Re: hardware clock problems?

From: Eric (ericteuber_at_web.de)
Date: 10/28/05 

Date: Fri, 28 Oct 2005 20:52:26 +0200

ray wrote:
> On Wed, 26 Oct 2005 22:08:55 +0200, Eric wrote:
>
>
>>Hi all,
>>
>>my system comes up at boot with the time (and date) it has been shutdown
>>before. As soon xntp gets the right time from public timeservers,
>>everything is ok.
>>
>>I assume the hardware clock of my system isn't working anymore (it did
>>in the past, for sure). Is it the board battery?
>>
>>Could it be another problem, such as hardware clock isn't synchronized
>>anymore at shutdown?
>>If the battery is the problem, is every board using the same type or are
>>there differences?
>>And one stupid one... Why isn't the board using the power supply for the
>>HW-clock, if power is available (which is the case in my case)?
>>
>>Thanks and regards,
>>Eric
>
>
> One solution would be to not shut down. "Doc - it hurts when I do this. -
> Well, don't do that."
>

Great solution, i'll think about it, but there's something coming up.
"Boss - it isn't good when i do this. - Well, i don't care!"

Relevant Pages

  • hardware clock problems?
    ... my system comes up at boot with the time it has been shutdown ... I assume the hardware clock of my system isn't working anymore (it did ... Is it the board battery? ...
    (comp.os.linux.hardware)
  • Re: hardware clock problems?
    ... > my system comes up at boot with the time it has been shutdown ... > I assume the hardware clock of my system isn't working anymore (it did ... Is it the board battery? ...
    (comp.os.linux.hardware)
  • Re: Problem when shutting down
    ... >>stop FC4 from setting the hardware clock to the OS time when shutting ... > This may be a problem, but the HW clock needs set with shutdown because ... > actual hang here can imply a problem, but definitely says that the OS ... Do you perchance have the BIOS set to ...
    (Fedora)
  • Re: Problem when shutting down
    ... > stop FC4 from setting the hardware clock to the OS time when shutting ... but the HW clock needs set with shutdown because ... Do you perchance have the BIOS set to ... OS cannot write to the bios it presumable could cause a hang. ...
    (Fedora)
  • Problem when shutting down
    ... When I shutdown my computer, the system hangs while trying to set the ... upon reboot, the time and date are wrong. ... and time n the computer BOIS, so FC4 does not need to do this. ... stop FC4 from setting the hardware clock to the OS time when shutting ...
    (Fedora)