comp.os.linux.hardware

• Thread Index

---

• Re: Kernel 2.6 keyboard driver changes from 2.4
  • From: John-Paul Stewart
• Re: Dual Monitors and Fedora Core 4 64
  • From: llothar
• Re: Kernel 2.6 keyboard driver changes from 2.4
  • From: Henrik Carlqvist
• Re: Something wrong with NFORCE
  • From: mina
• Re: RAID, software or hardware?
  • From: AZ Nomad
• Re: Dell Poweredge servers remote console access?
  • From: Bob Boowumba
• video card
  • From: Darklight
• Re: SUSE 10 installation
  • From: Mark South
• Re: RAID, software or hardware?
  • From: benway
• Re: RAID, software or hardware?
  • From: benway
• Re: Kernel 2.6 keyboard driver changes from 2.4
  • From: sram
• Intel i915G/i945G integrated graphics OpenGL performance (Quake 3 et al)
  • From: Johannes Truschnigg
• Download?
  • From: Bojan Buiæ
• Re: Configuring a SupraExpress 56K modem
  • From: Nuno J. Silva (aka NJSG)
• Re: Kernel 2.6 keyboard driver changes from 2.4
  • From: Henrik Carlqvist
• Re: Something wrong with NFORCE
  • From: General Schvantzkoph
• Re: Dual Monitors and Fedora Core 4 64
  • From: ray
• Re: What's Celeron?
  • From: Nuno J. Silva (aka NJSG)
• Re: Dual Monitors and Fedora Core 4 64
  • From: RC
• Re: Dual Monitors and Fedora Core 4 64
  • From: ray
• SUSE 10 installation
  • From: RyanS09
• Re: empty lspci, /proc/pci
  • From: Steffen Chmil
• Re: Configuring a SupraExpress 56K modem
  • From: Moe Trin
• Re: CPU temperature increase when using USB
  • From: Miguel De Anda
• Re: Kernel 2.6 keyboard driver changes from 2.4
  • From: sram
• Something wrong with NFORCE
  • From: mina
• Dual Monitors and Fedora Core 4 64
  • From: RC
• Re: empty lspci, /proc/pci
  • From: Bill Marcum
• Re: Kernel 2.6 keyboard driver changes from 2.4
  • From: John-Paul Stewart
• Kernel 2.6 keyboard driver changes from 2.4
  • From: sram
• CPU temperature increase when using USB
  • From: Martin Fenelon
• empty lspci, /proc/pci
  • From: Steffen Chmil
• Re: quality of ATI 3D video drivers
  • From: ndros
• Re: quality of ATI 3D video drivers
  • From: ithinkiam
• Re: quality of ATI 3D video drivers
  • From: Nico Kadel-Garcia
• Re: Configuring a SupraExpress 56K modem
  • From: Nuno J. Silva (aka NJSG)
• Re: Does anything look wrong with this that would case IRQ conflicts/routing table errors?
  • From: Måns Rullgård
• Compex PS2216 control protocol
  • From: Dmitry Davletbaev
• Re: quality of ATI 3D video drivers
  • From: Matt
• Re: Does anything look wrong with this that would case IRQ conflicts/routing table errors?
  • From: jonfaquit
• Re: RAID, software or hardware?
  • From: Rikishi 42
• Freecom USB DVB-T issues
  • From: Zoinks
• Re: DataTraveler + RH9 = trouble
  • From: Eric
• Re: quality of ATI 3D video drivers
  • From: Matt
• USB Modem not recognized after boot
  • From: Bill
• Re: What's Celeron?
  • From: Bill Marcum
• Re: Does anything look wrong with this that would case IRQ conflicts/routing table errors?
  • From: jonfaquit
• Re: quality of ATI 3D video drivers
  • From: Nico Kadel-Garcia
• Re: Configuring a SupraExpress 56K modem
  • From: Nuno J. Silva (aka NJSG)
• Re: quality of ATI 3D video drivers
  • From: Måns Rullgård
• Re: ThinkPad X31 isntable under newer kernels?
  • From: nero
• Re: quality of ATI 3D video drivers
  • From: Matt
• Re: Pentium 4 running Debian terrible slow
  • From: Grant
• Re: Does anything look wrong with this that would case IRQ conflicts/routing table errors?
  • From: jonfaquit
• Re: Does anything look wrong with this that would case IRQ conflicts/routing table errors?
  • From: Måns Rullgård
• Re: Does anything look wrong with this that would case IRQ conflicts/routing table errors?
  • From: Måns Rullgård
• Re: Configuring a SupraExpress 56K modem
  • From: Nuno J. Silva (aka NJSG)
• ThinkPad X31 isntable under newer kernels?
  • From: kalium@xxxxxx
• Re: Does anything look wrong with this that would case IRQ conflicts/routing table errors?
  • From: jonfaquit
• Does anything look wrong with this that would case IRQ conflicts/routing table errors?
  • From: jonfaquit
• Re: please critique these two Athlon X2 3800+ configs
  • From: General Schvantzkoph
• Re: RAID, software or hardware?
  • From: dnoyeB
• Re: RAID, software or hardware?
  • From: Måns Rullgård
• Re: RAID, software or hardware?
  • From: John-Paul Stewart
• Re: Pentium 4 running Debian terrible slow
  • From: brunft
• Re: RAID, software or hardware?
  • From: Michael Heiming
• Re: DataTraveler + RH9 = trouble
  • From: Dances With Crows
• Re: Pentium 4 running Debian terrible slow
  • From: Giovanni
• Re: Pentium 4 running Debian terrible slow
  • From: brunft
• DataTraveler + RH9 = trouble
  • From: Eric
• Re: RAID, software or hardware?
  • From: John-Paul Stewart
• Re: please critique these two Athlon X2 3800+ configs
  • From: Johannes Truschnigg
• Re: RAID, software or hardware?
