Adaptec 2010S raid5 low performance
Hi.
I've configured raid 5 ( 3 disks SCSI 10K 17GB ) on Adaptec 2010S.
Write performance is lower than single disk. When I restore DB2 backup,
tabelspace creation time on single disk is ~6min and on raid5 is ~16min.
Cache on this array is on. Why performance of this array is so poor ? Is
it problem with this controller or this is some configuration problem ?
.
Relevant Pages
- adaptec 2010S raid5 low performance
... Write performance is lower then single disk. ... Cache on this array is on. ... Is it problem with this controller or this is some configuration problem? ...
(comp.os.linux.hardware) - Adaptec 2010S raid5 low performance
... Write performance is lower than single disk. ... Cache on this array is on. ... Is it problem with this controller or this is some configuration problem? ...
(comp.periphs.scsi) - Very low disk performance Highpoint 1820a
... Highpoint 1820a RAID 5 array. ... single disk on a bog standard ATA 100 controller: ...
(freebsd-current) - Very low disk performance Highpoint 1820a
... Highpoint 1820a RAID 5 array. ... single disk on a bog standard ATA 100 controller: ...
(freebsd-hackers) - Re: RAID 1 and recovery
... A single disk from a Linux Software RAID 1 Mirror should readable in another system so long as you also running MD on that system. ... You'll just need to import that disk as a new array on the second system; there is a flag to indicate that the second drive in the array is missing and can be added later. ... It's got a drive for the OS, and 2 further drives which I wish to set up in a RAID 1 array to use for the store. ...
(Fedora) |
|
