Re: CompactFlash IDE - not recognized




Kapp wrote:
I am converting an old laptop into a digital picture frame. My thought was
to create a small XP (nlite) with the apps I need (slideshow, wireless, vnc)
on a hard drive and then copy it over to a CompactFlash which I would then
replace the laptop harddrive with. I've got a nice tight version on a hard
drive (under 500Mb) ready to put onto CF.

Problem: it doesn't appear that the BIOS I have will recognize the CF as a
drive. I am using a 44-pin CF/IDE adapter I picked up on the internet. Using
a desktop, I confirmed that the adapter works (of course I had to adapt IT
to 40 pin IDE) and actually got the desktop to DOS boot from a formatted CF
(two actually, a 1.0GB Sandisk and a 512MB PNY). Unfortunately, hooking it
into the old laptop (DELL Inspiron 3500) the BIOS doesn't see it and thus
fdisk gives me "no fixed disks present."

Are you running "fdisk" from a hard disk? It's not a good idea to have
the CF sharing cable with a hard disk.


Questions: Anyone have any thoughts on how to get around this? Perhaps a
different adapter? Am I lost for this laptop? I ensured it is the latest
BIOS version (for this inspiron Rev A14). I can proceed with using a hard
drive but the thought of using the CF really appeals to me. One thought I
had as to why the BIOS is not recognizing it was whether it has to do with
the CF card being marked as "removable". However, because it works on the
newer desktop I wonder if this could be it. Other than that, my limited
experience in these matters leaves me clueless!

You can try booting directly on this:

http://cfd.linnix.com/sfide.html

.



Relevant Pages

  • Re: CompactFlash IDE - not recognized
    ... to create a small XP (nlite) with the apps I need (slideshow, wireless, ... replace the laptop harddrive with. ... I am using a 44-pin CF/IDE adapter I picked up on the internet. ... into the old laptop the BIOS doesn't see it and thus ...
    (microsoft.public.windowsxp.embedded)
  • Re: CompactFlash IDE - not recognized
    ... I hate to tell you, but you've posted to a Windows CE, not Windows XP ... replace the laptop harddrive with. ... I am using a 44-pin CF/IDE adapter I picked up on the internet. ... into the old laptop the BIOS doesn't see it and thus ...
    (microsoft.public.windowsce.embedded)
  • Re: MiTAC 3026E Notebook386sx
    ... > Inorganic Battery for atleast 24 hr when adapter supply cord to laptop ... > failure,incorrect memory size setup,bad hard disk controller/drive. ... > GD610/620 Rev C,VGA BIOS Version 3.03 ...
    (comp.sys.laptops)
  • Re: Data Question about adding a second Hard Disk
    ... If I secured the adapter to convert ... >> My laptop stopped working due to a power problem. ... >> Sony I removed the hard disk to preserve the data. ... >> throught the USB port. ...
    (microsoft.public.windowsxp.hardware)
  • MiTAC 3026E Notebook386sx
    ... Inorganic Battery for atleast 24 hr when adapter supply cord to laptop ... GD610/620 Rev C,VGA BIOS Version 3.03 ... Moving System BIOS to Shadow RAM ...
    (comp.sys.laptops)