  • From: dnoyeB
• Re: Configuring a SupraExpress 56K modem
  • From: Dances With Crows
• Re: Pentium 4 running Debian terrible slow
  • From: General Schvantzkoph
• Re: Pentium 4 running Debian terrible slow
  • From: Grant
• Re: Configuring a SupraExpress 56K modem
  • From: Nuno J. Silva (aka NJSG)
• Re: Pentium 4 running Debian terrible slow
  • From: brunft
• Big ethernet TCP/IP disk
  • From: groumph!!
• Re: Pentium 4 running Debian terrible slow
  • From: Giovanni
• Re: RAID, software or hardware?
  • From: Michael Heiming
• Re: RAID, software or hardware?
  • From: Grant
• Re: RAID, software or hardware?
  • From: Michael Heiming
• Re: After linux's network works, win XP's network cannot work ?
  • From: mango
• Re: RAID, software or hardware?
  • From: Chris Cox
• nvidia drivers with x86_64
  • From: stdundon
• Re: Considering a removable hard drive
  • From: coffee
• Re: suggested tape drives?
  • From: coffee
• Re: Pentium 4 running Debian terrible slow
  • From: General Schvantzkoph
• Pentium 4 running Debian terrible slow
  • From: brunft
• Re: RAID, software or hardware?
  • From: AZ Nomad
• Re: RAID, software or hardware?
  • From: Chris Cox
• Re: What's Celeron?
  • From: Nuno J. Silva (aka NJSG)
• Re: What's Celeron?
  • From: Nuno J. Silva (aka NJSG)
• Re: Configuring a SupraExpress 56K modem
  • From: Nuno J. Silva (aka NJSG)
• Re: Configuring a SupraExpress 56K modem
  • From: Nuno J. Silva (aka NJSG)
• suggested tape drives?
  • From: Wizumwalt@xxxxxxxxx
• RAID, software or hardware?
  • From: dnoyeB
• Re: Basic RAID concerns and Linux OS
  • From: Grant
• needing tape backups
  • From: Wizumwalt@xxxxxxxxx
• Re: Configuring a SupraExpress 56K modem
  • From: Moe Trin
• Re: Configuring a SupraExpress 56K modem
  • From: Mark South
• Re: Configuring a SupraExpress 56K modem
  • From: Scott Alfter
• Dell Poweredge servers remote console access?
  • From: Troy
• Considering a removable hard drive
  • From: Mark Adams
• Re: What's Celeron?
  • From: John-Paul Stewart
• Re: What's Celeron?
  • From: Mark South
• Re: Configuring a SupraExpress 56K modem
  • From: Dances With Crows
• Re: Configuring a SupraExpress 56K modem
  • From: Bill Marcum
• Re: What's Celeron?
  • From: Chris
• Re: After linux's network works, win XP's network cannot work ?
  • From: CoolFox
• udevd not compliyng udev.rule ?
  • From: eb
• Re: Multiple hardware issues
  • From: Doug Laidlaw
• Re: Recommendation for Blade-style Rackmount Chassis
  • From: John-Paul Stewart
• Configuring a SupraExpress 56K modem
  • From: Nuno J. Silva (aka NJSG)
• Re: Slot 1 Pentium 3 heatsink and fan.
  • From: Jim Ford
• Re: Slot 1 Pentium 3 heatsink and fan.
  • From: Poly-poly man
• What's Celeron?
  • From: Nuno J. Silva (aka NJSG)
• Re: Recommendation for Blade-style Rackmount Chassis
  • From: J. Clarke
• Recommendation for Blade-style Rackmount Chassis
  • From: johnspencerjr2
• Re: Slot 1 Pentium 3 heatsink and fan.
  • From: Poly-poly man
• Re: After linux's network works, win XP's network cannot work ?
  • From: Tauno Voipio
• Re: After linux's network works, win XP's network cannot work ?
  • From: mango
• Re: How much data can fit on a 4.7 Gb DVD ?
  • From: Steve Martin
• Re: Help with dual head setup/xorg.conf on FC5?
  • From: Steve Martin
• Re: After linux's network works, win XP's network cannot work ?
  • From: General Schvantzkoph
• Re: Multiple hardware issues
  • From: laidlaws
• Re: Slot 1 Pentium 3 heatsink and fan.
  • From: Giovanni
• Re: Slot 1 Pentium 3 heatsink and fan.
  • From: Dave Stanton
• Re: After linux's network works, win XP's network cannot work ?
  • From: mango
• Re: Maxtor OneTouch/Firewire puts excessive load on system
  • From: Robert S
• Re: After linux's network works, win XP's network cannot work ?
  • From: mango
• Re: Slot 1 Pentium 3 heatsink and fan.
  • From: Captain Dondo
• Re: Slot 1 Pentium 3 heatsink and fan.
  • From: Jim Ford
• Re: Slot 1 Pentium 3 heatsink and fan.
  • From: Trevor Hemsley
• Re: AMD/Intel compatibility again
  • From: Emmanual Kann
• Slot 1 Pentium 3 heatsink and fan.
  • From: Jim Ford
• Should I fsck a DVD-RAM ?
  • From: Chris Carlen
• Re: After linux's network works, win XP's network cannot work ?
  • From: Tauno Voipio
• Re: AMD/Intel compatibility again
  • From: J. Clarke
• Re: Is there any Microsoft-compatible USB mouse?
  • From: Bill Marcum
• Re: Maxtor OneTouch/Firewire puts excessive load on system
  • From: John-Paul Stewart
• Re: Is there any Microsoft-compatible USB mouse?
  • From: John-Paul Stewart
• Re: After linux's network works, win XP's network cannot work ?
  • From: mango
• Re: Is there any Microsoft-compatible USB mouse?
  • From: Norm Dresner
• Re: Maxtor OneTouch/Firewire puts excessive load on system
  • From: Trevor Hemsley
• Stuck at 800x600 resolution
  • From: oneshot_48
• Re: Maxtor OneTouch/Firewire puts excessive load on system
  • From: Robert S
• Re: a notebook for Linux: ATI or Intel graphics?
