Redhat 9 with Intel Corp.|82801EB AC'97 Audio / SOUNDMAX Sound card

From: andy (anandkapoor_at_sunguru.com)
Date: 10/22/03

  • Next message: Malte Schuenemann: "DVD burner and USB2.0-PCMCIA converter" 
    Date: 22 Oct 2003 04:17:08 -0700

    I have just installed RH 9 on a HP Compaq D530 ultra slim desktop.
    (The box is a dual boot with WinXp) . The box doesnt like my soundcard
    at all .
    My Output of lsmod is :
    Module Size Used by Not tainted
    i830 74336 1
    agpgart 48128 12 (autoclean)
    autofs 13268 0 (autoclean) (unused)
    bcm5700 104264 1
    nls_cp437 5148 1 (autoclean)
    vfat 13004 1 (autoclean)
    fat 38808 0 (autoclean) [vfat]
    nls_iso8859-1 3516 3 (autoclean)
    ntfs 59008 2 (autoclean)
    keybdev 2976 0 (unused)
    mousedev 5556 1
    hid 22244 0 (unused)
    input 5856 0 [keybdev mousedev hid]
    usb-uhci 26412 0 (unused)
    ehci-hcd 20072 0 (unused)
    usbcore 79040 1 [hid usb-uhci ehci-hcd]
    ext3 70784 1
    jbd 51924 1 [ext3]

    When I run sndconfig it recognises the card as Intel Corp.|82801EB
    AC'97 Audio, but craps out saying that it is not supported. WinXP
    works well with the card (recognises it as SoundMax).

    Tried alsa . but it did'nt work (i reckon i did not do it right . )
    Does Somebody has any idea's ? I am at my wits end .

    I am not even sure wether i looked up at the right card at alsa . I am
    also attaching the output of my dmesg. Pls Help !

