TQM8540

Next message: Simon Clubley: "Re: need a sample code"
Previous message: Alain Mosnier: "Re: need a sample code"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

From: David M (David_at_M.com)
Date: 11/08/05

Date: Tue, 08 Nov 2005 12:19:15 -0500

Hello

I need to flash the U-boot on TQM8540
I went on the Denx website, but I cannot find any "TQM8540" config file
for the BDI2000
Is there such a file ?

Regards,

David

Relevant Pages

Re: Erase a flash from Rommon mode
... ROMMON command vary slightly from unit to unit. ... IGNORE the config file using the confreg command in ROMMON (tell it to ... ROMMON doesn't check compatability. ... either with the flash itself or the flash controller. ...
(comp.dcom.sys.cisco)
Re: config from tftp server
... obtain config file from tftp server. ... Is this a common practice? ... better to save the config to flash and back it up manually on a tftp server ...
(comp.dcom.sys.cisco)
Re: config from tftp server
... obtain config file from tftp server. ... Is this a common practice? ... better to save the config to flash and back it up manually on a tftp server ...
(comp.dcom.sys.cisco)
Re: config from tftp server
... obtain config file from tftp server. ... Is this a common practice? ... better to save the config to flash and back it up manually on a tftp server ...
(comp.dcom.sys.cisco)