  • From: Chris
• Re: Multiple hardware issues
  • From: Chris
• Re: installing Ubuntu 5.10 on Acer TravelMate 4152LMi - cannot detect CDROM
  • From: Mark South
• Re: Multiple hardware issues
  • From: nero
• Re: how to get hardware information
  • From: johnny bobby bee
• Re: installing Ubuntu 5.10 on Acer TravelMate 4152LMi - cannot detect CDROM
  • From: johnny bobby bee
• Re: installing Ubuntu 5.10 on Acer TravelMate 4152LMi - cannot detect CDROM
  • From: Doug Laidlaw
• Is there any Microsoft-compatible USB mouse?
  • From: jxzrobert
• Multiple hardware issues
  • From: Doug Laidlaw
• installing Ubuntu 5.10 on Acer TravelMate 4152LMi - cannot detect CDROM
  • From: grnadav
• Re: How much data can fit on a 4.7 Gb DVD ?
  • From: Poly-poly man
• Re: how to get hardware information
  • From: Juha Laiho
• Re: a notebook for Linux: ATI or Intel graphics?
  • From: Scott Alfter
• Re: Help with dual head setup/xorg.conf on FC5?
  • From: junkaddress_
• Re: Suggest a linux distro - programming/development machine
  • From: trohricht@xxxxxxxxxxxxxxx
• Re: Maxtor OneTouch/Firewire puts excessive load on system
  • From: Bob Boowumba
• Re: Help with dual head setup/xorg.conf on FC5?
  • From: ray
• Re: Suggest a linux distro - programming/development machine
  • From: Chris
• Re: Suggest a linux distro - programming/development machine
  • From: Dances With Crows
• Re: 5 PCI slots, 5 cards: Are IRQ conflicts inevitable?
  • From: J. Clarke
• Re: Suggest a linux distro - programming/development machine
  • From: trohricht@xxxxxxxxxxxxxxx
• Help with dual head setup/xorg.conf on FC5?
  • From: oneshot_48
• Re: After linux's network works, win XP's network cannot work ?
  • From: General Schvantzkoph
• Re: After linux's network works, win XP's network cannot work ?
  • From: Chris
• Re: a notebook for Linux: ATI or Intel graphics?
  • From: Chris
• Re: how to get hardware information
  • From: ckpradip
• After linux's network works, win XP's network cannot work ?
  • From: winwish
• Re: Setting up LCD monitor.
  • From: Doug Laidlaw
• Re: how to get hardware information
  • From: Dances With Crows
• how to get hardware information
  • From: shahbazc
• Re: a notebook for Linux: ATI or Intel graphics?
  • From: Scott Alfter
• Re: Printer epson d68 and scanner hp2400c usb
  • From: John-Paul Stewart
• Re: check network speed and duplex without mii-tool and ethtool
  • From: Dances With Crows
• Re: Suggest a linux distro - programming/development machine
  • From: J. Clarke
• Re: a notebook for Linux: ATI or Intel graphics?
  • From: Chris
• Re: Setting up LCD monitor.
  • From: Chris
• Printer epson d68 and scanner hp2400c usb
  • From: ameleo66
• Bad page state?
  • From: Johannes Beekhuizen
• Re: a notebook for Linux: ATI or Intel graphics?
  • From: Chris
• Setting up LCD monitor.
  • From: Doug Laidlaw
• check network speed and duplex without mii-tool and ethtool
  • From: zip
• Re: Need help configuring an Hitachi CRT display
  • From: Nuno J. Silva (aka NJSG)
• Re: a notebook for Linux: ATI or Intel graphics?
  • From: Miguel De Anda
• Re: a notebook for Linux: ATI or Intel graphics?
  • From: Miguel De Anda
• Re: a notebook for Linux: ATI or Intel graphics?
  • From: Scott Alfter
• Re: a notebook for Linux: ATI or Intel graphics?
  • From: Scott Alfter
• Re: I can't setup HP DesignJet 500 printer under Red Hat, how should I do?
  • From: Captain Dondo
• driver per palladio wave 54 Cx
  • From: Alfonso Aiello
• Re: a notebook for Linux: ATI or Intel graphics?
  • From: Chris
• Re: a notebook for Linux: ATI or Intel graphics?
  • From: M.Kmann
• Re: a notebook for Linux: ATI or Intel graphics?
  • From: Chris
• Re: a notebook for Linux: ATI or Intel graphics?
  • From: Chris
• Maxtor OneTouch/Firewire puts excessive load on system
  • From: Robert S
• Re: a notebook for Linux: ATI or Intel graphics?
  • From: Miguel De Anda
• another USB Skype adaptor claiming Linux support
  • From: Adam Monsen
• Re: Suggest a linux distro - programming/development machine
  • From: Grant
• Re: Suggest a linux distro - programming/development machine
  • From: Dances With Crows
• Re: 5 PCI slots, 5 cards: Are IRQ conflicts inevitable?
  • From: Dennis
• Re: Suggest a linux distro - programming/development machine
  • From: Grant
• Re: a notebook for Linux: ATI or Intel graphics?
  • From: Scott Alfter
• 5 PCI slots, 5 cards: Are IRQ conflicts inevitable?
  • From: clowes_ian
• Re: Problem recognising the USB2.0 PCI card...
  • From: Ray
• Re: Need help configuring an Hitachi CRT display
  • From: Chris
• Re: a notebook for Linux: ATI or Intel graphics?
  • From: Chris
• what wifi to get?
  • From: SERGE
• D-Link Gigabit adapter get VPD error
  • From: General Schvantzkoph
• Re: a notebook for Linux: ATI or Intel graphics?
  • From: M.Kmann
• Re: Need help configuring an Hitachi CRT display
  • From: Nuno J. Silva (aka NJSG)
• Re: USB catc problems
  • From: Lasse Jensen
• Re: a notebook for Linux: ATI or Intel graphics?
  • From: Poly-poly man
• Re: USB catc problems
  • From: Bill Marcum
• Re: Can't boot CD on PowerEdge
  • From: sky_diver_
• Re: bootloader failure with SATA HDD + PCI Host Adapter
  • From: Grant
• USB catc problems
  • From: Lasse Jensen
• Re: a notebook for Linux: ATI or Intel graphics?
