Re: How to disable console on serial when needed ?



On Dec 27, 1:26 am, "Raymond" <skyfl...@xxxxxxxx> wrote:

I know this way, actually I use it when everything goes right. But it
don't fit for me when I need to debug my program.
By this way , the serial console is gone forever. And I can't get the
output from the program started by rcS, cause they are send to /dev/null.And
I did need these output for debugging sometime.

Raymond

Can't you just use remote syslog for this? It's the way I do.

wimpunk.

.

Relevant Pages

  • Re: Delays imposed by console connection
    ... run-time debug info. ... but that slow serial console is ... What kind of debug messages? ... Kernel or userland? ...
    (comp.os.linux.embedded)
  • Re: Delays imposed by console connection
    ... For example many embedded boards use an RS232 ... serial console, and the default baud on this is usu no more than 19200. ... If the console is used for debug messages, ... the serial console and rely only the telnet connection. ...
    (comp.os.linux.embedded)
  • Re: Delays imposed by console connection
    ... For example many embedded boards use an RS232 ... serial console, and the default baud on this is usu no more than 19200. ... If the console is used for debug messages, ...
    (comp.os.linux.embedded)
  • Debugging server hangs in 7.2-RELEASE
    ... I get no errors on the serial console to indicate any problems, and until a relatively recent upgrade of the kernel, this server was one of my most solid ... ... the serial console doesn't do anything, or, it just prints the message about breaking to the debugger and then hangs there ... ... Is there something else I can do here to debug this? ...
    (freebsd-stable)
  • Re: A bit of good news in May
    ... She's 16 and we know she can't go on forever although she ... seems *so* fit and healthy. ... Vet gave her a good check over and found no ...
    (uk.people.silversurfers)