Mini-ITX type board

From: David Opencraft <Not.today@xxxxxxxxxxxxxxxxxx>
Date: 27 Apr 2006 20:28:23 GMT

Can anybody recommend a Mini-ITX type motherboard with kernel 2.6 support?
I have looked at the VIA range but hardware seems unstable especially DMA.

thanks
*** Posted via a free Usenet account from http://www.teranews.com ***
.

Follow-Ups:
- Re: Mini-ITX type board
  - From: J. Clarke
- Re: Mini-ITX type board
  - From: David Goodenough
- Re: Mini-ITX type board
  - From: iforone
- Re: Mini-ITX type board
  - From: ray

Prev by Date: Re: IDE, controller, ????
Next by Date: Re: IDE, controller, ????
Previous by thread: not yet supported USB-Ethernet adapter
Next by thread: Re: Mini-ITX type board
Index(es):
- Date
- Thread

Relevant Pages

kernel BUG at mm/slab.c:610
... I'm experimenting this kernel panic on 3 different ... I don't think this is related to buggy hardware ... Filesystem "hda1": Disabling barriers, not supported by the ... # ACPI Support ...
(Linux-Kernel)
PROBLEM: Unable to add subdirectory: Ooops in sys_add_file, called from kobject_register
... I got an Ooops while trying to load a little kernel module I wrote. ... The module's sysfs handling/initialization is based on ... and x86_64 hardware. ... # ACPI Support ...
(Linux-Kernel)
BUG: soft lockup in 2.6.25.5
... hardware, ... Running CentOS 5.2 with a kernel.org kernel ... # PCI IDE chipsets support ... # Input Device Drivers ...
(Linux-Kernel)
Re: system hangs with no warning or errors
... >> respond to pings over the network. ... so I don't think it is a hardware problem. ... And I'm not using a pre-emptible kernel. ... # ACPI Support ...
(Linux-Kernel)
oops during rsync
... Hopefully someone can help - I am beginning to believe this is a very intermittent hardware issue... ... then the kernel config and system map. ... # Firmware Drivers ... # ACPI Support ...
(Linux-Kernel)