  • From: Henrik Carlqvist
• Re: a notebook for Linux: ATI or Intel graphics?
  • From: ray
• Re: a notebook for Linux: ATI or Intel graphics?
  • From: General Schvantzkoph
• a notebook for Linux: ATI or Intel graphics?
  • From: rga
• bootloader failure with SATA HDD + PCI Host Adapter
  • From: huugske@xxxxxxxxx
• Re: cypress at2lp usb-storage driver ? (mvix 5000u)
  • From: ivowel
• Odd issue with Promise RAID controller
  • From: cypher_key
• Re: Dell Dimension XPS T500 not loading Linux nor Unix. Why?
  • From: x0054
• Multiple USB Cuecats Linux Driver
  • From: Pknific
• Re: Problem recognising the USB2.0 PCI card...
  • From: switcher
• Can't boot CD on PowerEdge
  • From: sky_diver_
• Re: Dell Dimension XPS T500 not loading Linux nor Unix. Why?
  • From: Mark South
• Re: Kernel 2.6 supported ULTRA 160 SCIS card needed
  • From: John-Paul Stewart
• Re: Kernel 2.6 supported ULTRA 160 SCIS card needed
  • From: John-Paul Stewart
• Re: Dell Dimension XPS T500 not loading Linux nor Unix. Why?
  • From: ray
• Re: Kernel 2.6 supported ULTRA 160 SCIS card needed
  • From: ray
• Re: Kernel 2.6 supported ULTRA 160 SCIS card needed
  • From: Andrew Schulman
• Re: Dell Dimension XPS T500 not loading Linux nor Unix. Why?
  • From: Andrew Schulman
• Re: Dell Dimension XPS T500 not loading Linux nor Unix. Why?
  • From: AZ Nomad
• Kernel 2.6 supported ULTRA 160 SCIS card needed
  • From: G Dahler
• Re: Dell Dimension XPS T500 not loading Linux nor Unix. Why?
  • From: Andrew Schulman
• Re: Microsoft Natural Ergonomic keyboard 4000 - special keys?
  • From: Chris
• Microsoft Natural Ergonomic keyboard 4000 - special keys?
  • From: n6nz
• Re: problems with 82815
  • From: Joseph2k
• Re: What versions of the kernel support HT or dual core CPUs?
  • From: Joseph2k
• Re: RH dual boot and no diskette drive installation
  • From: Joseph2k
• Re: printing from linux to windows
  • From: Joseph2k
• Re: Connecting Linux to TV
  • From: Joseph2k
• Re: memtest errors
  • From: Joseph2k
• Re: Dell Precison 650
  • From: Joseph2k
• Re: joystick / steering wheel
  • From: Dances With Crows
• Re: Dell Dimension XPS T500 not loading Linux nor Unix. Why?
  • From: Mark South
• Dell Dimension XPS T500 not loading Linux nor Unix. Why?
  • From: x0054
• Re: joystick / steering wheel
  • From: Eben King
• Re: joystick / steering wheel
  • From: Dances With Crows
• joystick / steering wheel
  • From: Eben King
• Suse 10 Installation Problems
  • From: Bill Smith
• Re: How fault tolerant can Linux be?
  • From: Joseph2k
• Re: No sound in XMMS
  • From: TDM
• cypress at2lp usb-storage driver ? (mvix 5000u)
  • From: ivowel
• Re: printer choice
  • From: Jerry Peters
• Re: Problem recognising the USB2.0 PCI card...
  • From: Ray
• Re: Problem recognising the USB2.0 PCI card...
  • From: Dances With Crows
• Problem recognising the USB2.0 PCI card...
  • From: switcher
• Re: mini-itx power supply
  • From: ray
• Re: printer choice
  • From: ray
• Re: ATI vs. nVidia for general Linux use: my results
  • From: Rick Moen
• Re: pcmcia with a serial port
  • From: Daniele Pernechele
• Re: ATI vs. nVidia for general Linux use: my results
  • From: Daniel Barrett
• Re: pcmcia with a serial port
  • From: Daniele Pernechele
• PCMCIA into the kernel
  • From: Freaky
• Re: printer choice
  • From: Tommy Willoughby
• Re: No sound in XMMS
  • From: Che Scott
• Re: Console on parallel port
  • From: John-Paul Stewart
• Re: What versions of the kernel support HT or dual core CPUs?
  • From: General Schvantzkoph
• Re: What versions of the kernel support HT or dual core CPUs?
  • From: AZ Nomad
• Re: What versions of the kernel support HT or dual core CPUs?
  • From: Chris
• Re: No sound in XMMS
  • From: TDM
• Help needed: strange orinoco card behaviour
  • From: ys
• Re: What versions of the kernel support HT or dual core CPUs?
  • From: Norm Dresner
• Re: What versions of the kernel support HT or dual core CPUs?
  • From: Norm Dresner
• Re: No sound in XMMS
  • From: Che Scott
• Re: No sound in XMMS
  • From: simonp
• printer choice
  • From: Larry Blanchard
• Re: Console on parallel port
  • From: Bill Marcum
• Re: Problem with disk dma mode
  • From: Whoever
• Re: mini-itx power supply
  • From: Moe Trin
• Re: Problem on seagate ST340016A
  • From: Grant
• Console on parallel port
  • From: maxx
• Re: Problem on seagate ST340016A
  • From: Måns Rullgård
• Re: which video with only source drivers
  • From: Mark South
• Re: overclock in linux, not BIOS?
  • From: J. Clarke
• Re: overclock in linux, not BIOS?
  • From: Chris
• No sound in XMMS
  • From: TDM
• Re: What versions of the kernel support HT or dual core CPUs?
  • From: J. Clarke
• Re: What versions of the kernel support HT or dual core CPUs?
  • From: J. Clarke
• Re: overclock in linux, not BIOS?
  • From: ivowel
• Re: overclock in linux, not BIOS?
  • From: Chris
• Re: overclock in linux, not BIOS?
  • From: Chris
• Re: What versions of the kernel support HT or dual core CPUs?
  • From: AZ Nomad
• Problem on seagate ST340016A
  • From: castornightmare
• Re: What versions of the kernel support HT or dual core CPUs?
