Re: Beginning Embedded Development

Pvt Ryan schreef:
Hi,

I will admit it straight off I am a n00b, I have no experience in
embedded development what so ever. However I want to learn, if I
google it all i get is a load of comerical links that are irrelevent,
so I am asking here in the hope someone will point me in the right
direction.

The required specs of the device I want to endup with:
1x ethernet
1x(or preferably more) USB port (A-type receptacle)
1x Low end cpu 100Hhz-200Mhz
~64Mb of flash (more is better)
as much ram as feasible

http://www.ethernut.de/en/hardware/index.html
The Ethernut could be for you!

Regards,
Edwin
.

Relevant Pages

  • Re: Beginning Embedded Development
    ... I will admit it straight off I am a n00b, ... embedded development what so ever. ...
    (comp.os.linux.embedded)
  • Beginning Embedded Development
    ... I will admit it straight off I am a n00b, ... embedded development what so ever. ...
    (comp.os.linux.embedded)
  • Re: Beginning Embedded Development
    ... I will admit it straight off I am a n00b, ... embedded development what so ever. ...
    (comp.os.linux.embedded)
  • Re: cant locate instructions for configuring older airport extreme
    ... straight through or cross cable. ... The other four wires are not needed ... If at least one device involved can auto-detect then 10Base-T or ... 100Base-TX Ethernet will work with either straight through or cross-over ...
    (comp.sys.mac.comm)
  • Re: Networking an iMac
    ... Tuddenham) said: ... connect it straight to my existing Ethernet and was told that I could. ... Did you specifically ask about AppleSharing to 8.x Macs? ...
    (uk.comp.sys.mac)