Re: C/C++ library on AT91RM-EK
- From: "Ulf Samuelsson" <ulf@xxxxxxxxxxxxx>
- Date: Thu, 5 Jul 2007 22:35:29 +0200
"Himanshu Chauhan" <hs.chauhan@xxxxxxxxx> skrev i meddelandet
news:f6j1j3$vmm$1@xxxxxxxxxxx
Hi all,
I am doing a project in which I am using AT91RM-EK board. I am using
2.6.20 kernel with latest patches. Eventually I have to run C++
application on the board. I am currently using GNU C library. The
problem is C++ library is way to big, around 20 MB. How can i reduce its
size? Or is there any other library available that can support massive
C++ application?
I have another problem also. I boot linux from a ram disk. Later after
kernel boots, I mount my SD card as the root file system. How can I
reclaim the memory used by the ramfs? I am sorry I am doing this all for
first time. Any advice or an internet link would be of use.
Thanks in advance!
Regards
--Himanshu
You can expand the flash by using a USB memory stick
You can also build a small board which expands the flash using the
dataflashcard/SD/MMC-Card connector.
You can also try to find the U-Boot patches that were floating around
containing SD-Card fixes.
The SAM9260 (which is very similar to AT91RM9200) EK
has a large amount of NAND flash onboard.
--
Best Regards,
Ulf Samuelsson
This is intended to be my personal opinion which may,
or may not be shared by my employer Atmel Nordic AB
.
- Follow-Ups:
- Re: C/C++ library on AT91RM-EK
- From: Himanshu Chauhan
- Re: C/C++ library on AT91RM-EK
- References:
- C/C++ library on AT91RM-EK
- From: Himanshu Chauhan
- C/C++ library on AT91RM-EK
- Prev by Date: Colilo porting (Please help)
- Next by Date: Re: C/C++ library on AT91RM-EK
- Previous by thread: C/C++ library on AT91RM-EK
- Next by thread: Re: C/C++ library on AT91RM-EK
- Index(es):
Relevant Pages
|
|