Re: Selecting embedded Linux for a new medical device project (LONG)
- From: Michael Schnell <mschnell_at_lumino_dot_de@xxxxxxxxxxx>
- Date: Tue, 09 Oct 2007 10:35:05 +0200
1 ADC channel to measure "knob".
I would use pure digital signals whenever possible. there are incremental coders (with LED positions notifiers when appropriate) that do the "knob"
1 ADC channel to measure temperature over NTC
There are temperature sensor chips with I²C, "one-wire"and other serial digital interfaces
-Michael
.
- References:
- Selecting embedded Linux for a new medical device project (LONG)
- From: DavidK
- Re: Selecting embedded Linux for a new medical device project (LONG)
- From: Ulf Samuelsson
- Selecting embedded Linux for a new medical device project (LONG)
- Prev by Date: Re: booting linux on arm problem
- Next by Date: Re: booting linux on arm problem
- Previous by thread: Re: Selecting embedded Linux for a new medical device project (LONG)
- Next by thread: Linux Target Image Builder (ltib) configuration problem
- Index(es):