    ***********************DMESG**************************************************
    Linux version 2.4.20-20.9 (bhcompile@stripples.devel.redhat.com) (gcc
    version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #1 Mon
    Aug 18 11:45:58 EDT 2003
    BIOS-provided physical RAM map:
     BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
     BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
     BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
     BIOS-e820: 0000000000100000 - 000000000f7f0000 (usable)
     BIOS-e820: 000000000f7f0000 - 0000000010000000 (reserved)
     BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
    0MB HIGHMEM available.
    247MB LOWMEM available.
    On node 0 totalpages: 63472
    zone(0): 4096 pages.
    zone(1): 59376 pages.
    zone(2): 0 pages.
    Kernel command line: ro root=LABEL=/
    Initializing CPU#0
    Detected 2394.181 MHz processor.
    Console: colour VGA+ 80x25
    Calibrating delay loop... 4771.02 BogoMIPS
    Memory: 244908k/253888k available (1358k kernel code, 6612k reserved,
    1004k data, 132k init, 0k highmem)
    Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
    Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
    Mount cache hash table entries: 512 (order: 0, 4096 bytes)
    Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes)
    Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
    CPU: Trace cache: 12K uops, L1 D cache: 8K
    CPU: L2 cache: 512K
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#0.
    CPU: After generic, caps: bfebfbff 00000000 00000000 00000000
    CPU: Common caps: bfebfbff 00000000 00000000 00000000
    CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 09
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Checking 'hlt' instruction... OK.
    POSIX conformance testing by UNIFIX
    mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
    mtrr: detected mtrr type: Intel
    PCI: PCI BIOS revision 2.20 entry at 0xec548, last bus=5
    PCI: Using configuration type 1
    PCI: Probing PCI hardware
    PCI: Ignoring BAR0-3 of IDE controller 00:1f.1
    Transparent bridge - Intel Corp. 82801BA/CA/DB PCI Bridge
    PCI: Using IRQ router default [8086/24d0] at 00:1f.0
    isapnp: Scanning for PnP cards...
    isapnp: No Plug & Play device found
    Linux NET4.0 for Linux 2.4
    Based upon Swansea University Computer Society NET3.039
    Initializing RT netlink socket
    apm: BIOS not found.
    Starting kswapd
    VFS: Disk quotas vdquot_6.5.1
    pty: 2048 Unix98 ptys configured
    Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT
    SHARE_IRQ SERIAL_PCI ISAPNP enabled
    Real Time Clock Driver v1.10e
    floppy0: no floppy controllers found
    NET4: Frame Diverter 0.46
    RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
    Uniform Multi-Platform E-IDE driver Revision: 7.00beta3-.2.4
    ide: Assuming 33MHz system bus speed for PIO modes; override with
    idebus=xx
    ICH5: IDE controller at PCI slot 00:1f.1
    PCI: Enabling device 00:1f.1 (0005 -> 0007)
    ICH5: chipset revision 2
    ICH5: not 100% native mode: will probe irqs later
        ide0: BM-DMA at 0x14c0-0x14c7, BIOS settings: hda:DMA, hdb:pio
        ide1: BM-DMA at 0x14c8-0x14cf, BIOS settings: hdc:pio, hdd:pio
    ICH5-SATA: IDE controller at PCI slot 00:1f.2
    ICH5-SATA: chipset revision 2
    ICH5-SATA: 100% native mode on irq 11
        ide2: BM-DMA at 0x14d0-0x14d7, BIOS settings: hde:pio, hdf:pio
        ide3: BM-DMA at 0x14d8-0x14df, BIOS settings: hdg:pio, hdh:pio
    hda: ST340014A, ATA DISK drive
    blk: queue c03cdfe0, I/O limit 4095Mb (mask 0xffffffff)
    ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
    hda: attached ide-disk driver.
    hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
    hda: task_no_data_intr: error=0x04 { DriveStatusError }
    hda: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=5169/240/63,
    UDMA(100)
    ide-floppy driver 0.99.newide
    Partition check:
     hda: hda1 hda2 < hda5 hda6 > hda3 hda4
    ide-floppy driver 0.99.newide
    md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
    md: Autodetecting RAID arrays.
    md: autorun ...
    md: ... autorun DONE.
    NET4: Linux TCP/IP 1.0 for NET4.0
    IP Protocols: ICMP, UDP, TCP, IGMP
    IP: routing cache hash table of 2048 buckets, 16Kbytes
    TCP: Hash tables configured (established 16384 bind 32768)
    Linux IP multicast router 0.06 plus PIM-SM
    NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
    RAMDISK: Compressed image found at block 0
    Freeing initrd memory: 146k freed
    VFS: Mounted root (ext2 filesystem).
    Journalled Block Device driver loaded
    kjournald starting. Commit interval 5 seconds
    EXT3-fs: mounted filesystem with ordered data mode.
    Freeing unused kernel memory: 132k freed
    usb.c: registered new driver usbdevfs
    usb.c: registered new driver hub