  • From: Norm Dresner
• Re: What versions of the kernel support HT or dual core CPUs?
  • From: Norm Dresner
• Re: overclock in linux, not BIOS?
  • From: J. Clarke
• Re: overclock in linux, not BIOS?
  • From: J. Clarke
• Re: overclock in linux, not BIOS?
  • From: J. Clarke
• Re: overclock in linux, not BIOS?
  • From: Emmanual Kann
• Re: pcmcia with a serial port
  • From: Bill Marcum
• Re: overclock in linux, not BIOS?
  • From: Chris
• Re: overclock in linux, not BIOS?
  • From: Chris
• Re: overclock in linux, not BIOS?
  • From: Grant
• Re: overclock in linux, not BIOS?
  • From: AZ Nomad
• Re: overclock in linux, not BIOS?
  • From: J. Clarke
• Re: overclock in linux, not BIOS?
  • From: J. Clarke
• problems with 82815
  • From: Connie Sutherland
• Re: overclock in linux, not BIOS?
  • From: Grant
• Re: Problem with disk dma mode (solved)
  • From: Grant
• Re: overclock in linux, not BIOS?
  • From: Måns Rullgård
• Re: Problem with disk dma mode (solved)
  • From: Janko
• Re: Problem with disk dma mode
  • From: Grant
• Re: Problem with disk dma mode
  • From: iforone
• Re: Problem with disk dma mode
  • From: Grant
• Re: What versions of the kernel support HT or dual core CPUs?
  • From: Rick Moen
• Re: What versions of the kernel support HT or dual core CPUs?
  • From: Rick Moen
• Re: What versions of the kernel support HT or dual core CPUs?
  • From: Rick Moen
• Re: which video with only source drivers
  • From: Rick Moen
• Re: Problem with disk dma mode
  • From: iforone
• Re: overclock in linux, not BIOS?
  • From: J. Clarke
• Re: mini-itx power supply
  • From: ray
• Re: overclock in linux, not BIOS?
  • From: Måns Rullgård
• Re: overclock in linux, not BIOS?
  • From: AZ Nomad
• Re: overclock in linux, not BIOS?
  • From: J. Clarke
• Re: overclock in linux, not BIOS?
  • From: General Schvantzkoph
• Problem with disk dma mode
  • From: Janko
• Re: overclock in linux, not BIOS?
  • From: Måns Rullgård
• Re: What versions of the kernel support HT or dual core CPUs?
  • From: General Schvantzkoph
• Re: What versions of the kernel support HT or dual core CPUs?
  • From: AZ Nomad
• FC4@Sony Vaio VGN-FE11S
  • From: ndros
• Re: What versions of the kernel support HT or dual core CPUs?
  • From: Chris
• Re: gphoto2 problem
  • From: General Schvantzkoph
• Re: What versions of the kernel support HT or dual core CPUs?
  • From: Grant
• pcmcia with a serial port
  • From: Daniele Pernechele
• Re: What versions of the kernel support HT or dual core CPUs?
  • From: Norm Dresner
• Re: gphoto2 problem
  • From: Chris
• Re: overclock in linux, not BIOS?
  • From: Grant
• Re: gphoto2 problem
  • From: Chris
• mini-itx power supply
  • From: ray
• Re: What versions of the kernel support HT or dual core CPUs?
  • From: Norm Dresner
• Re: What versions of the kernel support HT or dual core CPUs?
  • From: Norm Dresner
• Re: What versions of the kernel support HT or dual core CPUs?
  • From: Norm Dresner
• Re: What versions of the kernel support HT or dual core CPUs?
  • From: John-Paul Stewart
• Re: ASUS P5P800SE & P5P800
  • From: Chris
• Re: Need help configuring an Hitachi CRT display
  • From: Chris
• Re: overclock in linux, not BIOS?
  • From: J. Clarke
• Re: Scanner CanoScan FB310P on GNU-Linux
  • From: Doug Laidlaw
• ücretsiz programlar
  • From: Mak
• Re: Microsoft Ergonomic 4000 keyboard
  • From: simonp
• Re: Microsoft Ergonomic 4000 keyboard
  • From: thunder
• Re: What versions of the kernel support HT or dual core CPUs?
  • From: ray
• Re: overclock in linux, not BIOS?
  • From: Grant
• Re: Microsoft Ergonomic 4000 keyboard
  • From: Dances With Crows
• Microsoft Ergonomic 4000 keyboard
  • From: Jeff Boes
• overclock in linux, not BIOS?
  • From: ivowel
• Re: Which tape drive
  • From: JM
• Re: RH dual boot and no diskette drive installation
  • From: formica dinette
• Re: What versions of the kernel support HT or dual core CPUs?
  • From: AZ Nomad
• Re: What versions of the kernel support HT or dual core CPUs?
  • From: Trevor Hemsley
• Re: What versions of the kernel support HT or dual core CPUs?
  • From: Måns Rullgård
• Re: What versions of the kernel support HT or dual core CPUs?
  • From: Norm Dresner
• Re: RH dual boot and no diskette drive installation
  • From: Peter D.
• Re: What versions of the kernel support HT or dual core CPUs?
  • From: Grant
• Re: What versions of the kernel support HT or dual core CPUs?
  • From: Henrik Carlqvist
• Re: Binding process to a CPU on Linux?
  • From: J. Clarke
• Re: Binding process to a CPU on Linux?
  • From: x0054
• Re: gphoto2 problem
  • From: SQ
• Re: RH dual boot and no diskette drive installation
  • From: jason
• Re: Connecting Linux to TV
  • From: Dave Stanton
• Re: Scanning slides with xsane
  • From: Colin Brace
• gphoto2 problem
  • From: SQ
• Re: ASUS Pundit-R350 USB Problem
  • From: Randy Cooper
• Re: What versions of the kernel support HT or dual core CPUs?
  • From: ray
• Re: RH dual boot and no diskette drive installation
  • From: Bill Marcum
• Re: which video with only source drivers
  • From: John-Paul Stewart
• Re: What versions of the kernel support HT or dual core CPUs?
