Crash when trying to mount CD Fedora Core 1

From: Michael Christopher Woods (mc_woods_at_hotmail.com)
Date: 03/11/04 

Date: Thu, 11 Mar 2004 14:30:35 +0000

Hello,

I have Fedora Core 1 installed on my machine. I have 2 hard drives,
1 cdrw (as cdrom), and a cdrom drive.

The cdrw can mount and read disk's fine. I stick a CD in, it automounts
and appears on my desktop.

But if I stick a data cd into the second cdrom (only) drive the entire
system hands. X freezes, nothing responds. Lights on CD go on and stay
on forever. Only way out is to do a hardware reset.

I know the CDROM was working because I used both drives when
installing Fedora.

I can stick in an audio cd, and the cd-ripping tools with ship with
fedora pick up all the tracks on the CD. - I just can play the disk.

I'm really stuck with this one.

I did have to manually edit my fstab to get fedora to mount my second
hard drive. Could I have done something here to cause this problem.

So far I've tried removing all CD entries from fstab and allowing
the system to recreate them. I then tried removing the hard_drive
entry I added to see if it would mount a disk. - On both occasions
I got the same result.

I've included the contents of my fstab below, and also the result
of dmesg.

Thanks,
Michael Woods

fstab-------------------------------------------------------------
LABEL=/ / ext3 defaults 1 1
LABEL=/boot /boot ext3 defaults 1 2
/dev/hdb3 /mnt/hard_drive reiserfs rw,users,hash=detect 1 2
none /dev/pts devpts gid=5,mode=620 0 0
none /proc proc defaults 0 0
none /dev/shm tmpfs defaults 0 0
/dev/hdb2 swap swap defaults 0 0
/dev/hda3 swap swap defaults 0 0
/dev/fd0 /mnt/floppy auto noauto,owner,kudzu 0 0
/dev/sda4 /mnt/zip auto noauto,owner,kudzu 0 0
/dev/cdrom1 /mnt/cdrom1 udf,iso9660 noauto,owner,kudzu,ro 0 0
/dev/cdrom /mnt/cdrom udf,iso9660 noauto,owner,kudzu,ro 0 0

