cdrecord error copying knoppix 3.3

goog32_at_surveypoint.com
Date: 12/30/03 

Date: Mon, 29 Dec 2003 18:52:27 -0600

In trying to make an archival copy of a Knoppix 3.3 CD that I purchased
from the internet, I'm getting a strange error during the fixation
stage. I think the error is not critical in that the CD-ROM verifies
100% using the cmp command. (I used "dd if=/dev/cdrom of=knoppix.iso"
to copy the original CD prior to burning.) The CD appears to boot and
work fine. But I'm a bit concerned there may be a hidden problem,
because the Knoppix image stuffs uses about the full 700mb (byte count
is 733960192).

Should I be worried? The CD burner is a Cendyne 32x12x48x (sorry, don't
know the OEM). Yes, I'm using a regular 700mb CDR disk, not a 650mb
CDRW. System is running Redhat 9.0, cdrecord-2.0-11.9.1.

Here's the output from cdrecord. I use the command "cdrecord -v -eject
speed=8 dev=0,0,0 knoppix.iso"):

Turning BURN-Free off
Performing OPC...
Starting new track at sector: 0
Track 01: 699 of 699 MB written (fifo 100%) [buf 95%] 8.9x.
Track 01: Total bytes read/written: 733960192/733960192 (358379 sectors).
cdrecord: Input/output error. flush cache: scsi sendcmd: no error
CDB: 35 00 00 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 03 00 00 00 00 0A 00 00 00 00 73 04 00 00
Sense Key: 0x3 Medium Error, Segment 0
Sense Code: 0x73 Qual 0x04 (program memory area update failure) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 46.248s timeout 120s
Trouble flushing the cache
Writing time: 611.494s
Average write speed 7.8x.
Min drive buffer fill was 95%
Fixating...
cdrecord: Input/output error. close track/session: scsi sendcmd: no error
CDB: 5B 00 02 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 03 00 00 00 00 0A 00 00 00 00 02 00 00 00
Sense Key: 0x3 Medium Error, Segment 0
Sense Code: 0x02 Qual 0x00 (no seek complete) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 48.177s timeout 480s
Fixating time: 48.179s
cdrecord: fifo had 11561 puts and 11561 gets.
cdrecord: fifo was 0 times empty and 11448 times full, min fill was 93%.

Relevant Pages

  • Re: cdrecord error copying knoppix 3.3
    ... got errors during fixation. ... reported by cdrecord with overburning is *smaller* than the total I got ... David Efflandt wrote: ... >>In trying to make an archival copy of a Knoppix 3.3 CD that I purchased ...
    (comp.os.linux.hardware)
  • cdrecord issues since 2.6 move
    ... Linux sg driver version: 3.5.27 ... Waiting for reader process to fill input buffer ... ... Sense Key: ... cdrecord: Please properly read the error message above. ...
    (Debian-User)
  • Probs burning CDs
    ... WARNING: ... The author of cdrecord should not be bothered with problems in ... Waiting for reader process to fill input buffer ... ... Sense Key: ...
    (alt.os.linux.suse)
  • CD-RW dosent blank (was Re: CD burning doesnt work - scsi emulation?..)
    ... I've tried to blank CD-RW but no joy. ... Here's the out put of my attempts from cdrecord, ... cdrecord: Input/output error. ... Sense Key: ...
    (Fedora)
  • Plextor Plexwriter 12/10/32S SCSI problem
    ... I have a plexwriter 12/10/32S scsi model, ... I didn't have not even one coaster. ... Sense Key: ... cdrecord: A write error occured. ...
    (comp.os.linux.hardware)