD: "Choosing an embedded linux with driver support"

    Relevant Pages

    • Re: [linux-usb-devel] ThinkPad T41 - Strange USB 2.0 behaviour
      ... USB Universal Host Controller Interface driver v3.0 ... hub 1-0:1.0: no power switching ... ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC CONNECT ...
      (Linux-Kernel)
    • 2.6.23-rc8-mm2 ACPI Battery Info in /sys but not /proc/acpi
      ... power from the laptop, the scripts immediately send it into hibernate ... # Bus options (PCI etc.) ... # USB Network Adapters ...
      (Linux-Kernel)
    • Re: Cpq Presario 906
      ... which comes w/o the internal FDD. ... Buying a $15 USB FDD should do the trick. ... USB ports, which are occupied already by other devices. ... another source of power. ...
      (comp.sys.laptops)
    • Re: usb question
      ... The USB low power bus mode specifies a maximum of 100 ma per port. ...
      (microsoft.public.windowsxp.basics)
    • Re: usb question
      ... The USB low power bus mode specifies a maximum of 100 ma per port. ...
      (microsoft.public.windowsxp.basics)