Flash file sistem benchmarking
Next message: Rune Christensen: "Re: regarding serial ports"
Date: 16 Nov 2005 07:28:44 GMT
I would be find a linux tool for test the write and read speed of Flash
(NOR or NAND) file sistem.
Have you some ideas ?
Thank You
Best Regards
Stefano
Next message: Rune Christensen: "Re: regarding serial ports"
Relevant Pages
- Re: File system is not working in Retail Version in WinCE 5.0
... I am using the NAND Flash for FAT File System only and I am using the ram ... debug and retail versions after that the loading sequences differs for each. ... As per your suggestion if there is problem in our FMD, for NAND file system ...
(microsoft.public.windowsce.embedded) - Re: NAND Flash drive in CE 6.0
... When the OS mounts the flash filing system, ... Blocks are marked as bad by the manufacturer of the NAND part. ... So, to protect your bootloader from being erased, you need to ensure ... the driver call for sector 0, your shim adds an offset (sufficient to ...
(microsoft.public.windowsce.platbuilder) - Re: NAND Flash drive in CE 6.0
... Does no one out there no anything about CE Flash partitions? ... I am not using EBOOT or any part of the CE OS as my bootloader. ... I assume that you are using FAL-FMD structure to use your NAND. ... the OS into a flash partition. ...
(microsoft.public.windowsce.platbuilder) - RE: Fast, low-CPU, non-moving storage?
... I'd normally go with the NAND implementation as this is generally quite fast. ... implementations, but I would generally have thought them a lot slower than ... using NAND flash due to moving parts, ... I understand that cards with external interfaces such as SD or IDE will ...
(microsoft.public.windowsce.embedded) - Re: NOR flash choosing
... Are you going to be using the rest of your NAND flash for data storage? ... If you're going to store bootloader and OS ... So, our board will have 128M NAND-flash, and NOR-flash chip, with size ...
(microsoft.public.windowsce.platbuilder) |
|
