Hi all,
1) Iam working on Philips LPC 2292 controller board, Ethernet
controller is Rtl8019 and Iam testing Rtl8019 driver on linux 2.6
Kernel.I have few Doubts.
2) If at all if a single packet comes and sits in Rx Buffer. Whether
my ethernet controller immediately raises an Interrupt or it wait for
Few seconds or milliseconds for another packets to sit in Rx Buffer
before it raises an Interrupt.
3) If at all If ISR is Executing and if Before copying a packet from
Rx Buffer to local Buffer, if few packet comes to Eth controller,
will respective packets sits in Rx Buffer or packets are Denied by
Ethernet controller.
Re: packet does not get to tcp ip ... I used NdisMIndicateReceivePacket with a packet that is composed from ...NDIS like an ethernet driver.... So when I get a buffer to indicate to ... (microsoft.public.development.device.drivers)
Re: packet does not get to tcp ip ... I used NdisMIndicateReceivePacket with a packet that is composed from ...NDIS like an ethernet driver.... So when I get a buffer to indicate to ... (microsoft.public.development.device.drivers)
Re: UDP socket ...Ethernet flow control is ON. ...receiver socket buffer will get full and then ethernet flow control ... Will IP layer drop this packet without error return? ... When an ethernet card receives a pause, and assuming it is configured to ... (comp.os.linux.networking)
question on Ethernet Devicedriver ... Iam working on Philips LPC 2292 controller board, Ethernet... If at all if a single packet comes and sits in Rx Buffer. ... Few seconds or milliseconds for another packets to sit in Rx Buffer... (comp.os.linux.embedded)
question on Ethernet Devicedriver ... Iam working on Philips LPC 2292 controller board, Ethernet... If at all if a single packet comes and sits in Rx Buffer. ... Few seconds or milliseconds for another packets to sit in Rx Buffer... (comp.os.linux.development.system)
