Re: Recommand ARM Emulator / Demo board

From: Anton Erasmus (nobody_at_spam.prevent.net)
Date: 10/15/05 

Date: Sat, 15 Oct 2005 22:07:31 +0200

On Thu, 13 Oct 2005 23:01:47 +0800, "Ma, Derek"
<matehsiang@hotmail.com> wrote:

>Hi,
>
>Do you have any recommendation about the ARM Demo Board supporting :
>
>1. Linux or uCLinux
>2. Support OS download without JTAG . I mean just using USB/RS232 for
>firmware/OS upgrade
>3. Stable and easy to use and debug.
>

Look for something based on the Atmel AT91RM9200. It can run full
Linux. I have seen boards based on this device for as little as
US$350.

Regards
  Anton Erasmus

Relevant Pages

  • Re: Recommand ARM Emulator / Demo board
    ... > Do you have any recommendation about the ARM Demo Board supporting: ... Linux or uCLinux ... > firmware/OS upgrade ... It works very fine with a linux kernel 2.4.x, ...
    (comp.os.linux.embedded)
  • Re: Recommand ARM Emulator / Demo board
    ... :> Do you have any recommendation about the ARM Demo Board supporting: ... :> firmware/OS upgrade ... It works very fine with a linux kernel 2.4.x, ... cross-compile tools. ...
    (comp.os.linux.embedded)
  • Re: Impact 8.1 problems=> uClinux rules on MicroBlaze !!!
    ... On the Linux vs windows workstation issue, ... The decision to not support Windows for MicroBlaze uClinux ...
    (comp.arch.fpga)
  • Re: uCLinux on Samsung S3C4510B (ARM7TDMI) based wireless router
    ... serial port or printer port, ... linux or further. ... > router, access point and print server, all at the same time, preferably ... > and openap-ng) options as well as uCLinux. ...
    (comp.os.linux.embedded)
  • Re: best evm for virtex-4 and linux
    ... But that brings up another question: Is it better to go with ucLinux ... > or use the PPC version of linux? ... There are some guides out there on DIY Linux for Xilinx PPC, ... >>shipping with both device and host support drivers for USB ...
    (comp.arch.fpga)