Redundant NIC config, need help

From: Lyndon Bartels (lbartels_at_pressenter.com)
Date: 10/27/04

  • Next message: Dances With Crows: "Re: Xorg+nvidia driver fail boot without monitor connected" 
    Date: Wed, 27 Oct 2004 16:55:26 -0500

    Hello all,

    I have a server running SuSE Linux Enterprise Server (SLES) v8.
    2.4.16-something kernel (I think)

    Anyway it has two NICs.

    I want to set them up so the server has one network IP address, but
    either NIC were to fail, or the path to that nic were to fail (ie. wire
    pulled) the other NIC would handle the traffic.

    I've been reading, googling, and not finding anything recent, and very
    little relevant.

    I found a beowolf document, but it's a couple years old. It talked about
    "bonding" interfaces... Ididn't make a lot of sense to me.

    Any pointers, info, web documents would be much appreciated.

    Thanks in advance,

    Lyndon

  • Next message: Dances With Crows: "Re: Xorg+nvidia driver fail boot without monitor connected"

    Relevant Pages

    • Re: Urgent! New router and big disaster
      ... NIC, you need to specify an external DNS server for DNS, instead of the ... Both NICs should point to his internal IP for DNS. ... forward ports to it reliably in the router. ...
      (microsoft.public.windows.server.sbs)
    • Re: CEICW fails at firewall config
      ... Do you or do you not have ISA 2000 or ISA 2004 installed on the SBS server? ... Do you have 2 NICs in the SBS? ... CEICW fails on firewall configuration every time. ... >>> Call to Creating the protected networks access rule returned ok. ...
      (microsoft.public.windows.server.sbs)
    • Re: Still cant connect to RWW or OWA remotely
      ... No Phantom NICs as far as I can see. ... that it can not find the server. ... Configure your Router as an Eithernet Bridge. ... Once you have this then configure the Routers Firewall and Port ...
      (microsoft.public.windows.server.sbs)
    • Re: Still cant connect to RWW or OWA remotely
      ... No Phantom NICs as far as I can see. ... that it can not find the server. ... Configure your Router as an Eithernet Bridge. ... Once you have this then configure the Routers Firewall and Port ...
      (microsoft.public.windows.server.sbs)
    • Re: FreeBSD 2 nic one to route one to DB - how do I?
      ... The second nic should route to the DB server. ... Just put the DB server and the second nic on the webserver on its own private network. ... So your FBSD machine is dual homed.. ... Option 1 needs both NICs, option 2 only needs one NIC. ...
      (comp.unix.bsd.freebsd.misc)