Bummer, could not run '/etc/init.d/rcS': No such file or directory

- x bits set for this shell script?
SInce Iam new to this embedded linux, could you tell whats that x bits
means, is it exec permission (if so for whom,root?).

- does a shell run?
Iam not clear why does it say /etc/init.d/rcS is not there, while its
definitely there.
I feel shell is not running. I want to just put what I get in minicom
----------------------------------------------------------------------------------------------------------------------------------------
loaded at: 00400000 004C11E4
board data at: 004BE13C 004BE154
relocated to: 00405634 0040564C
zimage at: 00405BF9 004BDD33
avail ram: 004C2000 10000000

Linux/PPC load: console=ttyS0,9600 root=/dev/xsysace/disc0/part2 rw
Uncompressing Linux...done.
Now booting the kernel
Linux version 2.4.26 (root@xxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version
3.4.1) #16 Sat Apr 22 15:19:6Xilinx Virtex-II Pro port (C) 2002
MontaVista Software, Inc. (source@xxxxxxxxxx)
On node 0 totalpages: 65536
zone(0): 65536 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0,9600 root=/dev/xsysace/disc0/part2
rw
Xilinx INTC #0 at 0x41200000 mapped to 0xFDFFE000
Calibrating delay loop... 299.00 BogoMIPS
Memory: 257332k available (1284k kernel code, 380k data, 60k init, 0k
highmem)
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@xxxxxxxxxxxxx)
devfs: boot_options: 0x1
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis
Communications AB.
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with no serial options enabled
ttyS00 at 0xfdfff003 (irq = 29) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
Partition check:
xsysacea: p1 p2
System ACE at 0x41800000 mapped to 0xD1070000, irq=30, 250880KB
eth0: using fifo mode.
eth0: No PHY detected. Assuming a PHY at address 0.
eth0: Xilinx EMAC #0 at 0x40C00000 mapped to 0xD1083000, irq=31
eth0: id 2.0h; block id 7, type 1
SCSI subsystem driver Revision: 1.00
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
VFS: Mounted root (ext2 filesystem).
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
init started: BusyBox v1.1.2 (2006.04.27-03:52+0000) multi-call binary
Starting pid 11, console /dev/console: '/etc/init.d/rcS'
Bummer, could not run '/etc/init.d/rcS': No such file or directory
Bummer, could not run '/etc/init.d/rcS': No such file
ML300 powerpc linux 2.4.21-pre7 E.I.S. edition
(none) login:
-----------------------------------------------------------------------------------------------------------------------------------
Here If I type su or root or whatever it asks password but always says
incorrect login.

- try init=/bin/sh as a kernel parameter. Does it run?

guide me where Iam wrong
Prakash

.

Relevant Pages

  • Re: Why newbies dont RTFM...
    ... Even though I've used Linux before, I've never had to do any ... > BASH BUILTIN COMMANDS ... > last command exited within ... > unless the shell is not exeâ ...
    (comp.os.linux.misc)
  • Why newbies dont RTFM...
    ... Even though I've used Linux before, I've never had to do any ... BASH BUILTIN COMMANDS ... last command exited within ... unless the shell is not exeâ ...
    (comp.os.linux.misc)
  • Re: [opensuse] deleting
    ... during the installation of jre 1.5.0 (according to the install ... i'm learning and having fun with my new toy, the command line interface. ... understand and use linux more efficiently. ... /bin/sh is the Bourne Shell. ...
    (SuSE)
  • Re: [opensuse] Future of SUSE (at home)
    ... BTW if you really want to make your windows stuff "just work" in linux, ... but you persist in saying "it can't be done". ... and you don't always need a shell. ...
    (SuSE)
  • Re: Dude, wheres my network?
    ... > Mac does it too, of course, but most apps in Linux are amenable to the PNC ... SMIT also had an option to show you the low level commands it used so ... I opened a shell and typed man sys-unconfig and there it was. ... > window, ...
    (comp.unix.solaris)