  • From: John-Paul Stewart
• Re: Scanner CanoScan FB310P on GNU-Linux
  • From: John-Paul Stewart
• Re: RH dual boot and no diskette drive installation
  • From: jason
• Re: RH dual boot and no diskette drive installation
  • From: Dances With Crows
• Re: RH dual boot and no diskette drive installation
  • From: jason
• Re: Binding process to a CPU on Linux?
  • From: J. Clarke
• Re: What versions of the kernel support HT or dual core CPUs?
  • From: Måns Rullgård
• What versions of the kernel support HT or dual core CPUs?
  • From: Norm Dresner
• Re: RH dual boot and no diskette drive installation
  • From: Neilc252
• RH dual boot and no diskette drive installation
  • From: jason
• Re: printing from linux to windows
  • From: Bill Marcum
• Re: Problem with clock interrupt
  • From: iforone
• Re: Scanner CanoScan FB310P on GNU-Linux
  • From: Giovanni
• Re: Connecting Linux to TV
  • From: Neilc252
• Re: Connecting Linux to TV
  • From: Miguel De Anda
• Binding process to a CPU on Linux?
  • From: x0054
• printing from linux to windows
  • From: Neilc252
• Connecting Linux to TV
  • From: Neil Chambers
• ASUS P5P800SE & P5P800
  • From: Drew
• Re: which video with only source drivers
  • From: simonp
• Re: which video with only source drivers
  • From: Rick Moen
• Re: ATI vs. nVidia for general Linux use: my results
  • From: Rick Moen
• Re: Scanning slides with xsane
  • From: ray
• Re: Scanning slides with xsane
  • From: Colin Brace
• Re: How to find VBIOS address?
  • From: simonp
• Scanner CanoScan FB310P on GNU-Linux
  • From: g14nc4rl0
• Re: Problem with clock interrupt
  • From: Dragonmaster Lou
• Re: Scanning slides with xsane
  • From: Johannes Beekhuizen
• Scanning slides with xsane
  • From: Colin Brace
• Re: How to find VBIOS address?
  • From: iforone
• How to find VBIOS address?
  • From: simonp
• Re: Problem with clock interrupt
  • From: iforone
• memtest errors
  • From: David Zelinsky
• Re: ATI vs. nVidia for general Linux use: my results
  • From: simonp
• Re: Need help configuring an Hitachi CRT display
  • From: Nuno J. Silva (aka NJSG)
• Re: Which tape drive
  • From: frank4fun
• Re: ASUS Pundit-R350 USB Problem
  • From: Henrik Carlqvist
• Re: which video with only source drivers
  • From: Henrik Carlqvist
• Re: ATI vs. nVidia for general Linux use: my results
  • From: Scott Alfter
• Re: ATI vs. nVidia for general Linux use: my results
  • From: John-Paul Stewart
• Re: How much data can fit on a 4.7 Gb DVD ?
  • From: B Thomas
• Linux on Shuttle SN21G5
  • From: supermufin@xxxxxxxxxxx
• Re: which video with only source drivers
  • From: Captain Dondo
• Re: How much data can fit on a 4.7 Gb DVD ?
  • From: iforone
• Re: Help with gphoto and digital camera
  • From: General Schvantzkoph
• Re: How much data can fit on a 4.7 Gb DVD ?
  • From: Trevor Hemsley
• Re: ATI vs. nVidia for general Linux use: my results
  • From: phil-news-nospam
• How much data can fit on a 4.7 Gb DVD ?
  • From: B Thomas
• Help with gphoto and digital camera
  • From: SQ
• ASUS Pundit-R350 USB Problem
  • From: Randy Cooper
• Re: ATI vs. nVidia for general Linux use: my results
  • From: simonp
• Re: which video with only source drivers
  • From: John-Paul Stewart
• Re: How to find the RAM speed in linux?
  • From: srivatsan . parthasarathy
• Re: which video with only source drivers
  • From: General Schvantzkoph
• Re: which video with only source drivers
  • From: ray
• Re: which video with only source drivers
  • From: phil-news-nospam
• Re: which video with only source drivers
  • From: phil-news-nospam
• Re: which video with only source drivers
  • From: phil-news-nospam
• Re: Dell Precison 650
  • From: Dances With Crows
• Re: Dell Precison 650
  • From: John-Paul Stewart
• Re: Dell Precison 650
  • From: SQ
• Re: Dell Precison 650
  • From: General Schvantzkoph
• Re: Dell Precison 650
  • From: John-Paul Stewart
• Re: Dell Precison 650
  • From: SQ
• Re: How fault tolerant can Linux be?
  • From: kermit
• Re: Dell Precison 650
  • From: John-Paul Stewart
• Re: Dell Precison 650
  • From: General Schvantzkoph
• Re: which video with only source drivers
  • From: B Thomas
• Re: Dell Precison 650
  • From: Dances With Crows
• Re: How to find the RAM speed in linux?
  • From: Andrew Schulman
• Re: Dell Precison 650
  • From: SQ
• Re: Dell Precison 650
  • From: SQ
• Re: Need help configuring an Hitachi CRT display
  • From: Chris
• Re: which video with only source drivers
  • From: ray
• Re: Dell Precison 650
  • From: General Schvantzkoph
• Re: which video with only source drivers
  • From: Dances With Crows
• which video with only source drivers
  • From: phil-news-nospam
• Re: Micro ATX Linux machine?
  • From: phil-news-nospam
• Re: Micro ATX Linux machine?
  • From: phil-news-nospam
• Re: Micro ATX Linux machine?
  • From: phil-news-nospam
• Re: Dell Precison 650
  • From: Giovanni
• Re: Need help configuring an Hitachi CRT display
  • From: Nuno J. Silva (aka NJSG)
• Re: Dell Precison 650
  • From: Chris
• Re: How to find the RAM speed in linux?
  • From: Chris
• sound card problem on asus a6b
  • From: gnustikos
• Re: How to find the RAM speed in linux?
  • From: Andrew Schulman
• USB Webcam and Linux?
