Re: Remove pcmcia card, system hangs

From: Jayson Garrell (kyi_at_kyi.sytes.net)
Date: 09/04/03


Date: Thu, 04 Sep 2003 11:48:55 -0700

hseaver@nospamcybershamanix.com wrote:

> When I remove the card, the whole
> system hangs. Totally -- can't log in from the network, if top is running
> it stops, etc. Have to do a hard reboot. I've tried installing the latest
> pcmcia-cs. Otherwise pcmcia works fine, it correctly ID's the flash card I
> put in, reads it, writes to it.
>
> So I can can then mount /dev/hdc1 on /mnt/temp, read it, write to it,
> then
> unmount it, pull out the card and bam! the machine locks up.

For some reason my laptop has been doing the same thing. Here is a simple
work around to the problem, for now.

1) insert pcmcia card and do what ever you are going to do

2) before removeing the card issue the following command

cardctl eject (that will eject all of the card slots)

3) now physicaly remove the card, no lock ups ;-)

Jayson Garrell



Relevant Pages

  • Re: XXX_Init only being called once
    ... > My stream interface driver has been stripped right back to try to solve ... > I plug my card in the first time. ... > There are two new active keys in the registry PCMCIA and myDriver. ... > No entry points are called in my driver. ...
    (microsoft.public.windowsce.platbuilder)
  • Re: PCMCIA I82365 issue
    ... PC Card socket driver and PC Card service has to be loaded at phase one. ... After I insert the PCMCIA CF card in the PCMCIA slot the system ... ISA PCCARD: ThreadRun Intrstatus bCardStatusChange = 0x8, ... 0x83f29800: PCCARD: PCMCIA memory window created ...
    (microsoft.public.windowsce.platbuilder)
  • Re: ewf flash partitioning
    ... I am using PCMCIA ATA flash cards, not CF although I understand they're the ... windows under the 'Volumes' tab of the disk properties the 'Partition Style' ... success with the latest SanDisk card? ...
    (microsoft.public.windowsxp.embedded)
  • Re: CF card detection in WinCE 5.0
    ... We have taken the first or second PCMCIA slot from a Mainstone-type ... board and made that into a CF card slot previously, ... I've been trying to use a Compact Flash for some time, ... operation (no ATAPI driver, ...
    (microsoft.public.windowsce.platbuilder)
  • Re: IBM ps2 Micro Channel Soundblaster
    ... > Wireless ethernet via the PCMCIA Adapter/A comes to mind,;). ... that Olicom card is really an awful design. ... Can you tell my selection of PCMCIA cards is not the best? ... > the same modification, ie, the ability to find the adapter. ...
    (comp.sys.ibm.ps2.hardware)