    PCI: Setting latency timer of device 00:1d.7 to 64
    ehci-hcd 00:1d.7: PCI device 8086:24dd (Intel Corp.)
    ehci-hcd 00:1d.7: irq 3, pci mem d0049000
    usb.c: new USB bus registered, assigned bus number 1
    ehci-hcd 00:1d.7: enabled 64bit PCI DMA
    PCI: 00:1d.7 PCI cache line size set incorrectly (0 bytes) by BIOS/FW.
    PCI: 00:1d.7 PCI cache line size corrected to 128.
    ehci-hcd 00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2003-Jan-22
    hub.c: USB hub found
    hub.c: 8 ports detected
    usb-uhci.c: $Revision: 1.275 $ time 11:55:13 Aug 18 2003
    usb-uhci.c: High bandwidth mode enabled
    PCI: Setting latency timer of device 00:1d.0 to 64
    usb-uhci.c: USB UHCI at I/O 0x1440, IRQ 5
    usb-uhci.c: Detected 2 ports
    usb.c: new USB bus registered, assigned bus number 2
    hub.c: USB hub found
    hub.c: 2 ports detected
    PCI: Setting latency timer of device 00:1d.1 to 64
    usb-uhci.c: USB UHCI at I/O 0x1460, IRQ 10
    usb-uhci.c: Detected 2 ports
    usb.c: new USB bus registered, assigned bus number 3
    hub.c: USB hub found
    hub.c: 2 ports detected
    PCI: Setting latency timer of device 00:1d.2 to 64
    usb-uhci.c: USB UHCI at I/O 0x1480, IRQ 11
    usb-uhci.c: Detected 2 ports
    usb.c: new USB bus registered, assigned bus number 4
    hub.c: USB hub found
    hub.c: 2 ports detected
    usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
    usb.c: registered new driver hiddev
    usb.c: registered new driver hid
    hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
    hid-core.c: USB HID support drivers
    mice: PS/2 mouse device common for all mice
    EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,3), internal journal
    Adding Swap: 521632k swap-space (priority -1)
    hub.c: port 7 over-current change
    hub.c: new USB device 00:1d.1-1, assigned address 2
    input0: USB HID v1.10 Keyboard [CHICONY Compaq USB Keyboard] on
    usb3:2.0
    usb-uhci.c: interrupt, status 2, frame# 1545
    input1,hiddev0: USB HID v1.10 Pointer [CHICONY Compaq USB Keyboard] on
    usb3:2.1
    hub.c: new USB device 00:1d.0-2, assigned address 2
    input2: USB HID v1.10 Mouse [Logitech USB Mouse] on usb2:2.0
    usb-uhci.c: ENXIO 84000280, flags 0, urb ceae1380, burb ceae1480
    usbdevfs: USBDEVFS_CONTROL failed dev 2 rqt 128 rq 6 len 59 ret -6
    usb-uhci.c: ENXIO 84000280, flags 0, urb ceae1380, burb ceae1480
    usbdevfs: USBDEVFS_CONTROL failed dev 2 rqt 128 rq 6 len 18 ret -6
    usb-uhci.c: ENXIO 84000280, flags 0, urb ceae1380, burb ceae1480
    usbdevfs: USBDEVFS_CONTROL failed dev 2 rqt 128 rq 6 len 18 ret -6
    NTFS driver v1.1.22 [Flags: R/O MODULE]
    ip_tables: (C) 2000-2002 Netfilter core team
    Broadcom Gigabit Ethernet Driver bcm5700 with Broadcom NIC Extension
    (NICE) ver. 7.0.0 (08/14/03)
    divert: allocating divert_blk for eth0
    eth0: Broadcom NetXtreme Gigabit Ethernet for hp found at mem
    f8500000, IRQ 3, node addr 0040ca5d225f
    eth0: Broadcom BCM5705 Integrated Copper transceiver found
    eth0: Scatter-gather ON, 64-bit DMA ON, Tx Checksum ON, Rx Checksum
    ON, 802.1Q VLAN ON, NAPI ON
    usb-uhci.c: ENXIO 84000280, flags 0, urb ceae1380, burb ceae1480
    usbdevfs: USBDEVFS_CONTROL failed dev 2 rqt 128 rq 6 len 59 ret -6
    usb-uhci.c: ENXIO 84000280, flags 0, urb ceae1380, burb ceae1480
    usbdevfs: USBDEVFS_CONTROL failed dev 2 rqt 128 rq 6 len 18 ret -6
    usb-uhci.c: ENXIO 84000280, flags 0, urb ceae1380, burb ceae1480
    usbdevfs: USBDEVFS_CONTROL failed dev 2 rqt 128 rq 6 len 18 ret -6
    NTFS driver v1.1.22 [Flags: R/O MODULE]
    ip_tables: (C) 2000-2002 Netfilter core team
    Broadcom Gigabit Ethernet Driver bcm5700 with Broadcom NIC Extension
    (NICE) ver. 7.0.0 (08/14/03)
    divert: allocating divert_blk for eth0
    eth0: Broadcom NetXtreme Gigabit Ethernet for hp found at mem
    f8500000, IRQ 3, node addr 0040ca5d225f
    eth0: Broadcom BCM5705 Integrated Copper transceiver found
    eth0: Scatter-gather ON, 64-bit DMA ON, Tx Checksum ON, Rx Checksum
    ON, 802.1Q VLAN ON, NAPI ON
    ip_tables: (C) 2000-2002 Netfilter core team
    bcm5700: eth0 NIC Link is UP, 100 Mbps full duplex
    Linux agpgart interface v0.99 (c) Jeff Hartmann
    agpgart: Maximum main memory to use for agp memory: 196M
    agpgart: Detected an Intel(R) 865G Chipset.
    agpgart: Detected 8060K stolen memory.
    agpgart: AGP aperture is 128M @ 0xf0000000
    memory : ce6bd700
    memory : ce6bd780
    memory : ce6bd800
    memory : ce6bd880
    [drm] AGP 0.99 on Intel i810 @ 0xf0000000 128MB
    [drm] Initialized i830 1.3.2 20021108 on minor 0
    mtrr: base(0xf0000000) is not aligned on a size(0x300000) boundary
    memory : ce6bd980
    memory : ce6bda00
    memory : ce6bda80
    memory : ce6bdb00
    memory : ce6bdb80

  • Next message: Malte Schuenemann: "DVD burner and USB2.0-PCMCIA converter"

    Relevant Pages