  • From: Sirio Alessandrelli
• Re: Lexmark X1155
  • From: hoodooman
• How to find the RAM speed in linux?
  • From: srivatsan . parthasarathy
• Re: ATI vs. nVidia for general Linux use: my results
  • From: Måns Rullgård
• Re: ATI vs. nVidia for general Linux use: my results
  • From: jakob
• Re: ATI vs. nVidia for general Linux use: my results
  • From: Wolfgang Draxinger
• Re: pci sound device disappears
  • From: Måns Rullgård
• Re: dma problems with my harddrive (again)
  • From: dagecko
• Re: pci sound device disappears
  • From: Emery Davis
• Re: Looking for a 17" lcd monitor - high resolution
  • From: SQ
• Dell Precison 650
  • From: SQ
• Re: pci sound device disappears
  • From: Måns Rullgård
• Re: How fault tolerant can Linux be?
  • From: J. Clarke
• Re: HDD setup problem (hardware or Linux ?)
  • From: Grant
• Re: Lexmark X1155
  • From: Dean Schaf
• Re: How fault tolerant can Linux be?
  • From: Juha Laiho
• Re: HDD setup problem (hardware or Linux ?)
  • From: glu
• ATI vs. nVidia for general Linux use: my results
  • From: Daniel Barrett
• Re: HDD setup problem (hardware or Linux ?)
  • From: glu
• Any experience with Maxtor OneTouch III Turbo?
  • From: rrbauer@xxxxxxxxx
• Re: HDD setup problem (hardware or Linux ?)
  • From: Bit Twister
• Re: building linux server for the 1 time
  • From: Michael Perry
• Re: HDD setup problem (hardware or Linux ?)
  • From: John-Paul Stewart
• HDD setup problem (hardware or Linux ?)
  • From: glu
• Re: Need help configuring an Hitachi CRT display
  • From: Chris
• Need help configuring an Hitachi CRT display
  • From: Nuno J, Silva (aka NJSG)
• How to spin-down a Lacie 500GB Big Disk Extreme
  • From: cgrafham
• Re: Problem with clock interrupt
  • From: Dragonmaster Lou
• Re: Problem with clock interrupt
  • From: Dragonmaster Lou
• pci sound device disappears
  • From: Emery Davis
• Re: Problem with clock interrupt
  • From: iforone
• Re: notebook cooling pad
  • From: Ron Springer
• Re: RH 8.0 drivers for dell flat screen monitor
  • From: brian . warn
• Re: notebook cooling pad
  • From: Miguel De Anda
• Re: Problem with clock interrupt
  • From: John-Paul Stewart
• PCI ethernet card probe hangs at boot
  • From: Boby
• Re: Problem with clock interrupt
  • From: Dragonmaster Lou
• How fault tolerant can Linux be?
  • From: Andrew Gideon
• Re: Problem with clock interrupt
  • From: John-Paul Stewart
• Re: Can drives be powered on/off in a server
  • From: Rikishi 42
• Problem with clock interrupt
  • From: Dragonmaster Lou
• Re: notebook cooling pad
  • From: Eggert Ehmke
• how to register luns with OS?
  • From: Agony
• Re: notebook cooling pad
  • From: Miguel De Anda
• Re: TCO and users/box
  • From: Chris
• notebook cooling pad
  • From: Eggert Ehmke
• Re: Problem with RHEL3.0: Sony GDM 17E21 monitor and Rendition Verite 1000 graphics card
  • From: Henrik Carlqvist
• building linux server for the 1 time
  • From: SERGE
• Disable fifo buffers?
  • From: archie37
• Re: US Hub???
  • From: roN
• Lexmark X1155
  • From: ArameFarpado
• Re: linux notebook recommendation
  • From: Dave Vandervies
• Re: Can drives be powered on/off in a server
  • From: Dances With Crows
• Can drives be powered on/off in a server
  • From: larryalk
• Re: PCI ethernet card probe hangs at boot
  • From: AZ Nomad
• Re: Printer Linux9.3-Windows-network
  • From: King Beowulf
• Ricoh PCI Cardbus Reader - No IRQ on kernel 2.6
  • From: crumby
• Problem with RHEL3.0: Sony GDM 17E21 monitor and Rendition Verite 1000 graphics card
  • From: mittra
• Re: US Hub???
  • From: Dances With Crows
• Re: TCO and users/box
  • From: Michael Heiming
• Re: TCO and users/box
  • From: sinister
• Re: TCO and users/box
  • From: sinister
• US Hub???
  • From: roN
• Re: linux notebook recommendation
  • From: Dave Vandervies
• Re: RH 8.0 drivers for dell flat screen monitor
  • From: Måns Rullgård
• RH 8.0 drivers for dell flat screen monitor
  • From: brian . warn
• Re: TCO and users/box
  • From: Henrik Carlqvist
• Sound problem under FC4
  • From: surfer dude
• Re: TCO and users/box
  • From: Michael Heiming
• Re: TCO and users/box
  • From: Joseph2k
• Re: TCO and users/box
  • From: sinister
• Re: TCO and users/box
  • From: sinister
• Re: Request - Suggestions for External DVD writer for Linux
  • From: ray
• Re: TCO and users/box
  • From: Henrik Carlqvist
• Re: TCO and users/box
  • From: Michael Heiming
• New install boot failure on HPT374
  • From: skaffman
• Re: TCO and users/box
  • From: sinister
• Re: TCO and users/box
  • From: Michael Heiming
• Re: TCO and users/box
  • From: sinister
• Re: TCO and users/box
  • From: sinister
• Re: TCO and users/box
  • From: John-Paul Stewart
• Re: TCO and users/box
  • From: J. Clarke
• TCO and users/box
  • From: sinister
• Re: Looking for a 17" lcd monitor - high resolution
  • From: B'ichela
• Re: Request - Suggestions for External DVD writer for Linux
  • From: Lenard
• Request - Suggestions for External DVD writer for Linux
  • From: B Thomas
• Re: IBM xSeries 346 and Serveraid 7k vs. 7e
  • From: Andrew Gideon
• Re: Printer Linux9.3-Windows-network
  • From: John-Paul Stewart
• Pinnacle PCTV poor picture quality
  • From: Ivica Grujic
• Re: Printer Linux9.3-Windows-network
  • From: Henrik Carlqvist
• Re: After install can't boot to hard drive
  • From: phwashington
• Re: 64bit hardware - 32 or 64 bit O/S. (conclusions!)
