USB card reader - how do I mount it?

From: John Stolz (china-rider_at_wanadoo.fr)
Date: 06/17/04 

Date: Thu, 17 Jun 2004 13:04:32 +0200

I've been messing with this for days now without success, I'd hoped it
would work automagically in Mandrake 9.2, but....
The card reader is a PNY multi card reader (4 types)

lsusb reports:
Bus 005 Device 001: ID 0000:0000
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 003 Device 002: ID 046d:c501 Logitech, Inc. Cordless Mouse Receiver
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
Bus 001 Device 002: ID 05e3:0604 Genesys Logic, Inc.
Bus 001 Device 006: ID 03eb:3301 Atmel Corp. 4-port Hub
Bus 001 Device 009: ID 0aec:5010 Neodio Technologies Corp. ND5010 Card Reader
Bus 001 Device 010: ID 07c4:b00b Datafab Systems, Inc.
I presume device 009 is the one I'm interested in.

'cat /proc/scsi/scsi' reveals:

Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
  Vendor: SAMSUNG Model: CD-R/RW SW-216B Rev: Q001
  Type: CD-ROM ANSI SCSI revision: 02
Host: scsi2 Channel: 00 Id: 00 Lun: 00
  Vendor: OEI-USB Model: Memory Stick Rev: 0109
  Type: Direct-Access ANSI SCSI revision: 02
Which looks promising because the reader has a memory stick slot (but 3
others as well - where are they?)

/var/log/messages has lots of messages of the form:
Jun 17 12:53:41 uranus kernel: usb-uhci.c: interrupt, status 3, frame# 43
Jun 17 12:53:42 uranus kernel: sda: Unit Not Ready, sense:
Jun 17 12:53:42 uranus kernel: Info fld=0x0, Current 00:00: sense key Not Ready
Jun 17 12:53:42 uranus kernel: Additional sense indicates Medium not
present

/var/log/dmesg contains:
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
scsi1 : SCSI emulation for USB Mass Storage devices
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 4
usb-uhci.c: interrupt, status 3, frame# 375
usb_control/bulk_msg: timeout
scsi2 : SCSI emulation for USB Mass Storage devices
  Vendor: Model: Rev:
  Type: Direct-Access ANSI SCSI revision: 02
Attached scsi removable disk sda at scsi2, channel 0, id 0, lun 0

I have the feeling that at least one of the slots is working, but how do I
mount it?

Relevant Pages
Loading