Debian 3.0r1 with Xircom 10/100 + modem card

From: poco (poco3000_at_yahoo.com)
Date: 01/31/04 

Date: Fri, 30 Jan 2004 22:48:26 -0500

On a laptop, Dell Latitude cpi, after installing Debian 3.0r1, the network
card is a Xircom Realport Cardbus Ethernet + Modem (has an rj45 port and
rj11 port on the same card).
eth0 shows as being up, but when I look at the output of 'pcmcia restart' ,
it looks like it is only seeing a serial port, which I am understanding as
seeing the modem.
What I get is:
tulip_attach(device 23:00.0)
tulip.c:v0.91g-ppc
eth0:Xircom Cardbus Adapter (DEC 21143 compatible mode) rev 3 at 0x200,
00:10:a4:98:1f::f2, irq 11
eth0: MII transciever #0 config 3100 status 7809 advertising 01e1
serial_attach(device 23:00.0)
tty00 at 0x0200 (irq = 11 ) is a 16550a

Am I right in thinking that it is seeing eth0 as the modem ? And not seeing
the network port ? And does anyone know what I would do to fix it ?
Thanks

Relevant Pages

  • Re: Need a router recommendation please
    ... The KR-1 accepts wireless PCMCIA cards. ... My modem is not PCMCIA. ... I can use it in the USB port in my workstation as well as the USB port ... The Kyocera KR-1 router will accept a Verizon Wireless PC Card ...
    (rec.outdoors.rv-travel)
  • Summary: Cluster on Ultra10
    ... 10/100 Mbs ethernet port and 1 x Ultra ... port on one card). ... for failover if you have a redundant network. ... Check with your local Sun support office if under maint. ...
    (SunManagers)
  • Re: How do I create a Wired & Wireless Network
    ... to it (don't connect either to your broadband modem). ... go into Network setup and DISABLE the DHCP ... then go into the wireless setup and specify a new SSID name ... I believe the modem is also a router, it has 1 port for the dsl ...
    (microsoft.public.windowsxp.network_web)
  • Re: Setting hardware flow control on serial port
    ... configure and check HW flow control. ... In my modem initialization string I ... Turning on hardware flow control on the port is important in getting the modem to work properly and for best performance. ... Using the hardwired device file with hardware flow control, you should be able to communicate with the modem with the kermit ...
    (comp.sys.hp.hpux)
  • Re: Upgrade XP Home to Pro and lose COM ports
    ... Pro and then I tried to use the modem ... but there are no other processes using the com port ... under "other devices" a Network Controller listed. ... Wireless PCMCIA card. ...
    (microsoft.public.windowsxp.general)