  • From: General Schvantzkoph
• Re: HP Ultrium and Tar/Cpio
  • From: Joshua Baker-LePain
• Re: 64bit hardware - 32 or 64 bit O/S. (conclusions!)
  • From: Peter Lynch
• Re: A suggestion for a Scanner
  • From: Luxman
• Re: A suggestion for a Scanner
  • From: Andrew Schulman
• Re: A suggestion for a Scanner
  • From: Dances With Crows
• Printer Linux9.3-Windows-network
  • From: Sven
• Re: A suggestion for a Scanner
  • From: General Schvantzkoph
• Re: A suggestion for a Scanner
  • From: simonp
• Re: Adding a video card.
  • From: Chris
• Re: After install can't boot to hard drive
  • From: Chris
• re:Gateway Astro Installation Issue
  • From: zzymurgy
• Re: Looking for a 17" lcd monitor - high resolution
  • From: cga
• Re: Adding a video card.
  • From: cga
• Re: Looking for a 17" lcd monitor - high resolution
  • From: cga
• Re: Looking for a 17" lcd monitor - high resolution
  • From: cga
• Re: Looking for a 17" lcd monitor - high resolution
  • From: cga
• Re: printing problems regarding PS PDF files
  • From: Peter D.
• Re: 64bit hardware - 32 or 64 bit O/S?
  • From: Rod Smith
• Re: After install can't boot to hard drive
  • From: phwashington
• Re: A suggestion for a Scanner
  • From: Luxman
• Re: Which tape drive
  • From: John-Paul Stewart
• Re: A suggestion for a Scanner
  • From: John-Paul Stewart
• Re: A suggestion for a Scanner
  • From: Luxman
• Re: A suggestion for a Scanner
  • From: Dances With Crows
• Re: After install can't boot to hard drive
  • From: Chris
• Re: A suggestion for a Scanner
  • From: Andrew Schulman
• Re: After install can't boot to hard drive
  • From: phwashington
• Re: A suggestion for a Scanner
  • From: ray
• Re: 64bit hardware - 32 or 64 bit O/S?
  • From: ray
• Re: A suggestion for a Scanner
  • From: General Schvantzkoph
• Re: 64bit hardware - 32 or 64 bit O/S?
  • From: General Schvantzkoph
• 64bit hardware - 32 or 64 bit O/S?
  • From: Peter Lynch
• Re: After install can't boot to hard drive
  • From: Chris
• Re: How to setup Red Hat AS3 on one laptop based on AMD Turbo 64?
  • From: Chris
• A suggestion for a Scanner
  • From: Luxman
• Re: printing problems regarding PS PDF files
  • From: arnuld
• Re: Recommend a video capture card?
  • From: Joseph2k
• Re: A hardware compatibility shock
  • From: Chris Cox
• Re: Looking for a 17" lcd monitor - high resolution
  • From: iforone
• Re: Which tape drive
  • From: JM
• 'still' no sound / M-Audio Audiophile 192 (Envy24 | ice1712) / alsa
  • From: Bastian Reich
• Re: A hardware compatibility shock
  • From: James McGill
• Re: 802.11g PCMCIA recommendation?
  • From: James McGill
• Re: Looking for a 17" lcd monitor - high resolution
  • From: Chris Cox
• After install can't boot to hard drive
  • From: phwashington
• Re: how to obtain bios info like serial number manufacturer ?
  • From: Lew Pitcher
• how to obtain bios info like serial number manufacturer ?
  • From: Biloute
• Re: can't find USB keys on Knoppix hard-drive install
  • From: maria
• Re: printing problems regarding PS PDF files
  • From: ray
• Osprey 560
  • From: corny
• Re: Looking for a 17" lcd monitor - high resolution
  • From: M.Kmann
• Re: Looking for a 17" lcd monitor - high resolution
  • From: anoneds@xxxxxxxxxxxx
• Re: Adding a video card.
  • From: Chris
• Wacom Graphire problems (Graphic tablet)
  • From: a . kapetanovic
• Re: can't find USB keys on Knoppix hard-drive install
  • From: iforone
• Re: Looking for a 17" lcd monitor - high resolution
  • From: Iwo Mergler
• Re: can't find USB keys on Knoppix hard-drive install
  • From: iforone
• Re: Looking for a 17" lcd monitor - high resolution
  • From: Chris
• printing problems regarding PS PDF files
  • From: arnuld
• Re: Rebuilding RAID-1 on SLES8 with Adaptec 2400A
  • From: andy
• Re: Looking for a 17" lcd monitor - high resolution
  • From: cga
• Re: interaction in gui mode is very slow
  • From: danish
• interaction in gui mode is very slow
  • From: linuxadmin
• Re: Looking for a 17" lcd monitor - high resolution
  • From: Bob Tennent
• Re: Looking for a 17" lcd monitor - high resolution
  • From: anoneds@xxxxxxxxxxxx
• Re: Looking for a 17" lcd monitor - high resolution
  • From: cga
• Re: Looking for a 17" lcd monitor - high resolution
  • From: Måns Rullgård
• Re: Adding a video card.
  • From: cga
• Re: Rebuilding RAID-1 on SLES8 with Adaptec 2400A
  • From: John-Paul Stewart
• Re: Looking for a 17" lcd monitor - high resolution
  • From: Bob Tennent
• Re: Adding a video card.
  • From: cga
• Re: Looking for a 17" lcd monitor - high resolution
  • From: cga

• Security
• UNIX
• Linux
• Coding
• Usenet

• Mailing-Lists
• Newsgroups
• About
• Privacy
• Search
• Imprint

linux.derkeiler.com  > Newsgroups  > comp.os.linux.hardware  > 2006-03