dmesg-------------------------------------------------------------
Linux version 2.4.22-1.2115.nptl (bhcompile@daffy.perf.redhat.com) (gcc version 3.2.3 20030422 (Red Hat Linux 3.2.3-6)) #1 Wed Oct 29 15:42:51 EST 2003
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
 BIOS-e820: 000000000fff0000 - 000000000fff3000 (ACPI NVS)
 BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI data)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
255MB LOWMEM available.
ACPI: have wakeup address 0xc0001000
On node 0 totalpages: 65520
zone(0): 4096 pages.
zone(1): 61424 pages.
zone(2): 0 pages.
ACPI: RSDP (v000 GBT ) @ 0x000f68d0
ACPI: RSDT (v001 GBT AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0fff3000
ACPI: FADT (v001 GBT AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0fff3040
ACPI: DSDT (v001 GBT AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
Kernel command line: ro root=LABEL=/ hdc=ide-scsi rhgb
ide_setup: hdc=ide-scsi
Initializing CPU#0
Detected 451.032 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 897.84 BogoMIPS
Memory: 255212k/262080k available (1503k kernel code, 6480k reserved, 1110k data, 136k init, 0k highmem)
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
CPU serial number disabled.
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0383f9ff 00000000 00000000 00000000
CPU: Common caps: 0383f9ff 00000000 00000000 00000000
CPU: Intel Pentium III (Katmai) stepping 02
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
ACPI: Subsystem revision 20031002
ACPI: Interpreter disabled.
PCI: PCI BIOS revision 2.10 entry at 0xfb390, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router PIIX/ICH [8086/7110] at 00:07.0
Limiting direct PCI/PCI transfers.
isapnp: Scanning for PnP cards...
isapnp: Card 'Genius LAN GE2000III Series Card'
isapnp: 1 Plug & Play card detected total
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16)
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
pty: 2048 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS0 at 0x03f8 (irq = 4) is a 16550A
ttyS1 at 0x02f8 (irq = 3) is a 16550A
PCI: Found IRQ 10 for device 00:0b.0
PCI: Sharing IRQ 10 with 00:07.2
Real Time Clock Driver v1.10e
NET4: Frame Diverter 0.46
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller at PCI slot 00:07.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
hda: C/H/S=19158/16/255 from BIOS ignored
hda: ST340810A, ATA DISK drive
hdb: ST310240A, ATA DISK drive
blk: queue c040cfc0, I/O limit 4095Mb (mask 0xffffffff)
blk: queue c040d100, I/O limit 4095Mb (mask 0xffffffff)
hdc: HL-DT-ST GCE-8480B, ATAPI CD/DVD-ROM drive
hdd: SAMSUNG CD-ROM SCR-3232 VH102, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=77545/16/63, UDMA(33)
hdb: attached ide-disk driver.
hdb: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
hdb: task_no_data_intr: error=0x04 { DriveStatusError }
hdb: 20005650 sectors (10243 MB) w/128KiB Cache, CHS=19846/16/63, UDMA(33)
Partition check:
 hda: [PTBL] [4865/255/63] hda1 hda2 hda3
 hdb: [PTBL] [1245/255/63] hdb1 hdb2 hdb3
ide: late registration of driver.
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 159k freed
VFS: Mounted root (ext2 filesystem).
Journalled Block Device driver loaded
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: ide0(3,2): orphan cleanup on readonly fs
ext3_orphan_cleanup: deleting unreferenced inode 2584197
EXT3-fs: ide0(3,2): 1 orphan inode deleted
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 136k freed
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 15:50:32 Oct 29 2003
usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 10 for device 00:07.2
PCI: Sharing IRQ 10 with 00:0b.0
usb-uhci.c: USB UHCI at I/O 0xe000, IRQ 10
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
hub.c: new USB device 00:07.2-2, assigned address 2
usb.c: USB device 2 (vend/prod 0x59b/0x30) is not claimed by any active driver.
SCSI subsystem driver Revision: 1.00
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
usb-uhci.c: interrupt, status 2, frame# 87
usb_control/bulk_msg: timeout
scsi0 : SCSI emulation for USB Mass Storage devices
  Vendor: IOMEGA Model: ZIP 250 Rev: 31.G
  Type: Direct-Access ANSI SCSI revision: 02
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 2
USB Mass Storage support registered.
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2), internal journal
Adding Swap: 265064k swap-space (priority -1)
Adding Swap: 522104k swap-space (priority -2)
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
hdd: attached ide-cdrom driver.
hdd: ATAPI 32X CD-ROM drive, 128kB Cache, DMA
Uniform CD-ROM driver Revision: 3.12
hdc: attached ide-scsi driver.
scsi1 : SCSI host adapter emulation for IDE ATAPI devices
  Vendor: HL-DT-ST Model: CD-RW GCE-8480B Rev: 1.03
  Type: CD-ROM ANSI SCSI revision: 02
IA-32 Microcode Update Driver: v1.11 <tigran@veritas.com>
microcode: CPU0 no microcode found! (sig=672, pflags=1)
parport0: PC-style at 0x378 [PCSPP,TRISTATE]
Attached scsi CD-ROM sr0 at scsi1, channel 0, id 0, lun 0
sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
SCSI device sda: 489532 512-byte hdwr sectors (251 MB)
usb-uhci.c: interrupt, status 3, frame# 123
sda: Write Protect is off
 sda: sda4
inserting floppy driver for 2.4.22-1.2115.nptl
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
divert: not allocating divert_blk for non-ethernet device eth0
ne.c: ISAPnP reports Generic PNP at i/o 0x280, irq 5.
ne.c:v1.10 9/23/94 Donald Becker (becker@scyld.com)
Last modified Nov 1, 2000 by Paul Gortmaker
NE*000 ethercard probe at 0x280: 00 c0 df af 35 55
eth0: NE2000 found at 0x280, using IRQ 5.
divert: not allocating divert_blk for non-ethernet device eth1
divert: no divert_blk to free, eth1 not ethernet
divert: no divert_blk to free, eth0 not ethernet
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (2047 buckets, 16376 max) - 292 bytes per conntrack
divert: not allocating divert_blk for non-ethernet device eth0
ne.c: ISAPnP reports Generic PNP at i/o 0x280, irq 5.
ne.c:v1.10 9/23/94 Donald Becker (becker@scyld.com)
Last modified Nov 1, 2000 by Paul Gortmaker
NE*000 ethercard probe at 0x280: 00 c0 df af 35 55
eth0: NE2000 found at 0x280, using IRQ 5.
divert: not allocating divert_blk for non-ethernet device eth1
divert: no divert_blk to free, eth1 not ethernet
parport0: PC-style at 0x378 [PCSPP,TRISTATE]
lp0: using parport0 (polling).
lp0: console ready
0: nvidia: loading NVIDIA Linux x86 nvidia.o Kernel Module 1.0-5328 Wed Dec 17 13:54:51 PST 2003
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 203M
agpgart: Detected Intel 440BX chipset
agpgart: AGP aperture is 64M @ 0xe0000000
Trident 4DWave/SiS 7018/ALi 5451,Tvia CyberPro 5050 PCI Audio, version 0.14.10h, 15:50:43 Oct 29 2003
PCI: Found IRQ 9 for device 00:0a.0
trident: Trident 4DWave DX found at IO 0xe400, IRQ 9
ac97_codec: AC97 Audio codec, id: AKM1 (Asahi Kasei AK4542)
PCI: Found IRQ 9 for device 00:0a.0
gameport0: Trident Microsystems 4DWave DX at pci00:0a.0 speed 2294 kHz
reiserfs: found format "3.6" with standard journal
reiserfs: checking transaction log (device ide0(3,67)) ...
for (ide0(3,67))
ide0(3,67):Using r5 hash to sort names

Relevant Pages